Serum PCBs and organochlorine pesticides in Slovakia: age, gender, and residence as determinants of organochlorine concentrations

We measured organochlorine concentrations of 15 polychlorinated biphenyl congeners and six organochlorine pesticides (PCB28, 52, 101, 123(+149), 118, 114, 153, 105, 138(+163), 167, 156(+171), 157, 180, 170, 189, alpha-, beta-, gamma-HCH, HCB, p,p'-DDT and p,p'-DDE) in 2047 subjects from contaminated and background areas of eastern Slovakia. Data were collected in 2001 and analyzed by high-resolution gas chromatography with electron capture detection in 2002-2003. Elevated levels persist in subjects from Michalovce district, site of former production facility, after almost 20-years since the end of the PCB manufacturing. Sum of 15 PCB congeners was 3105 ng/g of lipid in the Michalovce district versus 871 ng/g of lipid for subjects from the background districts of Svidnik and Stropkov. Relatively high concentration in children from the Michalovce district, sum PCB = 766 ng/g of lipid versus 372 ng/g of lipid in children from background area suggest ongoing exposure from environmental reservoirs and contaminated food. Consistent differences between genders in both contaminated and background areas are reported here. Levels in males are about 20% higher in both districts. Levels of organochlorine pesticides, particularly of DDT metabolite DDE and hexachlorobenzene are also elevated in the Michalovce district, reflecting intensive use of pesticides in agriculture in the past. About 30% decrease in serum organochlorine levels was observed in comparison with our earlier samples collected in 1998. These results suggest that contamination with PCBs still remains a source of relatively high environmental exposure for subjects in the Michalovce district.     

Photocatalytic oxidation of soot by P25 TiO2 films

The photomineralisation of soot by P25 titania films is studied using FT-IR and the process shown to involve the oxidation of carbon to CO2 exclusively. The efficiency of this process is low, however, with a formal quantum efficiency of 1.1 x 10(-4) molecules of carbon oxidized per incident photon of UVA light. The cause of this low efficiency is attributed largely to the less than intimate contact between the fibrous soot layer and the surface of the photocatalyst.     

In situ and laboratory bioassays using Poecilia reticulata Peters, 1859 in the biomonitoring of an acidic lake at Camaçari, BA, Brazil

The suitability and viability of acute in situ bioassays were investigated in the biomonitoring program of an acidic lake contaminated with sulphur residues. Responses of organisms observed in laboratory and in situ bioassays were also assessed to determine whether or not they were similar and comparable, regarding accuracy and precision. Newborn Poecilia reticulata were employed as test organisms and exposed to the same water samples under in situ and laboratory conditions. Mortality/immobility was the endpoint assessed and dead/immobile organisms were counted at various time intervals during exposure. The mean calculated LT50 values and 95% confidence intervals were 1.61 (1.36-1.87) h in the laboratory bioassays and 0.72 (0.55-0.89) h in the in situ bioassays. Statistical comparison of these values revealed a significant difference (p<0.05). In situ bioassays were more accurate than those carried out in the laboratory, demonstrating higher sensitivity and better reproduction of what occurs in nature, while laboratory bioassays were more precise.     

Passive air sampler as a tool for long-term air pollution monitoring: Part 1. Performance assessment for seasonal and spatial variations

The potential of passive air sampling devices (polyurethane foam disks) to assess the influence of local sources on the quality of the surrounding environment was investigated. DEZA Valasske Mezirici, a coal tar and mixed tar oils processing plant, and Spolana Neratovice, a chemical factory with the history of high production of organochlorinated pesticides (OCPs), were selected as the point sources of PAHs, and OCPs, respectively. Levels of PCBs, OCPs and PAHs were determined for all sampling sites and sampling periods. The study brought useful data about the air concentrations of POPs in the investigated regions. More important, it provided information on the transport and fate of POPs in the vicinity of local sources of contamination useful for the estimation of their influence. Very good capability of passive samplers to reflect temporal and spatial fluctuation in concentrations of persistent organic pollutants in the ambient air was confirmed which makes them applicable for monitoring on the local scale.     

Effects of medetomidine, a novel antifouling agent, on the burrowing bivalve Abra nitida (Müller)

The effects of medetomidine, a novel antifouling candidate, on the burrowing bivalve Abra nitida were studied. The burrowing behaviour, sediment reworking activity and faeces production were assessed after 24 h exposure of A. nitida to sublethal concentrations of medetomidine. Medetomidine caused a significant decrease in the burrowing response and in the sediment reworking activity. The median effective concentrations (EC50) were 430 nM (86 microg/l) and 4.4 nM (0.9 microg/l), respectively. No effects on the faeces production were detected. Although significant effects of medetomidine on A. nitida were registered, a reversibility of the effects was observed when 24 h-exposed animals were incubated in clean seawater and sediment for 24 h. Considerations relating to the future commercialisation of medetomidine for antifouling purposes are discussed.     

