Lead in Soil and Sediment in Iqaluit, Nunavut, Canada, and Links with Human Health

This study determined the spatial distribution of soiland of sediment-associated lead in Iqaluit, Nunavut.Samples were collected from the following areas:outside the built-up area of the town to reflectbackground concentrations; known or potential pointsources of lead, such as the Upper Base, the SylviaGrinnell Dump and the Metal Dump (North 40); andresidential and commercial areas of Iqaluit and Apex,a satellite community. In the laboratory, the <63 m sample fraction was analyzed for total lead andbioavailable lead, estimated by non-residual acidextractable lead content. The research findings revealthat elevated levels of bioavailable lead are presentin the study area. Total lead concentrations generallydo not exceed environmental guidelines. However, leadconcentrations in the Sylvia Grinnell Dump, and Apexand Iqaluit grid areas exceed health-based guidelines.The research concludes that there is not a serioushealth hazard posed by lead levels in the soil andsediment in the study area. However, severalenvironmental (elevated lead levels, bioavailableforms of lead and bare soil surfaces) and behaviouralfactors (vigorous and unsupervised play outside) maycreate a risk of lead exposure.     

The collection of PM10 for toxicological investigation: comparisons between different collecting devices

A positive correlation has been established between increased levels of airborne particulate pollution and adverse health effects, the toxicological mechanisms of which are poorly understood. For toxicologists to unambiguously determine thesemechanisms, truly representative samples of ambient PM₁₀ are required. This presents problems, as PM₁₀ collecting equipment commonly employed, such as the Tapered Element Oscillating Microbalance (TEOM®), heat the inflow toexclude moisture or use fibrous filters, resulting in a PM₁₀sample that may have undergone significant chemical change on thefilter surface or is contaminated by filter fibres. Other systems(i.e. Negretti and Partisol) can successfully collect PM₁₀ without chemical alteration or filter contamination. Comparativecollections from Port Talbot, S. Wales suggest that TEOMs and Negretti/Partisol systems collect different PM₁₀'s; the principle difference arising from the TEOM's heating chamber, which precipitates water-soluble ions and volatilises some organic components. This results in both the mass and compositionof the PM₁₀'s being altered. Particle size distributionsfor Negretti and Partisol collections highlighted differences mainly attributed to different flow rates. The results of thiswork demonstrate that simple correlations between PM₁₀ massand adverse health effects are problematic. Furthermore, elucidation of the complex fractionation and chemical changes indifferent collectors is necessary.     

Degradability and Sediment Sorption of an Alcohol Polyglycol Ether Surfactant Putatively Useful for the Control of Red Swamp Crayfish in Rice Fields

This work reports studies of the degradation rates of a fattyalcohol polyglycol ether non-ionic surfactant, Genapol OXD-080, putatively useful for the control of red swamp crayfish (Procambarus clarkii Girard) in rice fields under laboratory and field conditions. The influence of temperature,sediment site specificity and sorption were taken into account.The degradation kinetics of the surfactant depends on the experimental conditions: type of inocula and temperature. Thedistribution of this chemical in aquatic systems was also examined. Genapol OXD-080 was removed into the sedimentsreadily after application, and sorption was considered the majorpath of removal from the water phase. Data suggest that furtherstudies are required regarding the effects of Genapol OXD-080 in aquatic organisms resident in rice fields, in parallelwith the development of technologies related with the use ofsurfactants to control P. clarkii populations.     

Macroinvertebrate Regionalisation for use in the Management of Aquatic Ecosystems in Victoria, Australia

The development of a broader, more holistic approach to aquaticecosystem management has been called for in recent years. Physical and chemical objectives alone are no longer consideredsufficient for the protection of aquatic ecosystems and shouldbe supplemented with biological objectives. The ubiquitousand sedentary nature of macroinvertebrates, combined with theirmeasurable response to environmental conditions, favour their use as important indicators in environmental policies. To establish biological objectives, there is a need for a regionalframework to limit the variability between ecosystems. Past studies have demonstrated that an a posteriori regionalisationapproach may be more useful than an a priori approach in explaining single component (e.g. macroinvertebrates) patternsacross ecosystems. This is particularly important as aquaticresource management agencies often focus on one or twocomponents of the ecosystem to assess environmental health. This study uses an a posteriori method to delineate and describebiological regions based on edge and riffle macroinvertebrate data. The regionalisation will provide a framework for settingbiological objectives, based on the range of reference conditionsmeasured within each separate region. The objectives will includeregional checklists for taxa and biotic indices. Predictive modelling in the style of RIVPACS or AUSRIVAS will also be usedwithin each region to develop objectives, incorporating local, regional and systematic features as predictor variables.     

