Three-dimensional patterns of moisture, water repellency, bromide and pH in a sandy soil

Soil water repellency might lead to preferential flow of water and solutes through the unsaturated zone of soils. To study this process in a water repellent sandy field soil, a bromide tracer had been applied on a 2.2 m long and 0.4 m wide plot. The bromide application rate was 8 g/m², and the plot was sampled using 100 cm³ steel cylinders after 52 mm of rainfall in 12 days. A total of seven layers were sampled to a depth of 74 cm. Each layer was sampled at 240 locations in a 40 by 6 grid. All samples were used for the determination of soil water content, degree of actual and potential water repellency, bromide concentration and pH. The spatial distribution of these properties was visualized three-dimensionally and compared. The degree of water repellency, bromide concentration, and pH distribution bore close resemblance to the fingered flow induced soil water content distribution. The degree of potential water repellency was relatively low in places with such fingers. Actual water repellency occurred between the fingers at the dry spots. Bromide was not found, or only in very low concentrations, in such places. Bromide depth profiles clearly indicated the occurrence of diverging flow in the wetter subsoil. Most likely, manuring activities during the last decades resulted in relatively high pH values in the topsoil, and in the subsoil along the recurring fingered flow pathways.     

Chlorohydrocarbons, PCB congeners, polychlorodioxins, furans and dibenzothiophenes in pine needles in the vicinity of a metal reclamation plant

Chlorohydrocarbons, PCB congeners, polychlorodioxins, furans and dibenzothiophenes in pine needles in the vicinity of a metal reclamation plant were analyzed by GC/ECD and GC/MS. Wax and the rest of the needles were analyzed separately. As a rule the concentrations of -HCH (0.5–13.6 ng/g), γ-HCH (0.4–7.3 ng/g), HCB (0.2–3.4 ng/g), PCB congeners (0.2–67 ng/g), PCDDs and PCDFs were higher in the older needles. The ratio of the concentration in the wax to the concentration in the rest of the needles was higher in the younger needles. The concentrations of PCB congeners, TeCDDs and TeCDFs were higher in the needles collected in the area nearest to the plant. The samples, obviously, contained tri- and tetrachlorodibenzothiophenes but these were not determined quantitatively due to interfering peaks in GC/MS.     

Natural phillipsite as a matrix for a slow-release formulation of oxamyl

The performance of phillipsite as a matrix for slow-release formulation of oxamyl [N,N-dimethyl-2-methylcarbamoyl-oxymino-2-(methylthio)acetamide] was tested. The adsorption kinetics followed a first-order law, and the adsorption isotherm fitted well in a two-surface Langmuir model, suggesting a double mechanism of interaction between oxamyl and the sorbent. The sorption mechanism, studied by FTIR, provided two fractions of oxamyl. The first one is sorbed on the mineral surface, linked by H-bonding, and the second one is constituted by a multilayer of oxamyl molecules linked by a water bridge between them. The release kinetics of oxamyl from a substratum zeolite-oxamyl also follows a first-order law, with two stages that correspond to both fractions of oxamyl previously detected.     

Fractionation of fulvic acids: characteristics and complexation with copper

Two fulvic acid samples isolated from Suwannee river (International Humic Substance Society) and Feeitsuey reservoir were subjected to gel filtration chromatography (GFC) for molecular size fractionation. The GFC-eluted samples were separated into three groups corresponding to the molecular weight ranges: < 220, 220-1000, and 1000-4000. Fluorescence quenching techniques were employed for determining the conditional stability coefficient and kinetic parameters of copper complexation with the three fractions of fulvic acids. Experimental conditions were pH 6, 5 x 10(-5)m total copper and 5 mg C litre(-1) of fulvic acids. The conditional stability coefficients of the fulvic acid fractions were in the order of 0.9-3.3 x 10(5)m(-1), and the forward and reverse rate constants were in the order of 6.9-12.4 x 10(3)m(-1) s(-1) and 3.5-8.0 x 10(-2) s(-1). Information could be useful in modelling copper transport in the hydrosphere.     

Linear least squares method for time series analysis with an application to a methane time series

A simple method of time series analysis, based upon linear least squares curve fitting, is developed. The method's advantages and disadvantages are discussed, and an example is presented using the Vostok Core methane record.     

