Combined inverse modeling approach and load duration curve method for variable nitrogen total maximum daily load development in an agricultural watershed

Purpose  

Nonpoint sources (NPS) pollution has been an important cause for water quality impairment worldwide. To take the temporal variations of both NPS pollution and in-stream attenuation into consideration, an inverse modeling approach and the load duration curve (LDC) method were combined for variable nutrient total maximum daily load (TMDL) development.     

Mercury distribution in seawater discharged from a coal-fired power plant equipped with a seawater flue gas desulfurization system

Background and purpose  

More and more coal-fired power plants equipped with seawater flue gas desulfurization systems have been built in coastal areas. They release large amount of mercury (Hg)-containing waste seawater into the adjacent seas. However, very limited impact studies have been carried out. Our research targeted the distribution of Hg in the seawater, sediment, biota, and atmosphere, and its environmental transportation.     

Size-exclusion chromatographic study of ECF and TCF softwood kraft pulp bleaching liquors

Background, aims, and scope  

Currently, elemental chlorine-free (ECF) and totally chlorine-free (TCF) bleaching systems are widely used for pulp production. Low and medium molecular weight lignin break-down products are known to have harmful effects on the environment. According to some recent results, also high molecular weight (HMW) material consisting mainly of lignin and carbohydrates may cause toxic effects to the environment. For these reasons, toxicity and structure studies of HMW materials are of great importance. This investigation is a part of a larger project to obtain more structure information of HMW materials and toxicity of ECF and TCF bleaching effluents. Size-exclusion chromatography (SEC) has been commonly used for the characterization of organic macromolecules such as lignin, but to our knowledge, no reports have appeared dealing with the comparison of SEC of ECF and TCF bleaching liquors. The aim of the present study was to get more information about the molecular weight distribution (MWD) of HMW fractions of waste liquors from ECF and TCF bleaching sequences by SEC.     

Accumulation,biotransformation, and biochemical responses after exposure to arsenite and arsenate in the estuarine polychaete <Emphasis Type="BoldItalic">Laeonereis acuta</Emphasis> (Nereididae)

Introduction  

This study aimed to analyze antioxidant responses and oxidative damage induced by two inorganic forms of arsenic (As; As^III and As^V) in an estuarine polychaete species, Laeonereis acuta (Nereididae). The capacity of arsenic biotransformation was also evaluated through the methylation process considering the activity of a key enzyme involved in the metabolization process.     

Polychlorinated biphenyls and organochlorinated pesticides in birds from a contaminated region in South China: association with trophic level,tissue distribution and risk assessment

Purpose  

Birds have been used successfully for biomonitoring of the levels and effects of persistent organic pollutants (POPs) in the environments; however, there is exceedingly little data on organochlorinated pesticide (OCPs) and polychlorinated biphenyls (PCBs) residues in bird inhabiting in China. In the present study, we detected the concentrations of PCBs, dichlorodiphenyltrichloroethane and its metabolites (DDTs) and hexachlorocyclohexanes (HCHs) in muscle, liver and kidney of birds that inhabit in an e-waste recycling site. Associated with the stable isotope ratio (δ ¹⁵N), we investigated the effect of trophic level on the body burdens of persistent contaminants in birds. The tissue distributions of contaminants in these birds were examined, and a preliminary risk assessment was also conducted.     

Detection of human-induced environmental disturbances in a show cave

Purpose  

We investigated the effects of human-induced disruption in a subterranean stable environment containing valuable Palaeolithic paintings and engravings (Ardales Cave, Southern Spain) using a double analytical approach.     

Investigation on gene transfer from genetically modified corn (Zea mays L.) plants to soil bacteria

Knowledge about the prevalence and diversity of antibiotic resistance genes in soil bacteria communities is required to evaluate the possibility and ecological consequences of the transfer of these genes carried by genetically modified (GM) plants to soil bacteria. The neomycin phosphotransferase gene (nptII) conferring resistance to kanamycin and neomycin is one of the antibiotic resistance genes commonly present in GM plants. In this study, we investigated kanamycin-resistant (Km(R)) and neomycin-resistant (Nm(R)) soil bacterial populations in a 3-year field trial using a commercial GM corn (Zea mays L.) carrying the nptII gene and its near isogenic line. The results showed that a portion (2.3 - 15.6 %) of cultivable soil bacteria was naturally resistant to kanamycin or neomycin. However, no significant difference in the population level of Km(R) or Nm(R) soil bacteria was observed between the GM and non-GM corn fields. The nptII gene was not detected in any of the total 3000 Km(R) or Nm(R) isolates screened by PCR. Further, total soil bacterial cells were collected through Nycodenz gradient centrifugation and bacterial community DNA was subjected to PCR. Detection limit was about 500 cells per gram of fresh soil. Our study suggests that the nptII gene was relatively rare in the soil bacterial populations and there was no evidence of gene transfer from a GM corn plant to soil bacteria based on the data from total soil bacterial communities.     

