Contents and origin of polychlorinated diphenyl ethers (PCDE) in salmon from the Baltic Sea, Lake Saimaa and the Tenojoki river in Finland

The presence of 26 congeners of polychlorinated diphenyl ethers (PCDEs) was investigated in salmon from three locations in Finland. In addition to salmon, one chlorophenol wood preservative (Ky-5) and one fly ash sample were analyzed for PCDEs. Concentrations of PCDE congeners in salmon muscle measured by high resolution gas chromatography/low resolution mass spectrometry ranged from < 0.02 to 2.4 ng/g fresh weight. The major components of tetra- to octachlorinated PCDEs in salmon were one TeCDE (22′44′-), two PeCDEs (22′44′5- and 23′44′5-) and three HxCDEs (22′44′56′-, 22′44′55′- and 22′344′5-). The Baltic salmon caught from the Simojoki River had higher levels of PCDEs than the Atlantic salmon from the Tenojoki River or salmon from Lake Saimaa in South-Finland. Same PCDE congeners which were abundant in the wood preservative were also detected in salmon, whereas PCDE congeners in the fly ash were different from those in salmon or in Ky-5.     

Isolation and identification of intermediates from biodegradation of low chlorinated biphenyls (Delor-103)

Microorganism Pseudomonas species P2 metabolizes polychlorinated biphenyls (PCBs) and biphenyl, producing the whole spectrum of intermediates, among them coloured intermediates, which are suitable for the monitoring of PCBs degradation by optical sensors. Knowledge of chemical structures and conditions of development of colour metabolites is necessary for application of optical analytical methods. The main goal of this work was the isolation and identification of intermediates from the biodegradation of the mixture of low chlorinated biphenyls (Delor-103), which is based on the solid phase extraction (SPE) of the whole mixture using LiChrolut EN cartridges, then silylation of the extract as one way to the identification of one part of intermediates by GC-MS, and acetylation of the extract as a way for the further concentration and analysis of more polar chlorobiphenylols and chlorobiphenyldiols. The combination of SPE and following acetylation allows to obtain chlorobiphenylols and chlorobiphenyldiols as an almost pure fraction. The acetylation method could be also used instead SPE procedure with the same final concentration effect. Using the simulation mass spectrometry program, two new compounds, dihydrodihydroxytrichloro- and tetrahydrodihydroxytrichlorobiphenyl, as silylderivatives, were identified.     

Fate of pulp mill effluent compounds in a finnish watercourse

Chloroorganic chemicals emitted from the pulp and paper mill at nekoski in central Finland were monitored for several years. Concentration time series are used for evaluating the environmental fate and the applicability and validity of an exposure models. Fitted elimination rates of 3,4,5-Tri-, 4,5,6-Tri-, Tetrachloroguaiacol and 2,4,6-Trichlorophenol are approx. 0.22 d^-1, or rather the half-lives are approx. 3 days. The elimination is most likely by biodegradation and transport-controlled. For 2,3,6-trichloro-p-cymene, fate simulations indicate significant volatilization and sedimentation. Good agreement is achieved with a one-dimensional steady-state box model, except for concentrations in fish. For a reliable assessment of environmental damage, laboratory experiments, monitoring and simulations need to be in tune.     

Environmental toxins in Finnish Wildlife. A study on time trends of residue contents in fish during 1973–1978

The O.E.C.D. monitoring Wildlife Sampling and Analysis Programme 1973–1975 has been extended at national level in Finland to 1978 by analysing chlorinated hydrocarbon residues in fish at two marine and two freshwater environments and mercury at the latter two freshwater environments. Statistical treatment of the analysis results gave significant decreasing trends in most cases of PCB and DDT residues but in mercury levels no significant change was detected.     

