How changing grain size affects the land surface temperature pattern in rapidly urbanizing area: a case study of the central urban districts of Hangzhou City,China

Environmental Science and Pollution Research - Urbanization has led to the rapid and large-scale changes in land use and land cover and has affected the spatial distribution of land surface...     

Polystyrene nanoplastics affect growth and microcystin production of Microcystis aeruginosa

Nanoplastics are widely distributed in freshwater environments, but few studies have addressed their effects on freshwater algae, especially on harmful algae. In this study, the effects of polystyrene (PS) nanoplastics on Microcystis aeruginosa (M. aeruginosa) growth, as well as microcystin (MC) production and release, were investigated over the whole growth period. The results show that PS nanoplastics caused a dose-dependent inhibitory effect on M. aeruginosa growth and a dose-dependent increase in the aggregation rate peaking at 60.16% and 46.34%, respectively, when the PS nanoplastic concentration was 100 mg/L. This caused significant growth of M. aeruginosa with a specific growth rate up to 0.41 d^?1 (50 mg/L PS nanoplastics). After a brief period of rapid growth, the tested algal cells steadily grew. In addition, the increase in PS nanoplastics concentration promoted the production and release of MC. When the PS nanoplastic concentration was 100 mg/L, the content of the intracellular (intra-) and extracellular (extra-) MC increased to 199.1 and 166.5 μg/L, respectively, on day 26, which was 31.4% and 31.1% higher, respectively, than the control. Our results provide insights into the action mechanism of nanoplastics on harmful algae and the potential risks to freshwater environments.

     

Exploring the spatial-temporal variations and policy-based driving force behind groundwater contamination and remediation research in past decades

Environmental Science and Pollution Research - Groundwater has been recognized as one of the most critical and vulnerable natural sources which is utilized in potable water supply, agricultural...     

Urban carbon emission intensity under emission trading system in a developing economy: evidence from 273 Chinese cities

Environmental Science and Pollution Research - The international community has generally recognized the key role of developing countries’ cities in reducing carbon emissions, an elemental way...     

Facile in situ synthesis of silver nanocomposites based on cellulosic paper for photocatalytic applications

Environmental Science and Pollution Research - In this work, various photocatalysts were synthesized with an impregnation-precipitation process to in situ decorate Ag-based nanoparticles (NPs,...     

模拟排水沟渠非点源溶质氮迁移实验研究

农田排水沟渠是由水-底泥-植物组成的复合生态结构,其间非点源溶质的迁移转化对研究沟渠拦截、控制和管理农业非点源污染具有重要意义.本研究以模拟排水沟渠静态实验为基础,以典型非点源溶质氮素为例,分析了实验期内水体、底泥及芦苇不同介质内氮含量变化过程,分析了底泥吸附与解析、芦苇生长与衰败等年内不同时期对水体中氮素浓度的影响,探讨了水-底泥-芦苇复合生态体内氮迁移及对水体中氮浓度的影响机制.结果表明,底泥的吸附与解吸、芦苇生长的吸收和同化对水体中氮素浓度均有影响,10月之前这种影响表现为促使水体中氮素浓度降低,是水体的氮净化过程;10月之后这种净化作用开始降低,11月之后表现为促使水体中氮素浓度升高.同时,模拟沟渠水-底泥-芦苇生态体内氮迁移联系密切,任一介质内或介质间氮素迁移转化都会引起水体中氮素浓度相应调整.     

常规施肥条件下农田不同途径氮素损失的原位研究:以长江中下游地区夏玉米季为例

为了解农田常规施肥条件下的不同途径氮素损失特征,本文通过田间原位试验同步研究了长江中下游地区夏玉米生长季氮肥施用后的农田N2O排放、NH3挥发、氮渗漏和地表径流的变化.结果表明,在复合肥为基肥,尿素为追肥,基追肥氮素水平均为150 kg·hm-2的条件下,整个玉米生长季N2O排放系数为3.3%,NH3挥发损失率为10.2%,氮渗漏和地表径流损失率分别为11.2%和5.1%.此外,基肥施用以氮素渗漏损失为主,而追肥氮素损失以氨挥发和渗漏为主,表明不同途径化肥氮素损失主要受氮肥品种影响,玉米季追肥可改用低氨挥发氮肥品种以减少氮素损失.     