Development of a country-specific CO2 emission factor for domestic anthracite in Korea, 2007�C2009

Introduction

Korea has been making efforts to reduce greenhouse gas (GHG) emissions, including a voluntary commitment to the target of a 30% reduction, based on business-as-usual of the total GHG emission volume, by 2020; 2006 IPCC Guidelines provided default values, applying country-specific emission factors was recommended when estimating national greenhouse gas emissions.

Results and discussion

This study focused on anthracite produced in Korea in order to provide basic data for developing country-specific emission factor. This study has estimated CO₂ emission factors to use worksheet of which five steps consisted according to the fuel analysis method.

Conclusion

As a result, the average of net colorific value for 3 years (2007??2009) was 4,519 kcal/kg, and the CO₂ emission factor was calculated to be 111,446 kg/TJ, which is about 11.8% lower than the 2006 IPCC guidelines default value, and about 7.9% higher than the US EPA emission factor.     

Detection of antibacterial-like activity on a silica surface: fluoroquinolones and their environmental metabolites

Background, scope, and aims

Antibacterial fluoroquinolones (FQs) are third-generation antibiotics that are commonly used as therapeutic treatments of respiratory and urinary tract infections. They are used far less in intensively farmed animal production systems, though their use may be permitted in the veterinary treatments of flocks or in medicated feeds. When used, only a fraction of ingested parent FQ actually reaches the in vivo target site of infection, while the remainder is excreted as the parent FQ and its metabolized products. In many species?? metabolism, enrofloxacin (EF) is converted into ciprofloxacin (CF) while both FQs are classified as parent FQs in human treatments. It is therefore likely that both FQs and their metabolic products will contribute to a common pool of metabolites in biological wastes. Wastes from intensive farming practices are either directly applied to agricultural land without treatment or may be temporarily stored prior to disposal. However, human waste is treated in sewage treatment plants (STPs) where it is converted into biosolids. In the storage or treatment process of STPs, FQs and their in vivo metabolites are further converted into other environmental metabolites (FQEMs) by ex vivo physicochemical processes that act and interact to produce complex mixtures of FQEMs, some of which have antibacterial-like activities. Biosolids are then often applied to agricultural land as a fertilizer amendment where FQs and FQEMs can be further converted into additional FQEMs by soil processes. It is therefore likely that FQ-contaminated biowaste-treated soils will contain complex mixtures of FQEMs, some of which may have antibacterial-like activities that may be expressed on bacteria endemic to the receiving agricultural soil environment. Concern has arisen in the scientific and in the general community that repeated use of FQ-contaminated biowaste as fertilizer amendments of nutrient-impoverished agricultural land may create a selective environment in which FQ-resistant bacteria might grow. The likelihood of this happening will depend, to some extent, on whether bioactive FQEMs are first synthesized from the parent FQs by the action and interaction of in vivo and ex vivo processes producing bioactive FQEMs in biowastes and biosolids. The postulated creation of a selective environment will also depend, in part, on whether such bioactive FQEMs are biologically available to bacteria, which may, in turn, be influenced by soil type, amendment regime, and the persistence of the bioactive FQEMs. Additionally, soil bacteria and soil processes may be affected in different ways or extents by bioactive FQEMs that could possibly act additively or synergistically at ecological targets in these non-target bacteria. This is an important consideration, since, while parent FQs have well-defined ecological targets (DNA gyrase and topoisomerase IV) and modes of bactericidal action, the FQEMs and their possible modes of action on the many different species of soil bacteria is less well studied. It is therefore understandable that there is a lack of conclusive evidence directly attributing biosolid usage to any increase in FQ-resistant bacteria detected in biowaste-amended agricultural soil. However, a lack of evidence may simply imply that a causal relationship between biosolid usage programs and any detection of low levels of FQ-resistant bacteria in soils has yet to be established, rather than an assumption of no relationship whatsoever. Based on results presented in this paper, the precautionary principle should be applied in the usage of FQ-contaminated biosolids as fertilizer amendments of agricultural land. The aim of this research was to test whether any bioactive FQEMs of EF could be synthesized by aerobic fermentation processes using Mycobacterium gilvum (American Tissue Culture Collection) and a mixed culture of microorganisms derived from an agricultural soil. High-performance thin-layer chromatography (HPTLC) and bioautography were tested as screening techniques in the detection and analysis of bioactive FQEMs.

