Research on the evolvement of morphology of coking coal during the coking process

The evolvement of morphology and structure of the coal with different metamorphic degrees during coking process in the vertical furnace was investigated by infrared Image detector. Moreover, the temperature distribution in the radial direction and the crack formation were also studied in heating process. The results show that the amount of crack and the shrinkage level of char decrease with the coal rank rising. In addition, the initial temperature of crack formation for char increases with the coal rank rising.     

无锡市大气中类二噁英多氯联苯污染水平

为了了解无锡市大气中类二噁英多氯联苯(Dioxin-like PCBs,DL-PCBs)水平,利用大流量空气采样器在无锡市分别采集了6个气相和6个颗粒相大气样品,气相色谱-质谱(GC-NCI-MS)测定样品中12种类二噁英多氯联苯。结果显示,大气样品中∑_(12)DL-PCBs的总浓度(气相+颗粒相)为1157～2 747 fg/m³,平均浓度为1759 fg/m3,平均浓度为1759 fg/m³。其中,气相的浓度为11 124～2 721 fg/m3。其中,气相的浓度为11 124～2 721 fg/m³,平均值为1 701fg/m3,平均值为1 701fg/m³;颗粒相的浓度为26～143 fg/m3;颗粒相的浓度为26～143 fg/m³,平均值为58fg/m3,平均值为58fg/m³。气相中∑_(12)DL-PCB含量占总量的97%,而颗粒相仅占3%。DL-PCBs的总毒性当量(气相+颗粒相)为2.16～4.47fg TEQ/m3。气相中∑_(12)DL-PCB含量占总量的97%,而颗粒相仅占3%。DL-PCBs的总毒性当量(气相+颗粒相)为2.16～4.47fg TEQ/m³,平均值为3.53fg TEQ/m3,平均值为3.53fg TEQ/m³。DL-PCBs单体中PCB-118的浓度最高,平均占总浓度的54%,其次是PCB-105和PCB-77,PCB+81在所有样品中均未检出。在所有DL-PCBs中,毒性当量浓度的主要贡献者为PCB-126,其平均贡献率为95%,其次为PCB-169,平均贡献率为3%。     

铬(Ⅵ)土著还原菌筛选及初步鉴定实验研究

以重铬酸钾为供试物,用固体平板法和还原实验对铬(Ⅵ)土著还原菌进行筛选,用载片培养法、革兰氏染色法、鞭毛染色法、芽孢染色法对还原菌做初步的鉴定,共筛选出16株铬(Ⅵ)土著还原菌,并挑选出还原率相对较高的Z2(35.2%)、Z3(45.2%)、Z4(38.6%)、X8(30.4%)、X10(29.4%)作为铬(Ⅵ)的优势还原菌株。经初步鉴定,土著真菌Z2为黑曲霉(Aspergillusniger),Z3、Z4为镰刀菌属(Fusariumsp.),土著细菌X8、X10为芽孢杆菌(Bacillussp.)。实验的方法和成果将为铬(Ⅵ)污染土壤微生物治理技术的推广应用提供技术支持。     

昆明市主城区三种温室气体的月份和干、湿季的小时变化规律及原因分析

研究了昆明市主城区3种温室气体浓度的最新变化情况,采用2009年、2010年和2011年的月份和小时平均浓度数据,结合昆明市气候特点,对3种温室气体浓度的月份和干、湿季的小时变化规律及原因进行了分析。     

生活垃圾中废塑料分选回收技术概述

近年来,废塑料在城市生活垃圾中占有相当大的比例,其含量正呈逐年上涨的趋势,因此对塑料进行分选和资源化利用势在必行。塑料分选技术是摆在我们中间的一项难题,目前生活垃圾废塑料的分选技术五花八门．由于在全国各地废塑料在垃圾中的还水量等因素的影响,现实中能实现废塑料的分选还不成熟。因此,研究一套适合废塑料的分选技术迫在眉睫。     

采掘业井工开采项目地下水环境影响评价相关问题探讨-以凯达煤矿项目为例

本文针对采掘业并工开采项目地下水环境影响评价的特点,根据在环境影响评价工作中的实践经验,以位于内蒙古自治区鄂尔多斯市准格尔旗境内的凯达煤矿为例,就地下水导水裂隙带、地下水影响范围、含水层、居民水井等问题具体分析、并结合产生的影响提出具体的防治措施.     

火电厂除尘器性能比较及应用分析

介绍了火电厂除尘器应用现状,论述了电除尘器、袋式除尘器和电袋复合式除尘器的原理及特点,分析了电除尘器和袋式除尘器存在的问题,强调了根据火电厂情况合理选择除尘器类型.     

烟气黑度的产生及处理方法

本文从原料、生产工艺、处理设备、企业管理等方面论述了烟气黑度超标的相关原因,针对具体情况提出了有针对性的解决方案,改进生产工艺、加强人员管理和设备投入等防治烟气黑度超标现象。     

GC/MS和GC/AED联用技术分析氯代邻羟基二苯醚类化合物的探讨

本文针对三氯新在脱氯反应过程中会产生多种二苯醚类化合物,提出采用GC/MS与GC-AED联用技术,对所有过程产物做出定性或定量分析,并通过实验证明其可行性.     

Insertable thin film thermocouples for in situ transient temperature monitoring in ultrasonic metal welding of battery tabs

Real-time monitoring and control of temperature in ultrasonic joining of battery tabs and coupons are important for the quality improvement and cost reduction of battery assembly. However, there have always been difficulties in accurate and real-time measurement of temperature by conventional sensors for practical implementation. In this study, an innovative method is developed to provide an enabling technology for the in situ transient temperature monitoring, which could provide reliable feedback signals for potential control of ultrasonic joining processes. Micro thin film thermocouples (TFTCs) were fabricated on thin silicon substrates, which were then inserted in the welding anvil as a permanent feature so that the sensors were always located about 100 μm directly under the welding spot during joining of multilayer Ni-coated Cu thin sheets for battery assembly. Good repeatability was demonstrated while a temperature rise of up to 650 °C was obtained due to the closeness of the sensors to the welding spot. The inserts with thin film sensors remained functional after welding experiments. This method has a great potential for in situ transient temperature monitoring, and thus the control of ultrasonic joining processes to realize a practical smart joining system.