Chemical speciation of PM emissions from heavy-duty diesel vehicles equipped with diesel particulate filter (DPF) and selective catalytic reduction (SCR) retrofits

Four heavy-duty diesel vehicles (HDDVs) in six retrofitted configurations (CRT^®, V-SCRT^®, Z-SCRT^®, Horizon, DPX and CCRT^®) and a baseline vehicle operating without after--treatment were tested under cruise (50 mph), transient UDDS and idle driving modes. As a continuation of the work by Biswas et al. [Biswas, S., Hu, S., Verma, V., Herner, J., Robertson, W.J., Ayala, A., Sioutas, C., 2008. Physical properties of particulate matter (PM) from late model heavy-duty diesel vehicles operating with advanced emission control technologies. Atmospheric Environment 42, 5622–5634.] on particle physical parameters, this paper focuses on PM chemical characteristics (Total carbon [TC], Elemental carbon [EC], Organic Carbon [OC], ions and water-soluble organic carbon [WSOC]) for cruise and UDDS cycles only. Size-resolved PM collected by MOUDI–Nano-MOUDI was analyzed for TC, EC and OC and ions (such as sulfate, nitrate, ammonium, potassium, sodium and phosphate), while Teflon coated glass fiber filters from a high volume sampler were extracted to determine WSOC. The introduction of retrofits reduced PM mass emissions over 90% in cruise and 95% in UDDS. Similarly, significant reductions in the emission of major chemical constituents (TC, OC and EC) were achieved. Sulfate dominated PM composition in vehicle configurations (V-SCRT^®-UDDS, Z-SCRT^®-Cruise, CRT^® and DPX) with considerable nucleation mode and TC was predominant for configurations with less (Z-SCRT^®-UDDS) or insignificant (CCRT^®, Horizon) nucleation. The transient operation increases EC emissions, consistent with its higher accumulation PM mode content. In general, solubility of organic carbon is higher (average ～5 times) for retrofitted vehicles than the baseline vehicle. The retrofitted vehicles with catalyzed filters (DPX, CCRT^®) had decreased OC solubility (WSOC/OC: 8–25%) unlike those with uncatalyzed filters (SCRT^®s, Horizon; WSOC/OC ～ 60–100%). Ammonium was present predominantly in the nucleation mode, indicating that ternary nucleation may be the responsible mechanism for formation of these particles.     

Modeling the atmospheric transport and deposition of polychlorinated dibenzo-p-dioxins and dibenzofurans in North America

The atmospheric fate of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) was simulated for the year 2000 in North America using a SMOKE/CMAQ-based chemical transport model that was modified for this purpose. The 1999 USEPA emission inventories of PCDD/Fs and criteria pollutants were used. The 1995 Canadian emission inventory of criteria pollutants and the 1995 Canadian area source emissions for PCDD/Fs were used with the 2000 Canadian point source emissions. Modifications to CMAQ involved coupling it with dual organic matter (OM) absorption and black carbon (BC) adsorption models to calculate PCDD/F gas–particle partitioning. The model satisfactorily reproduced the particle bound fractions at all rural sites for which there were measured data and across the whole domain, the modeled vs. measured differences in particle bound fractions were less than 20% for nearly all congeners. The model predicted ambient air PCDD/F concentrations were also consistent with measurements. Simulated deposition fluxes were within 58% of direct measurements. PCDD/F atmospheric depositions to each of the Great Lakes were estimated for the year 2000. The results indicate that approximately 76% of the total deposition of PCDD/Fs to the Great Lakes (in W-TEQ, or toxic equivalent units as defined by the World Health Organization) is attributed to PCDD/Fs absorbed into OM in aerosol. For all of the lakes, more than 92% of all deposition is particle phase wet deposition and only 5–8% is particle phase dry deposition. Wet deposition from the gas phase is negligible. Of the 17 toxic PCDD/F congeners, the Cl_4–5DD/F compounds contribute approximately 70% to the total atmospheric deposition to the Great Lakes. The seasonal changes in the PCDD/F deposition flux track variations in ambient temperature.     