Monitoring of Seasonal Vegetables for Pesticide Residues

Market samples (60) of six seasonal vegetables were monitoredduring 1996–1997 to determine the magnitude of pesticidalcontamination. The estimation of insecticide residuesrepresenting four major chemical groups i.e. organochlorine,organophosphorous, synthetic pyrethroid and carbamate, was doneby adopting a multiresidue analytical technique employingGC-ECD and GC-NPD systems with capillary columns. The testedsamples showed 100% contamination with low but measurableamounts of residues. Among the four chemical groups, theorganophosphates were dominant followed by organochlorines,synthetic pyrethroids and carbamates. About 23% of the samplesshowed contamination with organophosphorous compounds abovetheir respective MRL values. More extensive studies coveringdifferent regions of Haryana state are suggested to get a clearidea of the magnitude of vegetable contamination with pesticideresidues.     

Economic and Spatial Impacts of an Existing Reserve Network on Future Augmentation

An optimization model for land reservation was developed that explicitly selects parcels in the most compact or contiguous manner possible while meeting habitat requirements and a budget limitation. The model was used to compare the effects of an existing reserve network on future parcel spatial locations and total cost. Using habitat and land value data from Josephine County, Oregon, it was found that a system of existing reserves created by various policies and overseen by different agencies can decrease future reserve compactness and contiguity, and increase total cost. This work suggests that coordinated planning can result in more efficient conservation efforts for less cost.     

Modelling of Materials Policies

This paper discusses the REAP1 model and its application for the analysis of CO₂ reduction and waste management policies for Japanese petrochemicals. The pros and cons of this modelling approach in comparison to other tools is elaborated. This is followed by a discussion of the model code and the modelling results. The results show that CO₂ policies can have significant impacts on waste flows and waste policies can have significant CO₂ benefits. As a consequence both effects must be considered in policy assessment. Pricing instruments are recommended instead of regulations because of the complex physical relations in the materials life cycle that extend beyond sector boundaries. A taxation approach is superior to a subsidy approach because rebound effects can be avoided.     

On-line solid phase extraction with polyurethane foam: trace level spectrophotometric determination of iron in natural waters and biological materials

This paper reports the development of a simple and accurate on-line procedure for preconcentration and determination of dissolved iron in waters and biological materials using unloaded polyether-type polyurethane foam as solid extractor. In the developed flow injection system, the analyte was preconcentrated from acidic aqueous medium as iron-thiocyanate complex with post-elution with ascorbic acid solution and spectrophotometric measurement with 1,10-phenanthroline as colorimetric reagent. In order to improve the performance of the system several chemical and flow variables were investigated as well as the effect caused by the presence of possible interferents. The method was validated by the analysis of two certified reference materials. Application of the methodology was carried out by the determination of dissolved iron content in eight natural water samples with different characteristics. The results were compared with those obtained by electrothermal atomic absorption spectrometry (ETAAS) and no statistical difference was observed. The detection limit was 0.75 microgram l-1 and the RSD was 1.2% for 2 min preconcentration time. At this condition, a productivity of 20 samples h-1 was achieved. Increasing the preconcentration time up to 3 min, a detection limit of 0.45 microgram l-1, an RSD of 1.5% and an analytical throughput of 15 h-1 were verified.     

Should foliar cadmium concentrations be expressed on a dry weight or dry ash weight basis?

Foliar analysis is a valuable tool for evaluating the pollution status of forests. However, the use of foliar diagnosis in large-scale surveys is a complicated process owing to the high variability within the crown. The method used to express foliar concentrations has often been found to diminish the variability. The effect of the method used to express element concentrations on the spatial variability of cadmium (Cd) in the leaves of crack willow (Salix fragilis L.) was investigated by sampling the leaves of one willow at 292 locations in the crown, each sampling location having a volume of 0.027 m3 (0.3 m x 0.3 m x 0.3 m). Cadmium showed a distinct spatial trend in the crown of the tree. Concentrations as low as 2.4 mg kg(-1) dry weight (DW) or 23.1 mg kg(-1) dry ash weight (DAW) were obtained in the top of the crown, and 10.6 mg kg(-1) DW or 73.0 mg kg(-1) DAW in the bottom of the crown. The lower relative standard deviation and weaker correlation with the sampling height support the use of DAW in large-scale surveys especially. The lower variability of the DAW Cd concentration makes this variable less sensitive to fluctuations caused by differences in growing conditions and sampling methodology. However, the majority of publications in this field report metal concentrations on a DW basis. Therefore, the restrictions set on the use of results expressed on a DAW basis in large-scale surveys of foliar metal concentrations have to be offset against the advantages offered by a reduction of the variability in metal concentrations.     

Optimization of a multielement sequential extraction method employing an experimental design approach for metal partitioning in soils and sediments

The optimisation of a simple multielement extraction method employing an experimental design approach is described. The method uses centrifugation to pass one extractant solution at varying pH through a contaminated soil sample. The nature and concentration of the acid, rate of centrifugation and time, number of sequential leachates and the ratio of extractant volume: sample weight have been studied in order to obtain the optimum conditions for extraction. A fractional factorial experimental design was performed, and the results were used to identify significance which was then evaluated by carrying out a central composite experimental approach. Once optimum conditions had been obtained, sequential leaches were analysed by ICP-AES and chemometrics were employed to identify the composition of each component. Comparisons have been made with previous studies and tentative assignments, based on well defined separated fractions and percentage compositions for individual elements, used to identify the different physico-chemical components in the sample.