Materials and methods

FQEMs derived from M. gilvum and mixed (soil) culture aerobic ferments were fractionated using preparative HPTLC. A standard strain of Escherichia coli was then used as the reporter organism in a bioautography assay in the detection of bioactive-FQEMs on a mid-section of the HPTLC plate. Plate sections were reassembled, and a photograph was taken under low-intensity ultraviolet (UV) light to reveal regions that contained analytes that had UV chromophores and antibacterial-like activities.

Results and discussion

Many fractionated FQEMs displayed antibacterial-like activity while bound to silica gel HPTLC plates. These results also provide evidence that sufficient quantities of biologically active FQEMs were biologically available from a silica gel surface to prevent the adherent growth of E. coli. Six to seven FQEMs derived from EF using aerobic fermentation processes had antibacterial-like activities, while two FQEMs were also detectable using UV light. Furthermore, similar banding patterns of antibacterial-like activity were observed in both the monoculture (M. gilvum) and mixed culture bioautography assays, indicating that similar processes operated in both aerobic fermentations, either producing similar biologically active FQEMs or biologically active FQEMs that had similar physicochemical properties in both ferments. The simplest explanation for these findings is that the tested agricultural soil also contained mycobacteria that metabolized EF in a similar way to the purchased standard monoculture M. gilvum. Additionally, the marked contrast between the bioautography results and the UV results indicated that the presence of UV chromophores is not a prerequisite for the detection of antibacterial-like activity.

Conclusions

A reliance on spectrophotometric techniques in the detection of bioactive FQEMs in the environment may underestimate component antibacterial-like activity and, possibly, total antibacterial-like activity expressed by EF and its FQEMs. The described bioautography method provides a screening technique with which antibacterial-like activities derived from EF and possibly other FQs can be detected directly on silica gel HPTLC plates.

Recommendations

It is recommended that both bioassay and instrumental analytical techniques be used in any measurement of hazard and risk relating to antibacterial-like activities in the environment that are derived from fluoroquinolone antibiotics and their environmental metabolites.     

Removal of Pb(II) and Cd(II) ions from water by Fe and Ag nanoparticles prepared using electro-exploding wire technique

Purpose

This work aimed at investigating the adsorption of lead and cadmium onto Fe and Ag nanoparticles for use as a water contaminant removal agent as a function of particle type, sorbent concentration, and contact time.

Methods

Fe and Ag spherical nanoparticles were prepared in water by the lab-made electro-exploding wire (EEW) system and were investigated for their structure properties. Adsorption experiments were carried out at room temperature and pH 8.3 water solutions.

Results

The removal/adsorption of both Pb(II) and Cd(II) ions was found to be dependent on adsorbent dosage and contact time. Pb(II) adsorption onto Fe and Ag nanoparticles showed more or less similar efficiency and behavior. The kinetic data for the adsorption process obeyed pseudo second-order rate equations. The calculated equilibrium adsorption capacities (q _e) were 813 and 800 mg/g for Pb sorption onto Fe and Ag nanoparticles, respectively. Cd(II) ion adsorption onto Fe nanoparticles obeyed pseudo second-order rate equations with q _e equal to 242 mg/g, while their adsorption onto Ag nanoparticles obeyed pseudo first-order rate equations with q _e of 794 mg/g. The calculated q _es are in quite agreement with the experimental values. The removal/uptake mechanisms of metal ions involved interaction between the metal ion and the oxide/hydroxyl layer around the spherical metallic core of the nanoparticle in water medium.

Conclusion

Fe and Ag nanoparticles prepared using the EEW technique exhibited high potentials for the removal of metal ions from water with very high adsorption capacities, suggesting that the EEW technique can be enlarged to generate nanoparticles with large quantities for field or site water purification.