Observations of particle growth at a remote,Arctic site

Observations of particle size distributions suggest that particles grow significantly just above the snow surface at a remote, Arctic site. Measurements were made at Summit, Greenland (71.38°N and 31.98°W) at approximately 3200 m above sea level. No new particle formation was observed locally, but growth of ultrafine particles was identified by continuous evolution of the geometric mean diameter (GMD) during four events. The duration of the growth during events was between 24 and 115 h, and calculated event-average growth rates (GR) were 0.09, 0.30, 0.27, and 0.18 nm h^?1 during each event, respectively. Four-hour GR up to 0.96 nm h^?1 were observed. Events occurred during below- and above-average temperatures and were independent of wind direction. Correlation analysis of hourly-calculated GR suggested that particle growth was limited by the availability of photochemically produced precursor gases. Sulfuric acid played a very minor role in particle growth, which was likely dominated by condensation of organic compounds, the source of which was presumably the snow surface. The role of boundary layer dynamics is not definite, although some mixing at the surface is necessary for the observation of particle growth. Due to the potentially large geographic extent of events, observations described here may provide a link between long-range transport of mid-latitude pollutants and climate regulation in the remote Arctic.     

Sources,distribution, and acidity of sulfate–ammonium aerosol in the Arctic in winter–spring

We use GEOS-Chem chemical transport model simulations of sulfate–ammonium aerosol data from the NASA ARCTAS and NOAA ARCPAC aircraft campaigns in the North American Arctic in April 2008, together with longer-term data from surface sites, to better understand aerosol sources in the Arctic in winter–spring and the implications for aerosol acidity. Arctic pollution is dominated by transport from mid-latitudes, and we test the relevant ammonia and sulfur dioxide emission inventories in the model by comparison with wet deposition flux data over the source continents. We find that a complicated mix of natural and anthropogenic sources with different vertical signatures is responsible for sulfate concentrations in the Arctic. East Asian pollution influence is weak in winter but becomes important in spring through transport in the free troposphere. European influence is important at all altitudes but never dominant. West Asia (non-Arctic Russia and Kazakhstan) is the largest contributor to Arctic sulfate in surface air in winter, reflecting a southward extension of the Arctic front over that region. Ammonium in Arctic spring mostly originates from anthropogenic sources in East Asia and Europe, with added contribution from boreal fires, resulting in a more neutralized aerosol in the free troposphere than at the surface. The ARCTAS and ARCPAC data indicate a median aerosol neutralization fraction [NH₄⁺]/(2[SO₄^2?] + [NO₃^?]) of 0.5 mol mol^?1 below 2 km and 0.7 mol mol^?1 above. We find that East Asian and European aerosol transported to the Arctic is mostly neutralized, whereas West Asian and North American aerosol is highly acidic. Growth of sulfur emissions in West Asia may be responsible for the observed increase in aerosol acidity at Barrow over the past decade. As global sulfur emissions decline over the next decades, increasing aerosol neutralization in the Arctic is expected, potentially accelerating Arctic warming through indirect radiative forcing and feedbacks.     

Leaf-cutter ants with worn mandibles cut half as fast,spend twice the energy,and tend to carry instead of cut

The importance of mechanical wear in the behavioral ecology and energetics of small organisms is an open question. We investigated wear in leaf-cutter ants, Atta cephalotes, because their cutting technique can be imitated and the leaves are the main energy source for the colony. We found that a razor-sharp (50-nm radius) “V-blade” that cuts leaves between the first and second mandibular teeth was dulled (∼10-μm radius) and often nearly worn away on foragers. We found that the force required to cut standard leaves, using mandibles removed from foragers cutting in the wild, varied by a factor of 2.5 with tooth wear, defined as the difference between pupal and actual tooth length. We also found that wear significantly reduced the cutting rate. From the distribution of wear among the cutting foragers, we estimated that the wild colony would have spent 44% less of both energy and time making the observed cuts if the cutters’ mandibles had all been pristine. Finally, wear correlated with behavioral differences—foragers with the most worn 10% of mandibles almost exclusively carried rather than cut. This previously unreported form of task partitioning suggests that eusociality may extend useful lifespans by making it possible to switch tasks as skills decline. We developed a model, assuming that ants do work at a constant rate proportional to their mass, to predict the cutting rate from head width, tooth wear, and force to cut leaves with a scalpel (R = 0.62), and we used this estimate to argue that the partitioning of cutting and carrying was sub-optimal but better than random. Wear’s strong effect on performance may promote wear-avoiding behavior and wear-resistant mandible composition; it may affect leaf selection and worker lifespan and it raises the possibility that wear is a similarly important constraint for many other small organisms.     

