Source-to-receptor pathways of anthropogenic PM2.5 in Detroit,Michigan: Comparison of two inhalation exposure studies

Recent studies have attributed toxic effects of ambient fine particulate matter (aerodynamic diameter ≤ 2.5 μm; PM_2.5) to physical and/or chemical properties rather than total mass. However, identifying specific components or sources of a complex mixture of ambient PM_2.5 that are responsible for adverse health effects is still challenging. In order to improve our understanding of source-to-receptor pathways for ambient PM_2.5 (links between sources of ambient PM_2.5 and measures of biologically relevant dose), integrated inhalation toxicology studies using animal models and concentrated air particles (CAPs) were completed in southwest Detroit, a community where the pediatric asthma rate is more than twice the national average. Ambient PM_2.5 was concentrated with a Harvard fine particle concentrator housed in AirCARE1, a mobile air research laboratory which facilitates inhalation exposure studies in real-world settings. Detailed characterizations of ambient PM_2.5 and CAPs, identification of major emission sources of PM_2.5, and quantification of trace elements in the lung tissues of laboratory rats that were exposed to CAPs for two distinct 3-day exposure periods were completed.This paper describes the physical/chemical properties and sources of PM_2.5, pulmonary metal concentrations and meteorology from two different 3-day exposure periods—both conducted at the southwest Detroit location in July 2003—which resulted in disparate biological effects. More specifically, during one of the exposure periods, ambient PM_2.5-derived trace metals were recovered from lung tissues of CAPs-exposed animals, and these metals were linked to local combustion point sources in southwest Detroit via receptor modeling and meteorology; whereas in the other exposure period, no such trace metals were observed. By comparing these two disparate results, this investigation was able to define possible links between PM_2.5 emitted from refineries and incinerators and biologically relevant dose, which in turn may be associated with observed health effects.     

Product quality-based eco-efficiency applied to digital cameras

When calculating eco-efficiency, there are considerable confusion and controversy about what the product value is and how it should be quantified. We have proposed here a quantification method for eco-efficiency that derives the ratio of the multiplication value of the product quality and the life span of a product to its whole environmental impact based on Life Cycle Assessment (LCA). In this study, product quality was used as the product value and quantified by the following three steps: (1) normalization based on a value function, (2) determination of the subjective weighting factors of the attributes, and (3) calculation of product quality of the chosen products. The applicability of the proposed method to an actual product was evaluated using digital cameras. The results show that the eco-efficiency values of products equipped with rechargeable batteries were higher than those products that use alkaline batteries, because of higher quality values and lower environmental impacts. The sensitivity analysis shows that the proposed method was superior to the existing methods, because it enables to identify the quality level of the chosen products by considering all products that have the same functions in the market and because, when adding a new product, the calculated quality values in the proposed method do not have to be changed.     

Consumer-resource body-size relationships in natural food webs

It has been suggested that differences in body size between consumer and resource species may have important implications for interaction strengths, population dynamics, and eventually food web structure, function, and evolution. Still, the general distribution of consumer-'resource body-size ratios in real ecosystems, and whether they vary systematically among habitats or broad taxonomic groups, is poorly understood. Using a unique global database on consumer and resource body sizes, we show that the mean body-size ratios of aquatic herbivorous and detritivorous consumers are several orders of magnitude larger than those of carnivorous predators. Carnivorous predator-prey body-size ratios vary across different habitats and predator and prey types (invertebrates, ectotherm, and endotherm vertebrates). Predator-prey body-size ratios are on average significantly higher (1) in freshwater habitats than in marine or terrestrial habitats, (2) for vertebrate than for invertebrate predators, and (3) for invertebrate than for ectotherm vertebrate prey. If recent studies that relate body-size ratios to interaction strengths are general, our results suggest that mean consumer-resource interaction strengths may vary systematically across different habitat categories and consumer types.     

Comparison of fenton and photo-fenton processes for livestock wastewater treatment

In this study, the photochemical degradation of livestock wastewater was carried out by the Fenton and Photo-Fenton processes. The effects of pH, reaction time, the molar ratio of Fe(2 +)/H(2)O(2), and the Fe(2 +) dose were studied. The optimal conditions for the Fenton and Photo-Fenton processes were found to be at a pH of 4 and 5, an Fe(2 +) dose of 0.066 M and 0.01 M, a concentration of hydrogen peroxide of 0.2 M and 0.1 M, and a molar ratio (Fe(2 +)/H(2)O(2)) of 0.33 and 0.1, respectively. The optimal reaction times in the Fenton and Photo-Fenton processes were 60 min and 80 min, respectively. Under the optimal conditions of the Fenton and Photo-Fenton processes, the chemical oxygen demand (COD), color, and fecal coliform removal efficiencies were approximately 70--79, 70--85 and 96.0--99.4%, respectively.     