NLEAP model simulation of climate and management effects on N leaching for corn grown on sandy soil

The Nitrate Leaching and Economic Analysis Package (NLEAP) model was used to evaluate effects of climate and N fertility on nitrate leaching from a 3-yr field experiment of continuous corn (Zea mays L.). Half of the plots were randomly chosen to be either nonirrigated or irrigated (based upon calculated potential evapotranspiration). Three replications of nitrogen (N) fertility (56, 112 and 224 kg ha⁻¹) were used. Soil was a Hecla sandy loam to loamy sand (Pachic Udic Haploboroll). Soil and climate data were from the upper Midwest U.S.A. database for NLEAP. On-site data were used in the model when available.This study shows that NLEAP is capable of integrating data collected for nonirrigated and irrigated conditions on sandy soil for a wide range of N treatments and predicting the nitrate available for leaching (NAL). Precipitation distribution and amount were different in each year. Calculated NAL provided an excellent indicator of potential nitrate leaching hazard. NLEAP output showed that leaching of residual N on this sandy soil is very sensitive to early-spring precipitation. The NLEAP model provided valuable insights concerning effects of climate and N and irrigation management on N leaching. To obtain optimum yields while minimizing nitrate leaching, this study indicates the need to use soil and plant-tissue testing, post-emergence N-fertilizer application, and modem irrigation-scheduling technology. Also, use of the NLEAP model along with field-plot experiments provide additional important information concerning timing of N-leaching events relative to climate and an additional assessment of the effectiveness of fertilizer-N management decisions.     

Pharmacokinetic model of dioxin and furan levels in adipose tissue from Sawmill work involving chlorophenate fungicides

Sawmill workers in British Columbia (B.C.), Canada, have been exposed to chlorophenate fungicides which are known to be contaminated with polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs). Due to concern about the potential of these workers to have significant body burdens of PCDD/Fs, and the absence of measurements in these worker, a single-compartment pharmacokinetic model was developed to estimate the concentration of PCDD/Fs in the fat tissue of the sawmill workers. Data from a large cohort of B.C. sawmill workers and literature-based data on chlorophenate exposures and PCDD/F concentrations in chlorophenates were used in Monte Carlo simulations to predict a PCDD/F body burden distribution. The median concentrations of HxCDF and HpCDF predicted using the model for the B.C. sawmill worker population exceeded the range measured in unexposed populations. PeCDF and OCDF concentrations exceeded the range measured in unexposed populations at the 70th percentile of the model-predicted distribution, and PeCDD at the 90th percentile. The primary limitation of the model was the scarcity of input data about actual dermal and inhalation exposures to chlorophenates.     

Growth and nutrition of Quercus rubra L. seedlings and mature trees after three seasons of ozone exposure

Seedling growth and nutritional status have been shown to be sensitive to ozone, but the influence of multi-season ozone exposure on mature tree growth and nutrition has not been examined. To determine if seedlings and mature trees were similarly affected by ozone exposure, growth and nutrient concentrations in northern red oak (Quercus rubra L.) 4-year-old seedlings and 32-year-old mature trees were examined after treatment with subambient, ambient and twice ambient concentrations of ozone for three growing seasons. SUM00 values summed over the three growing seasons were 147, 255 and 507 ppm-h, respectively, for the subambient, ambient and twice ambient exposures. For mature trees, no influence of ozone treatment on lower stem diameter growth, stem growth within the mid-canopy and foliar biomass was observed. Seedling height was increased by ozone, but biomass and diameter were unaffected. A reduction in the specific leaf weight of leaves in response to ozone coincident with the loss of recurrent flushing was observed in seedlings. Ozone exposure reduced foliar nitrogen concentrations and increased woody tissue nutrient concentrations in seedlings and mature trees at the end of the third growing season. These results suggest an influence of ozone on retranslocation processes in seedlings and mature trees.     

Sequential extraction analysis of heavy metals using a chelating agent (NTA) to counteract resorption

The geochemical partitioning of Pb, Ni and Zn in contaminated quartz-rich sediment and soil samples was characterized by sequential extraction analysis in the presence and absence of nitrilotriacetic acid (NTA). With NTA, levels of metals recovered are higher in the earlier steps and lower in the later steps of the procedure. This suggests that post-extraction resorption is effectively counteracted by chelation, thereby improving the accuracy of the method. An NTA concentration of 200 mg liter(-1) appears to be sufficient for counteracting resorption without causing significant dissolution of non-targeted phases in the samples studied. However, experiments using reference materials spiked with solutions containing Pb, Ni, Cu and Zn suggest that resorption will remain a problem when large amounts of strong sorbents such as organic matter are present. The results also show that although post-extraction resorption does occur in the absence of NTA, the magnitude of resorption is small (<20 to 30% of the summed total of metal present in the sample) in quartz-rich sediments.