Portable ladder assessment tool development and validation – Quantifying best practices in the field

Many causes for falls from ladders in construction are related to the user’s activities; however, the extent to which users comply with ladder use best practices is unknown and has not been well quantified before. We developed and tested an audit tool that assesses compliance with best practices guidelines for portable-ladder-use designed for applications in the construction industry. Implemented on a hand-held computer, the assessment tool consisted of a series of check-lists categorized in four groups; ladder condition, setup, moving on a ladder, and completing tasks from a ladder. For these four observational categories, the resulting tool contained 31 and 33 questions for step and extension ladders, respectively. Three individuals trained to use the tool scored a set of photographs and videos depicting 25 ladder conditions, 20 ladder setups, 10 users moving on ladders, and 13 users completing tasks from a ladder for a total of 78 observations. The assessment tool had good agreement across and within raters. For the three raters, agreement ranged from 79% to 97% across the questions. Within one subject, kappa coefficients for the intra-rater reliability ranged from 0.67 to 0.91. The tool offers a practical method to quantify best practices associated with ladder use that can ultimately inform targeted intervention efforts.     

RECYCLING INPUT DATA DURING ANALYTIC ELEMENT MODELING NEAR INDIANAPOLIS,INDIANA1

ABSTRACT: Overlapping and adjacent ground water investigations are common in areas where aquifers are threatened by industrial development. In the Indianapolis area in Marion County, Indiana, a patchwork of ground water flow models have been used during the past 20 years to evaluate ground water resources and to determine the effects of local contamination. In every case these ground water models were constructed from scratch. Site specific finite difference grids or finite element meshes inhibit the direct reuse of input data when the area of interest shifts. Because the aquifer is not discretized into a grid or mesh with analytic element models, there are unique opportunities for direct reuse of model input data. In two applications of this principle we illustrate how the newly emerging analytic element method allows a fairly straightforward reuse of model input data from previous models in the same general area. In analytic element models of Central Indiana, streams and their tributaries are represented in different resolutions. Input data items of several modeling studies are stored and cataloged on disk in such a manner that they can be selectively retrieved by a data management program PREPRO. In this manner, a new ground water model can be set up quickly with input data which have been previously defined and tested during model calibration.     

First-trimester maternal serum alpha-fetoprotein and human chorionic gonadotropin screening for chromosome defects

The aim of this study was to determine the efficacy of combined maternal serum alpha-fetoprotein (MSAFP) and maternal serum human chorionic gonadotropin (MShCG) screening in detecting chromosome defects in the first trimester of pregnancy. Sera of 492 women (previously assayed for MSAFP) were analysed for MShCG under code without knowledge of cytogenetic results. Overall, 48 of 492 patients (9·8 per cent) had either an MSAFP multiple of the median ⩽0·5 or an MShCG β/a z ratio multiple of the median ⩽ 0·25, eight of whom had a fetus with a serious chromosome defect. A third of fetuses with Down' s syndrome and 83 per cent with trisomy 18 were detected at a potential‘cost’ of providing chorionic villus sampling or amniocentesis in 8·6 percent of women screened.     

Signaling effort does not predict aggressiveness in male spring field crickets

The relationship between signaling and aggression is still unclear despite several decades of research. However, there is a growing interest in studying signals that predict aggressive behavior or fighting ability. The goals of our study were threefold: we investigated the relationship between signaling effort and aggression, the relationship between body condition and aggression, and the effect of fighting experience on subsequent signaling behavior in wild-caught and laboratory-reared male spring field crickets (Gryllus veletis). We found that aggressive behavior was not related to signaling effort, body size, or body condition. For contest winners, wild-captured males were more aggressive than laboratory-reared males. Signaling effort was highly repeatable within individuals, but aggressive behavior had low repeatability. We found no evidence for a winner or loser effect on signaling; there was no change in signaling effort when we compared contest winners and losers before and after they participated in aggressive contests. Long-distance acoustic signaling and aggressive behavior appear to be independent of one another in spring field crickets, perhaps serving different functions in female attraction and male–male competition, respectively.     

