Total versus inhalable sampler comparison study for the determination of asphalt fume exposures within the road paving industry

Exposure to asphalt fumes has a threshold limit value (TLV of 0.5 mg m(-3) (benzene extractable inhalable particulate) as recommended by the American Conference of Governmental Industrial Hygienists (ACGIH). This reflects a recent change (2000) whereby two variables are different from the previous recommendation. First is a 10-fold reduction in quantity from 5 mg m(-3) to 0.5 mg m(-3). Secondly, the new TLV specifies the "inhalable" fraction as compared to what is presumed to be total particulate. To assess the impact of these changes, this study compares the differences between measurements of paving asphalt fume exposure in the field using an "inhalable" instrument versus the historically used 'total' sampler. Particle size is also examined to assist in the understanding of the aerodynamic collection differences as related to asphalt fumes and confounders. Results show that when exposures are limited to asphalt fumes, a 1:1 relationship exists between samplers, showing no statistically significant differences in benzene soluble matter (BSM). This means that for the asphalt fume ACGIH TLV, the 'total' 37-mm sampler is an equivalent method to the "inhalable" method, referred to as IOM (Institute of Occupational Medicine), and should be acceptable for use against the TLV. However, the study found that when confounders (dust or old asphalt millings) are present in the workplace, there can be significant differences between the two samplers' reported exposure. The ratio of IOM/Total was 1.37 for milling asphalt sites, 1.41 for asphalt paving over granular base, and 1.02 for asphalt over asphalt pavements.     

A Metamodeling Approach for Integrated Assessment of Air Quality Policies

A method is proposed to build integrated models (also called Metamodels) aimed at quantifying the economic efficiency of air quality policies. This Metamodeling approach is based on the coupling of two complementary models, that operate at different scales in space and time, and which represent the economic and the physical and chemical processes, respectively. The joint consideration of the physico-chemical and techno-economic structure of the pollution control problems permits a comprehensive evaluation of air pollution abatement strategies. The motivating pollution control problems include urban-regional air quality management through efficient energy and traffic control policies. A pilot study, exploiting data collected in the Geneva canton (Switzerland), is used to demonstrate the potential of the approach.     

Temperature and Concentration Effects in Biomonitoring of Organic Air Pollutants

Up to now only very few studies in biomonitoring of organic air pollutants have been published taking into account the strong influence mean temperatures have on the accumulation process into plants during the course of the exposition. Temperature governed sorption as well as the plants vitality pose a major source of uncertainty making inter-study comparisons difficult. Different surface-to-volume ratios of plant foliage lead to strongly varying concentration effects in different plant species. Moreover a plants content of waxes and lipids must be considered in order to relate xenobiotic concentrations to the compounds being most efficient in the bioaccumulation process. Some of these factors are evaluated in regard to the use of plants as biomonitors for organic air pollutants. Another aim is to deduce the mean ambient gas phase concentrations from PAH concentrations determined in the biomonitor plants using vegetation-air partitioning coefficients which have been corrected for temperature dependent sorption as well as the plants lipid content. Restrictions of such approaches and methods of biomonitoring in general are discussed.     

Fractionation of heavy metals and phosphorus in suspended sediments of the Yamuna river,India

The Yamuna river is the largest tributary of the Ganges river system. It originates in the Himalayas and flows through a varied geological terrain encompassing a large basin area. Metals Fe, Mn, Pb, Zn, Cu in different chemical fractions of suspended sediments such as exchangeable, carbonates, Fe–Mn oxides, organics and residual fractions were studied. Phosphorus associated with different chemical forms are discussed. The metals are mostly associated with residual fractions in the sediments followed by organics, Fe–Mn oxides, exhangeable and carbonates. Intensive use of chemical fertilizers and pesticides in agriculture in the basin affects the high inorganic phosphorus content in sediments.     

Fuel characteristics and emissions from biomass burning and land-use change in Nigeria

Nigeria is one of the 13 low-latitude countries that have significant biomass burning activities. Biomass burning occurs in moist savanna, dry forests, and forest plantations. Fires in the forest zone are associated with slash-and-burn agriculture; the areal extent of burning is estimated to be 80% of the natural savanna. In forest plantations, close to 100% of litter is burned. Current estimates of emissions from land-use change are based on a 1976 national study and extrapolations from it. The following non-carbon dioxide (CO₂) trace gas emissions were calculated from savanna burning: methane (CH₄), 145 gigagrams (Gg); carbon monoxide (CO), 3831 Gg; nitrous oxide (N₂O), 2 Gg; and nitrogen oxides (NO_x), 49 Gg. Deforestation rates in forests and woodlands are 300 × 10³ ha (kilohectare, or kha) and 200 × kha per year, respectively. Trace gas emissions from deforestation were estimated to be 300 Gg CH₄, 2.4 Gg N₂O, and 24 Gg NO_x. CO₂ emissions from burning, decay of biomass, and long-term emissions from soil totaled 125 561 Gg. These estimates should be viewed as preliminary, because greenhouse gas emission inventories from burning, deforestation, and land-use change require two components: fuel load and emission factors. Fuel load is dependent on the areal extent of various land uses, and the biomass stocking and some of these data in Nigeria are highly uncertain.     