Screening of halogenated aromatic compounds in some raw material lots for an aluminium recycling plant

Four samples of scrap raw materials for an aluminium recycling plant were screened for the occurrence of persistent halogenated aromatic compounds. The samples contained waste from handling of electric and electronic plastics, filter dust from electronic crusher, cyclone dust from electronic crusher and light fluff from car shredder. In our screening analyses, brominated flame retardants were observed in all samples. Polybrominated diphenyl ethers (PBDE) were identified in all samples in amounts of 245-67450 ng/g. The major PBDE congeners found were decabromo- and pentabromodiphenyl ethers. 1,1-bis(2,4,6-tribromophenoxy)ethane, hexabromobenzene, ethyl-pentabromobenzene, tetrabromobisphenol-A, pentabromotoluene and dimethyl tetrabromobenzene were observed in all scrap samples. The concentrations of PCBs, PCNs (polychlorinated naphthalenes) and nona- to undecachlorinated terphenyls in some of these scrap samples were remarkably high.     

Trends of organochlorine compounds in Finnish inland waters

Caged common lake mussels (Anodonta piscinalis) have been used in the monitoring of organochlorine compounds in pulp and paper mill recipient watercourses of Finland annually from 1984 to 1998. Statistically significant decreasing trends of chlorophenols and chloroguaiacols originating from chlorobleaching were observed in all recipients in parallel with the decreasing discharges from the mills. Metabolites of chlorophenols, chloroanisoles and chloroveratroles had no or slightly increasing trends. Elevated PCB concentrations were measured in four watercourses. In two areas, PCBs were found to be significantly increasing, in two other cases they showed no trend. A mill producing recycled paper was apparently responsible for an increase of PCBs and DDE in recipient watercourses. Overall decreases were observed for other chlorohydrocarbons except for DDT. Material flows of chlorohydrocarbons were positively correlated with waterflows (Q) in some cases.     

Optimisation of chemical purification conditions for direct application of solid metal salt coagulants: Treatment of peatland-derived diffuse runoff

The drainage of peatland areas for peat extraction,agriculture or bioenergy requires affordable,simple and reliable treatment methods that can purify waters rich in particulates and dissolved organic carbon.This work focused on the optimisation of chemical purification process for the direct dosage of solid metal salt coagulants.It investigated process requirements of solid coagulants and the influence of water quality,temperature and process parameters on their performance.This is the first attempt to provide information on specific process requirements of solid coagulants.Three solid inorganic coagulants were evaluated:aluminium sulphate,ferric sulphate and ferric aluminium sulphate.Pre-dissolved aluminium and ferric sulphate were also tested with the objective of identifying the effects of in-line coagulant dissolution on purification performance.It was determined that the pre-dissolution of the coagulants had a significant effect on coagulant performance and process requirements.Highest purification levels achieved by solid coagulants,even at 30% higher dosages,were generally lower(5%-30%) than those achieved by pre-dissolved coagulants.Furthermore,the mixing requirements of coagulants pre-dissolved prior to addition differed substantially from those of solid coagulants.The pH of the water samples being purified had a major influence on coagulant dosage and purification efficiency.Ferric sulphate(70 mg/L) was found to be the best performing solid coagulant achieving the following load removals:suspended solids(59%-88%),total organic carbon(56%-62%),total phosphorus(87%-90%),phosphate phosphorus(85%-92%) and total nitrogen(33%-44%).The results show that the use of solid coagulants is a viable option for the treatment of peatland-derived runoff water if solid coagulant-specific process requirements,such as mixing and settling time,are considered.     

Organic chlorine compounds in lake sediments. III. Chlorohydrocarbons, free and chemically bound chlorophenols

Chlorohydrocarbons and free and chemically bound chlorophenols, catechols and guaiacols were measured from lake sediments in Central Finland. Chlorohydrocarbons occurred at low backround levels except chlorocymenes from pulp mills and PCBs near the city of Äänekoski, where a local leakage occurrs. Free chlorophenols (hexane extractables) were found in all 18 areas studied, but the bound ones (extracted with strong alkali) only in the pulp mill reciepient lakes where they dominated. Preliminary analyses of chemically bound chlorophenols in high molecular fractions of spent bleach liquors and pulp mill effluents indicated that majority of chlorocatechols and guaiacols are bound already in the factory.