Cumulative and Residual Effects of Repeated Sewage Sludge Applications: Forage Productivity and Soil Quality Implications in South Florida,USA (9 pp)

Background, Aim and Scope The cow-calf (Bos taurus) industry in subtropical United States and other parts of the world depends almost totally on grazed pastures. Establishment of complete, uniform stand of bahiagrass (BG) in a short time period is important economically. Failure to obtain a good BG stand early means increased encroachment of weeds and the loss of not only the initial investment costs, but production and its cash value. Forage production often requires significant inputs of lime, N fertilizer, and less frequently of P and K fertilizers. Domestic sewage sludge or biosolids, composted urban plant debris, waste lime, phosphogypsum, and dredged materials are examples of materials that can be used for fertilizing and liming pastures. Perennial grass can be a good choice for repeated applications of sewage sludge. Although sewage sludge supply some essential plant nutrients and provide soil property-enhancing organic matter, land-application programs still generate some concerns because of possible health and environmental risks involved. The objectives of this study were to evaluate the cumulative and residual effects of repeated applications of sewage sludge on (i) bahiagrass (BG, Paspalum notatum Flügge) production over years with (1997–2000) and without (2001–2002) sewage sludge applications during a 5-yr period, and (ii) on nutrients status of soil that received annual application of sewage sludge from 1997 to 2000 compared with test values of soils in 2002 (with no sewage sludge application) in South Florida.Methods The field experiment was conducted at the University of Florida Agricultural Research and Education Center, Ona, FL (27o26’N, 82o55’W) on a Pomona fine sandy soil. With the exception of the control, BG plots received annual sewage sludge and chemical fertilizers applications to supply 90 or 180 kg total N ha–1 yr–1 from 1997 to 2000. Land application of sewage sludge and fertilizer ceased in 2001 season. In early April 1998, 1999, and 2000, plots were mowed to 5-cm stubble and treated with the respective N source amendments. The experimental design was three randomized complete blocks with nine N-source treatments: ammonium nitrate (AMN), slurry biosolids of pH 7 (SBS7), slurry biosolids of pH 11 (SBS11), lime-stabilized cake biosolids (CBS), each applied to supply 90 or 180 kg N ha–1, and a nonfertilized control (Control). Application rates of sewage sludge were calculated based on the concentration of total solids in materials as determined by the American Public Health Association SM 2540G method and N in solids. The actual amount of sewage sludge applications was based on the amount required to supply 90 and 180 kg N ha–1. Sewage sludge materials were weighed in buckets and uniformly applied to respective BG plots. Soil samples were collected in June 1997, June 1999, and in June 2002 from 27 treatment plots. In 1997 and 1999, soil samples were collected using a steel bucket type auger from the 0- to 20-, 20- to 40-, 40- to 60-, and 60- to 100-cm soil depths. Forage was harvested on 139, 203, 257, and 307 day of year (DOY) in 1998; 125, 202, 257, and 286 DOY in 1999; 179, 209, 270, and 301 DOY in 2000; and on 156 and 230 DOY in 2002 (no sewage sludge applications) to determine the residual effect of applied sewage sludge following repeated application. Forage yield and soils data were analyzed using analysis of variance (PROC ANOVA) procedures with year and treatment as the main plot and sub-plot, respectively. As a result of significant year effects on forage yield, data were reanalyzed annually (i.e., 1998, 1999, 2000, and 2002).Results and Discussion All sewage sludges used in this study were of class B in terms of USEPA’s pathogens and pollutant concentration limit. Pathogen and chemical composition of the class B sewage sludge that were used in the study were all in compliance with the USEPA guidelines. The liquid sludge (SBS11) had the lowest fecal coliform counts (0.2 x 106 CFU kg–1) while the cake sewage sludge (CBS) had the greatest coliform counts of 178 x 106 CFU kg–1. The fecal coliform counts for SBS7 was about 33 x 106 CFU kg–1. Average soil test values in June 2002 exhibited: i) decrease in TIN (NO3-N + NH4-N), TP, K, Ca, Mg, Mn, and Fe; and ii) slight increase in Zn and Cu when compared with the June 1997 soil test results. The overall decrease in soil test values in 2002 might be associated with nutrient cycling and plant consumption. Although the average BG forage yield in 2002 (2.3 ± 0.7 Mg ha–1) was slightly lower than in 2000 (3.5 ± 1.2 Mg ha–1), yield differences in 2002 between the control (1.2 + 0.2 Mg ha–1) and treated plots (2.3 ± 0.5 Mg ha–1 to 3.3 ± 0.6 Mg ha–1) were indicative of a positive residual effect of applied sewage sludge. This study has shown that excessive build up of plant nutrients may not occur in beef cattle pastures that repeatedly received sewage sludge while favoring long-term increased forage yield of BG. All sources of N (sewage sludge and AMN) gave better forage production than the unfertilized control during years with sewage sludge application (1997–2000) and also during years with no sewage sludge application (2001–2002). The favorable residual effects of applied sewage sludge in 2002 may have had received additional boost from the amount of rainfall in the area.Conclusions Repeated applications of sewage sludge indicate no harmful effects on soil quality and forage quality. Our results support our hypothesis that repeated land application of sewage sludge to supply 90 and 180 kg N ha–1 would not increase soil sorption for nutrients and trace metals. Results have indicated that the concentrations of soil TIN and TP declined by almost 50% in plots with different nitrogen sources from June 1997 to June 2002 suggesting that enrichment of nitrogen and phosphorus is insignificant. The concentrations of soil nitrogen and phosphorus in 2002 following repeated application of sewage sludge were far below the contamination risk in the environment. The residual effect of these sewage sludge over the long term can be especially significant in many areas of Florida where only 50% of the 1 million ha of BG pastures are given inorganic nitrogen yearly.Recommendation and Outlook Successive land application of sewage sludge for at least three years followed by no sewage sludge application for at least two years may well be a good practice economically because it will boost and/or maintain sustainable forage productivity and at the same time minimize probable accumulation of nutrients, especially trace metals. Consecutive applications of sewage sludge may result in build up of some trace metals in some other states with initial high metallic content, but in this study, no detrimental effects on soil chemical properties were detected. The possibilities for economically sound application strategies are encouraging, but more and additional research is required to find optimal timing and rates that minimizes negative impacts on soil quality in particular or the environment in general. For proper utilization of sewage sludge, knowledge of the sewage sludges’ composition, the crop receiving it, are absolutely crucial, so that satisfactory types and rates are applied in an environmentally safe manner. There is still much to be learned from this study and this investigation needs to continue to determine whether the agricultural and ecological objectives are satisfied over the longer term.     