The efficacy of a limestone doser to mitigate stream acidification in a Maryland coastal plain stream: Implications for migratory fish species

The objective of this two-year study was to determine the efficacy of an automated limestone slurry doser to neutralize acidic pulses and improve water quality conditions for enhancing survival of early life stages of migratory fish species in a Maryland coastal plain stream. Implications for survival of early life stages of migratory fish species such as yellow perch (Perca flavescens), white perch (Morone americana), blueback herring (Alosa aestivalis) and alewife (Alosa pseudoharengus) are discussed based on the improved chemical conditions in the dosed area of the stream. Despite problems with overdosing in 1991 and failure of the stage transducer to work properly in 1992, the doser was generally effective in neutralizing acidic pulses (pH depressions) in the stream during three major rain events in both years. Chemical conditions (pH and inorganic monomeric aluminum) reported in the non-dosed area during major rainfall events were potentially stressful to both alewife and blueback herring although neither species was reported spawning in the stream during either year. Mitigating the potential impact of acidic conditions on early life stages of important migratory fish species was not sufficient to ensure spawning. It is therefore recommended that habitat improvement measures and well designed fish stocking programs be implemented concurrently with doser operations if the goal is to create optimum spawning conditions for migratory species.     

Monitoring the condition of the Canadian forest environment: The relevance of the concept of ‘ecological indicators’

The Canadian forest environment is characterized by high spatial and temporal variability, especially in the west. Our forests vary according to climate, landform, and surficial geology, and according to the type, intensity, extent of, and the time since the last disturbance. Most Canadian forests have had a history of repeated acute, episodic disturbance from fire, insects, wind, diseases and/or logging, with a frequency of disturbance varying from a few decades to many centuries. These sources of variability have resulted in a complex and continually changing mosaic of forest conditions and stages of successional development.Monitoring the quality of this dynamic forested landscape mosaic is extremely difficult, and in most cases the concept of a relatively simple index of forest ecosystem quality or condition (i.e. an ecological indicator) is probably inappropriate. Such ecological indicators are better suited for monitoring chronic anthropogenically induced disturbances that are continuous in their effect (e.g. acid rain, heavy metal pollution, air pollution, and the greenhouse effect) in ecosystems that, in the absence of such chronic disturbance, exhibit very slow directional change (e.g. lakes, higher order streams and rivers). Monitoring the effects of a chronic anthropogenic disturbance to forest ecosystems to determine if it is resulting in a sustained, directional alteration of environmental quality will require a definition of the expected pattern of episodic disturbance and recovery therefrom (i.e. patterns of secondary succession in the absence of the chronic disturbance). Only when we have such a temporal fingerprint of forest ecosystem condition for normal patterns of disturbance and recovery can we determine if the ecosystem condition is being degraded by chronic human-induced alteration of the environment. Thus, degradation is assessed in terms of deviations from the expected temporal pattern of conditions rather than in terms of an instantaneous assessment of any particular condition. The concept of ecological rotation (the time for a given ecosystem to recover from a given disturbance back to some defined successional condition) is useful in the definition of these temporal fingerprints. This requires information on the intensity of disturbance, the frequency of disturbance, and the rate of successional recovery. Only when all three of these are known or estimated can statements be made as to whether the ecosystem is in a longterm sustainable condition or not.The somewhat overwhelming complexity of this task has led forest ecologists to use ecosystem-level computer simulation models. Appropriately structured and calibrated models of this type can provide predictions of the overall temporal patterns of ecosystem structure and functions that can be expected to accompany a given frequency and character of episodic disturbance. Such models can also be used to examine the long-term consequences of chronic disturbances such as acid rain and climatic change. Predictive ecosystem-level models should be used in conjunction with some method of stratifying the inherent spatial biophysical variability of the forest environment, such as the biogeoclimatic classification system of British Columbia.     

Migration of pollutants in groundwater: I. reduction of numerical dispersion by conformal mapping

The partial differential equations governing the migration of adsorbable pollutants undergoing 2-dimensional flow in saturated aquifers are presented. The analytical solution of these equations is rarely possible, and the use of mesh or grid techniques for numerical integration leads to so-called numerical dispersion, excessive dispersion which is an artifact associated with the numerical method. We discuss here the use of conformal mapping techniques to develop coordinate systems in which numerical dispersion transverse to the direction of flow is eliminated. Some simple illustrations are presented.     

Measurement of atmospheric concentrations of common household pesticides: A pilot study

Air concentrations of 28 of the most commonly used household pesticides were measured inside nine homes in Jacksonville, Florida, and compared with corresponding outdoor levels. The households selected were sorted into three categories according to the degree of pesticide indoor usage. Personal air monitoring was also performed on one resident of each household by means of a portable sampler, which was kept with the person at all times. Five of the pesticides were found in the air inside of the majority of the homes at concentrations as high as 15 gm^–3 (average concentrations, 12 ngm^–3 to 2.4 gm^–3). Indoor levels were generally one to two ordrrs of magnitude higher than surrounding outdoor air levels and personal air measurements were within ± 50% of corresponding indoor values. All samples were collected over 24-hr periods on polyurethane foam and analyzed by capillary colum gas chromatography with mass spectrometric and/or electron capture detection.     

Public participation in environmental monitoring: A means of attaining network capability

In the Puget Sound region of the United States a task force of community volunteers using bees monitored environmental pollution. This paper discusses advantages and limitations of public involvement in the assessment of regional environmental problems, particularly with respect to biological monitoring. This approach not only yielded extensive information about pollution levels but also was very cost effective.Work supported by Cooperative Agreement CR-810035-01-0 with the U.S. Environmental Protection Agency, Environmental Research Laboratory, Corvallis, Oregon, U.S.A.