Perchlorate in fish from a contaminated site in east-central Texas

Perchlorate, a known thyroid endocrine disruptor, contaminates surface waters near military instillations where solid fuel rocket motors are manufactured or assembled. To assess potential perchlorate exposure to fish and the human population which may feed on them, fish were collected around the Naval Weapons Industrial Reserve Plant in McLennan County, TX, and analyzed for the presence of the perchlorate anion. The sampling sites included Lake Waco and Belton Lake, and several streams and rivers within their watersheds. The general tendency was that perchlorate was only found in a few species sampled, and perchlorate was not detected in every individual within these species. When detected in the fish, perchlorate tissue concentrations were greater than that in the water. This may be due to highly variable perchlorate concentrations in the water coupled with individual-level variation in elimination from the body, or to routes of exposure other than water.     

Applications of Satellite Remote Sensing to Marine Pollution Studies

There are two approaches in the application of satellite sensors to marine pollution studies. Satellite sensors are used to observe and characterize ocean pollutants such as industrial wastes and oil. in addition, satellite observations provide information useful in illuminating processes such as eutrophi-cation or air-sea exchange of CO₂, that are important in determining the distribution and fate of pollutants.

Satellite technology is an important tool in monitoring and studying ocean pollution. Visible sensors have been used to observe and characterize sewage sludge and industrial wastes dumped at sea. Oil slicks have been observed with Landsat, AVHRR and SAR imagery. Besides directly detecting pollutants, satellite sensors are useful for analyzing ocean processes that are influential in the fate of pollutants. These processes include eutrophication of coastal waters and the distribution of suspended matter. the fate of excess CO₂ can be addressed using scatterometer-derived estimates of wind speeds to determine the CO₂ exchange coefficient at the sea surface on a global scale.     

Simulating urban-scale air pollutants and their predicting capabilities over the Seoul metropolitan area

Urban-scale air pollutants for sulfur dioxide, nitrogen dioxide, particulate matter with aerodynamic diameter > or = 10 microm, and ozone (O3) were simulated over the Seoul metropolitan area, Korea, during the period of July 2-11, 2002, and their predicting capabilities were discussed. The Air Pollution Model (TAPM) and the highly disaggregated anthropogenic and the biogenic gridded emissions (1 km x 1 km) recently prepared by the Korean Ministry of Environment were applied. Wind fields with observational nudging in the prognostic meteorological model TAPM are optionally adopted to comparatively examine the meteorological impact on the prediction capabilities of urban-scale air pollutants. The result shows that the simulated concentrations of secondary air pollutant largely agree with observed levels with an index of agreement (IOA) of >0.6, whereas IOAs of approximately 0.4 are found for most primary pollutants in the major cities, reflecting the quality of emission data in the urban area. The observationally nudged wind fields with higher IOAs have little effect on the prediction for both primary and secondary air pollutants, implying that the detailed wind field does not consistently improve the urban air pollution model performance if emissions are not well specified. However, the robust highest concentrations are better described toward observations by imposing observational nudging, suggesting the importance of wind fields for the predictions of extreme concentrations such as robust highest concentrations, maximum levels, and >90th percentiles of concentrations for both primary and secondary urban-scale air pollutants.     

Environmental concentrations of boron, LAS, EDTA, NTA and Triclosan simulated with GREAT-ER in the river Itter

A computer simulation of the environmental concentrations of some typical consumer-product ingredients was performed using the geo-referenced exposure model GREAT-ER (Geo-referenced Regional Environmental Assessment Tool for European Rivers) in the river Itter. Boron and LAS were chosen as typical detergent ingredients along with EDTA, NTA and Triclosan as examples of household and cosmetic product ingredients. The simulations were based on consumption figures of the respective chemical in consumer products in the year 2000. For EDTA, the consumption figure used for the calculation had to be extended to commercial products since the EDTA-use in domestic products could not account for the measured concentrations alone. The resulting PEC (Predicted Environmental Concentration) for all investigated compounds showed very good accordance to the measured concentrations in the Itter which were monitored in the same year. The concentrations did not deviate more than by a factor of 3. GREAT-ER's calculated 90th-percentile was never exceeded by the monitoring result thus reflecting a reasonable accuracy.