Control strategies for particulate emissions from vehicular diesel exhaust

The advantages and disadvantages of several possible control strategies for particulate emissions from vehicular diesel exhaust are discussed. The evaluation of the potential usefulness of the various control strategies is based on available data concerning the mass loading and particle size distribution and on anticipated control standards. Several studies have been made on devices for removing particulate emissions from vehicular diesel exhaust. These studies, which include the techniques of filtration, wet scrubbers, and electrostatic precipitation, are summarized. A comparison of the various control devices is made based on such factors as size, efficiency, and maintenance requirements.     

A global health problem caused by arsenic from natural sources

Arsenic is a carcinogen to both humans and animals. Arsenicals have been associated with cancers of the skin, lung, and bladder. Clinical manifestations of chronic arsenic poisoning include non-cancer end point of hyper- and hypo-pigmentation, keratosis, hypertension, cardiovascular diseases and diabetes. Epidemiological evidence indicates that arsenic concentration exceeding 50 microg l(-1) in the drinking water is not public health protective. The current WHO recommended guideline value for arsenic in drinking water is 10 microg l(-1), whereas many developing countries are still having a value of 50 microg l(-1). It has been estimated that tens of millions of people are at risk exposing to excessive levels of arsenic from both contaminated water and arsenic-bearing coal from natural sources. The global health implication and possible intervention strategies were also discussed in this review article.