外控电势对Ch-1菌株生长及Cr(Ⅵ)还原的影响

为进一步优化Ch-1菌株对碱性含铬废水的处理及铬渣的解毒效果,以细菌总数和6价铬的还原率为指标,详细考察了外控电位对Ch-1菌株生长及Cr(Ⅵ)还原的影响.结果表明,电极材料对细菌生长及其活性有一定的影响,不锈钢电极和铂电极体系对细菌生长及活性的影响基本相同,而采用石墨电极细菌的培养效果欠佳.静态培养和动态培养Ch-1菌株时,Cr(Ⅵ)的最终还原率与初始Cr(Ⅵ)浓度无关,24h时Cr(Ⅵ)的还原率均达到了100%;但就还原过程而言,动态培养对Cr(Ⅵ)的还原速率明显优于静态培养,外控电势能够增强或抑制Ch-1菌株的生长及活性,0～-900 mV的负电位可以促进细菌的生长,而400 mV以上的正电势对Ch-1菌株的生长有抑制作用.在-800～ 200 mV的电势范围内,Ch-1菌株还原6价铬的能力得到增强,在此范围外其还原能力受到抑制.     

模拟消落带水华暴发行为的数值沙堆模型

以长江最大支流汉江近年来水华污染的现场资料为例,通过氮磷浓度、水温、流速和光照等实测数据构建了消落带开放水域环境体系的数值沙堆模型,描述了藻类生长及水华暴发的动力学机制;利用数值沙堆系统崩塌行为反映出的频率-尺度幂律关系作为判断消落带水域是否暴发水华以及规模大小的依据,采用有限尺度标度分析从不同侧面验证了水华暴发系统的自组织临界性,并揭示出各种拟合参数与水华暴发规模之间的定量关系.研究表明,沙堆模型如果存在良好的幂律关系,相应的消落带水域将暴发水华,且幂律指数越大,水华污染程度越严重.     

Ni2+对2-氯酚厌氧降解系统的影响

针对重金属对难降解有毒有机物厌氧降解的影响问题,采用间歇试验法研究Ni2 对2-氯酚(2-CP)厌氧降解系统的影响规律.结果表明,当ρ(Ni2 )＜5 mg/L时,Ni2 对2-CP厌氧降解表现出轻度促进,当ρ(Ni2 )为5～500 mg/L,Ni2 以抑制作用为主,抑制作用随ρ(Ni2 )的增加而增强.Ni2 对原基质及关键中间产物苯酚和苯甲酸的抑制程度表现为:苯酚＞苯甲酸＞2-CP;ρ(Ni2 )低时的驯化能有效提高厌氧污泥对Ni2 毒性的耐受性能,300 mg/L Ni2 对2-CP降解的抑制从驯化前的65%降至驯化后的21%.Ni2 对2-CP厌氧降解的抑制作用与污泥中Ni的截留量之间存在正相关关系.抑制浓度CIP值和方程αC=[1-(I/I*)m]/[1 (I/I*)n)]能较好地表征厌氧生物处理过程受抑制程度.     

热解析气相色谱法测定土壤中苯系物

建立了用热解析气相色谱法测定土壤中苯系物的方法.采用保留时间定性,外标法定量.方法检出限分别为:苯1.8 μg·L-1、甲苯3.5 μg·L-1、乙苯7.0 μg·L-1、间二甲苯8.6 μg·L-1、对二甲苯8.6 μg·L-1、邻二甲苯9.8 μg·L-1、苯乙烯10.0 μg·L-1;加标回收率在79%～100%之间,相对标准偏差为1.5%～3.9%.方法操作简便,快速,灵敏度高,能适应现代化的应急监测.     

Membrane fouling control by ultrasound in an anaerobic membrane bioreactor

In this study, ultrasound was used to control the membrane fouling online in an anaerobic membrane bioreactor (AMBR). Short-term running experiments were carried out under different operating conditions to explore feasible ultrasonic parameters. The experimental results indicated that when the crossflow velocity was more than 1.0 m/s, membrane fouling could be controlled effectively only by hydrodynamic methods without ultrasound. When ultrasound was applied, an ultrasonic power range of 60–150 W was suitable for the membrane fouling control in the experimental system. The experimental results showed that the membrane fouling was controlled so well that membrane filtration resistance (ΣR) could stay at 5 × 10¹¹ m⁻¹ for more than a week with the crossflow velocity of 0.75 m/s, which equaled the effect of crossflow velocity of more than 1.0 m/s without ultrasound. Translated from Techniques and Equipment for Environmental Pollution Control, 2006, 7(4): 25–29 [译自: 环境污染治理技术与设备]     

Toxic effects of wastewater from various phases of monosodium glutamate production on seed germination and root elongation of crops

To make a comprehensive assessment on monosodium glutamate (MSG) wastewater pollution, a pollution exposure experiment was carried out on the seed germination and root elongation of wheat, Chinese cabbage and tomato by using the wastewater discharged from different processing phases of MSG production. The results showed that there were significantly positive linear relationships between the inhibitory rates of wheat seed germination and root elongation and the COD_cr of the mother liquor scraps. The toxicity of MSG wastewater to the test crops was in the order of tomato > Chinese cabbage > wheat, indicating that tomato was the most sensitive to the wastewater, and could be considered as an ideal toxic bioindicator. The half-effect concentrations (IC₅₀) based on the seed germination and root elongation of the test crops exposed to the wastewater discharged from various processing phases of MSG production was 22.0–32 432 and 17.3–3320 mg/L, respectively. Translated from Chinese Journal of Applied Ecology, 2006, 17(7): 1286–1290 [译自: 应用生态学报]     

一种超声速气体冲击射流噪声的屏蔽抑制方法

根据对冲击射流离散频率噪声产生的反馈机理的认识，提出了一种能够有效地破坏反馈环的形成，从而抑制冲击射流离散频率噪声的喷嘴屏蔽方法。这种方法是通过阻隔反馈声波使其不能到达喷嘴唇口、同时屏蔽物不与射流接触来实现降噪的目的，实验结果表明，对于合适的屏蔽罩参数，正常降噪效果达5dB以上。分析表明这种降噪方法对射流冲击平板的推力和除尘除水效率的提高有帮助。     

生物硝化池污水中硝化细菌的快速定量研究

实验采用聚合酶链式反应（PCR）技术与最大几率数法（MPN）相结合的MPN－PCR法对生物硝化池污水中的硝化细菌进行快速定量。所用的一对PCR引物是在对硝化细菌的16SrRNA基因进行系统比较的基础上设计合成的，可以扩增出大小为388bp的DNA片段。以从生物硝化池污水中抽提的含硝化细菌DNA的混合DNA为模板，进行PCR扩增并确定合适的扩增条件。运用MPN－PCR法进行定量检测的整个过程可在几小时之内完成。     

冷拉螺旋叶片展开的精确算法

提出了一种新的、更趋精确合理的关于冷拉螺旋叶片坯料的展开与放样计算方法 ,并从实践中探索出叶片在展开与放样时其内径的精确修正系数k之值。     

中国产品生命周期影响评价方法研究

讨论了确定中国产品生命周期影响评价所需的标准化基准和权重的确定方法和程序，包括产品系统环境影响潜值计算，数据标准化，加权评估 以及计算环境影响负荷和资源耗竭系数4个步骤。标准化基准采用1990年中国人均环境影响总潜值来表达，而权重采用1990年的基准与2000年中国政府的削减目标所估算的基准之间的比值计算。