制革废水和印染废水的综合毒性评估及鉴别

研究采用成组生物毒性试验(发光菌急性毒性、斑马鱼幼鱼急性毒性,斑马鱼胚胎发育毒性和小球藻急性毒性),结合理化指标,通过毒性单位、平均毒性(average toxicity,Av Tx)、毒性指数(toxic print,Tx Pr)、最敏感的测试(most sensitive test,MST)和潜在毒性效应指数(potential ecotoxic effects probe,PEEP)对不同工艺阶段印染及制革废水进行毒性削减评估.结果表明PEEP能兼顾废水排放量与毒性效应,更为客观地表征了废水综合毒性,PEEP评价结果显示制革废水和印染废水的毒性削减率分别达到36.8%和23.2%.最后,以发光菌作为受试生物,采用毒性鉴别评估(toxicity identification evaluation,TIE)技术,对印染废水进行毒性鉴别.结果表明,印染废水中主要的致毒物质为非极性有机污染,其次为可滤性化合物,然后是重金属、氧化性物质以及挥发性物质.     

温度对合成钛酸盐纳米材料的影响及其对水中Cd (Ⅱ)的去除效果

为有效去除水中Cd（Ⅱ）,以TiO₂纳米粉和NaOH为原料,调节水热反应温度分别为100、120、150和190℃,制备出了不同形貌的TNs（钛酸盐纳米材料）,分别记为TNs-100、TNs-120、TNs-150和TNs-190,并对其形貌、结构、比表面积、化学组成等物理化学性能进行了表征;通过对水中Cd（Ⅱ）的静态吸附试验,考察了TNs对Cd（Ⅱ）的吸附性能.结果表明:随着合成温度的升高,TNs的形貌逐渐从纳米片演变成纳米管,管长逐渐变长,最后变成纳米棒.TNs-100的晶型结构主要是锐钛矿型;随着温度升高,结晶度逐渐增强;TNs-190出现了部分金红石相.TNs-150对Cd（Ⅱ）的吸附能力最强,最大平衡吸附量为254.66 mg/g,最佳吸附pH为5.0.再生的TNs-150对Cd（Ⅱ）循环吸附6次的去除率和解吸率均可达93%以上.TNs-150对Cd（Ⅱ）的吸附过程符合准二阶动力学方程和Langmuir吸附等温模型,吸附机制主要是TNs层间Na+和H+与溶液中Cd（Ⅱ）的离子交换.研究显示,TNs的饱和吸附量均高于同类吸附剂,能有效去除水中Cd（Ⅱ）.      

夏季太湖CDOM光学特性空间差异及其来源解析

为进一步探究夏季太湖CDOM（有色溶解性有机质）光学特性在空间分布上的差异性与其来源的关系,对其紫外-可见吸收及三维荧光光谱特性进行了分析研究,在此基础上进一步分析了CDOM吸尘系数及其荧光组分（C1、C2、C3、C4）强度和各水质参数间的相关性.结合主成分分析法探讨了CDOM的来源以及与各参数指标[ρ（DOC）除外]之间的来源关系.结果表明:CDOM吸收系数α（355）、S值（光谱斜率）变化范围分别为3.27~8.27 m-1和0.011~0.021 nm-1;太湖西部、北部及南部湖区CDOM丰度较大,S值较低,受陆源输入的影响较为明显.CDOM的三维荧光光谱揭示其中含有两种类蛋白质组分C1和C2以及类腐殖质组分C3和C4,并且以类蛋白质组分为主.此外,大部分采样点的荧光指数（FI）为1.70~2.01,自生源指数（BIX）大于1,腐殖化指数（HIX）小于0.6,r_（T/C）（荧光峰T与荧光峰C荧光强度比值）小于2,表明夏季太湖CDOM内源特性相对强烈.研究显示,除ρ（DOC）外,CDOM与其他水质参数在第一主成分上（贡献率为90.8%）均存在显著相关关系,说明各水质参数的来源存在相似性,并且受生物自生源影响更为显著.