State of energy consumption and CO2 emission in Bangladesh

Carbon dioxide (CO2) is one of the most important gases in the atmosphere, and is necessary for sustaining life on Earth. It is also considered to be a major greenhouse gas contributing to global warming and climate change. In this article, energy consumption in Bangladesh is analyzed and estimates are made of CO2 emission from combustion of fossil fuel (coal, gas, petroleum products) for the period 1977 to 1995. International Panel for Climate Change guidelines for national greenhouse gas inventories were used in estimating CO2 emission. An analysis of energy data shows that the consumption of fossil fuels in Bangladesh is growing by more than 5% per year. The proportion of natural gas in total energy consumption is increasing, while that of petroleum products and coal is decreasing. The estimated total CO2 release from all primary fossil fuels used in Bangladesh amounted to 5072 Gigagram (Gg) in 1977, and 14 423 Gg in 1995. The total amounts of CO2 released from petroleum products, natural gas, and coal in the period 1977-1995 were 83 026 Gg (50% of CO2 emission), 72 541 Gg (44% of CO2 emission), and 9545 Gg (6% CO2 emission), respectively. A trend in CO2 emission with projections to 2070 is generated. In 2070, total estimated CO2 emission will be 293 260 Gg with a current growth rate of 6.34% y . CO2 emission from fossil fuels is increasing. Petroleum products contribute the majority of CO2 emission load, and although the use of natural gas is increasing rapidly, its contribution to CO2 emission is less than that of petroleum products. The use of coal as well as CO2 emission from coal is expected to gradually decrease.     

Phytostabilization of a metal contaminated sandy soil. I: Influence of compost and/or inorganic metal immobilizing soil amendments on phytotoxicity and plant availability of metals

In a lysimeter set-up, compost addition to an industrial contaminated soil slightly reduced phytotoxicity to bean seedlings. The "Phytotoxicity Index" (on a scale from 1 to 4) decreased from 3.5 to 2.8. The same treatment also reduced metal accumulation in grasses: mean Zn, Cd and Pb concentrations decreased respectively from 623 to 135, from 6.2 to 1.3 and from 10.7 to <6 mg kg-1 dry weight. When combined with inorganic metal immobilizing amendments, compost had a beneficial effect on plant responses additional to the inorganic amendments alone. Best results were obtained when using compost (C)+cyclonic ashes (CA)+steel shots (SS). The "Phytotoxicity Index" decreased to 1.7, highest diversity of spontaneously colonizing plants occurred, and metal accumulation in grasses reduced to values for uncontaminated soils. Based on the first year evaluation, C+CA+SS showed to be an efficient treatment for amendment assisted phytostabilization of the contaminated Overpelt soil.     

Metal concentrations in edible mushrooms following municipal sludge application on forest land

In the context of biosolids utilisation in forestry, effects of sludge application on mushroom metal concentration were studied in six sites of maritime pine forests in the South-West of France. Municipal sludge were applied at a rate of 6 T dry matter per hectare. Edible mushrooms were collected two years after sludge application. As, Cd, Cu, Hg, Pb, Se and Zn concentrations were determined. Results showed a high variability for trace element concentrations in mushrooms collected from control areas. No significant correlation was found between soil parameters (pH and trace elements concentrations) and mushroom trace element concentrations. Even if the concentration of trace metals increased in the soils, sludge application did not affect As, Cu, Se and Zn concentrations in carpophores but slightly increased Cd, Pb and Hg concentrations on some sites. This effect is dependent on sludge type and sites.     

Effects of initial saturation on properties modification and displacement of tetrachloroethene with aqueous isobutanol

Packed column experiments were conducted to study effects of initial saturation of tetrachloroethene (PCE) in the range of 1.0-14% pore volume (PV) on mobilization and downward migration of the non-aqueous phase liquid (NAPL) product upon contact with aqueous isobutanol ( approximately 10 vol.%). This study focused on the consequences of swelling beyond residual saturation. Columns were packed with mixtures of neat PCE, water and glass beads and waterflooded to establish a desired homogeneous residual saturation, and then flooded with aqueous isobutanol under controlled hydraulic conditions. Results showed a critical saturation of approximately 8% PV for these packed column experimental conditions. At low initial PCE saturations (<8% PV), experimental results showed reduced risk of NAPL-product migration upon contact with aqueous isobutanol. At higher initial PCE saturations (>8% PV), results showed NAPL-product mobilization and downward migration which was attributed to interfacial tension (IFT) reduction, swelling of the NAPL-product, and reduced density modification. Packed column results were compared with good agreement to theoretical predictions of NAPL-product mobilization using the total trapping number, N(T). In addition to the packed column study, preliminary batch experiments were conducted to study the effects of PCE volumetric fraction in the range of 0.5-20% on density, viscosity, and IFT modification as a function of time following contact with aqueous isobutanol ( approximately 10 vol.%). Modified NAPL-product fluid properties approached equilibrium within approximately 2 h of contact for density and viscosity. IFT reduction occurred immediately as expected. Measured fluid properties were compared with good agreement to theoretical equilibrium predictions based on UNIQUAC. Overall, this study demonstrates the importance of initial DNAPL saturation, and the associated risk of downward NAPL-product migration, in applying alcohol flooding for remediation of DNAPL contaminated ground water sites.     

Variations of bacterial community structure in flooded paddy soil contaminated with herbicide quinclorac

The denaturing gradient gel electrophoresis (DGGE) method was applied to determine the relative genetic complexity of microbial communities in flooded paddy soil treated with herbicide quinclorac (3,7-dichloro-8-quinoline-carboylic acid). The results obtained showed a significant effect of quinclorac on the development of bacterial populations in soils contaminated with different concentrations of the herbicide at the early time after application. In general, however, the number of populations of the same soil sample treated with the same concentration of the quinclorac differed obviously with increasing incubation time within the early 8 weeks. The scale of differences in banding patterns-showed that the microbial community structures of the quinclorac-treated and non-quinclorac-treated soils were not significantly different after 21 weeks of incubation. Quantification, as demonstrated in this paper, was studied by establishing dose-response relationships. Significant pattern variations were quantified. Prominent DGGE bands were excised, cloned and sequenced to gain insight into the identities of predominant bacterial populations. The majority of DGGE band sequences were related to bacterial genera Clostridium, Sphingobacterium, Xanthomonas and Rhodococcus.