Historical trends in the mass and chemical species concentrations of coarse particulate matter in the Los Angeles Basin and relation to sources and air quality regulations

To assess the impact of past, current and proposed air quality regulations on coarse particulate matter (CPM), the concentrations of CPM mass and its chemical constituents were examined in the Los Angeles Basin from 1986 to 2009 using PM data acquired from peer-reviewed journals and regulatory agency database. PM10 mass levels decreased by approximately half from 1988 to 2009 at the three sampling sites examined- located in downtown Los Angeles, Long Beach and Riverside. Annual CPM mass concentrations were calculated from the difference between daily PM10 and PM2.5 from 1999 to 2009. High CPM episodes driven by high wind speed/stagnant condition caused year-to-year fluctuations in the 99th/98th percentile CPM levels. The reductions of average CPM levels were lower than those of PM10 in the same period, therefore the decrease of PM10 level was mainly driven by reductions in the emission levels of PM2.5 (or fine) particles, as demonstrated by the higher annual reduction of average PM2.5 (0.92 microg/m3) compared with CPM (0.39 microg/m3) from 1999 to 2009 in downtown Los Angeles despite their comparable concentrations. This is further confirmed by the significant decrease of Ni, Cr, V and EC in the coarse fraction after 1995. On the other hand, the levels of several inorganic ions (sulfate, chloride and to a lesser extent nitrate) remained comparable. From 1995 to 2008, levels of Cu, a tracer of brake wear, either remained similar or decreased at a smaller rate compared with elements of combustion origins. This differential reduction of CPM components suggests that past and current regulations may have been more effective in reducing fugitive dust (Al, Fe and Si) and combustion emissions (Ni, Cr, V, and EC) rather than CPM from vehicular abrasion (Cu) and inorganic ions (NO3(-), SO4(2-) and Cl(-)) in urban areas. Implications: Limited information is currently available to provide the scientific basis for understanding the sources and physical and chemical variations of CPM, and their relations to air quality regulations and adverse health effects. This study investigates the historical trends of CPM mass and its chemical components in the Los Angeles Basin to advance our understanding on the impact of past and current air quality regulations on the coarse fraction of PM. The results of this study will aid policy makers to design more targeted regulations to control CPM sources to ensure substantial protection of public health from CPM exposure. Supplemental Materials: Supplemental materials are available for this article. Go to the publisher's online edition of the Journal of the Air & Waste Management Association for (1) details of the sampling sites and (2) the daily concentrations of high CPM/PM10 episodes.     

Environmental impact of aquaculture and countermeasures to aquaculture pollution in China

GOAL, SCOPE AND BACKGROUND: Aquaculture activities are well known to be the major contributor to the increasing level of organic waste and toxic compound in the aquaculture industry. Along with the development of intensive aquaculture in China, concerns are evoked about the possible effects of ever-increasing aquaculture waste both on productivity inside the aquaculture system and on the ambient aquatic ecosystem. Therefore, it is apparent that appropriate waste treatment processes are needed for sustaining aquaculture development. This review aims at identifying the current status of aquaculture and aquaculture waste production in China. MAIN FEATURES: China is the world's largest fishery nation in terms of total seafood production volume, a position it has maintained continuously since 1990. Freshwater aquaculture is a major part of the Chinese fishery industry. Marine aquaculture in China consists of both land-based and offshore aquaculture, with the latter mostly operated in shallow seas, mud flats and protected bays. The environmental impacts of aquaculture are also striking. RESULTS: Case studies on pollution hot spots caused by aquaculture have been introduced. The quality and quantity of waste from aquaculture depends mainly on culture system characteristics and the choice of species, but also on feed quality and management. Wastewater without treatment, if continuously discharged into the aquatic environment, could result in remarkable elevation of the total organic matter contents and cause considerable economy lost. Waste treatments can be mainly classified into three categories: physical, chemical and biological methods. DISCUSSION: The environmental impacts of different aquaculture species are not the same. New waste treatments are introduced as references for the potential development of the waste treatment system in China. The most appropriate waste treatment system for each site should be selected according to the sites' conditions and financial status as well as by weighing the advantages and disadvantages of each system. Strategies and perspectives for sustainable aquaculture development are proposed, with the emphasis on environmental protection. CONCLUSIONS: Negative effects of waste from aquaculture to aquatic environment are increasingly recognized, though they were just a small proportion to land-based pollutants. Properly planned use of aquaculture waste alleviates water pollution problems and not only conserves valuable water resources but also takes advantage of the nutrients contained in effluent. It is highly demanding to develop sustainable aquaculture which keeps stocking density and pollution loadings under environmental capacity. RECOMMENDATIONS AND PERSPECTIVES: The traditional procedures for aquaculture waste treatment, mainly based on physical and chemical means, should be overcome by more site-specific approaches, taking into account the characteristics and resistibility of the aquatic environment. Further research needs to improve or optimize the current methods of wastewater treatment and reuse. Proposed new treatment technology should evaluate their feasibility at a larger scale for practical application.     

Body mass index and serum chlorinated dibenzo-p-dioxin and dibenzofuran levels

Several studies have found that current levels of 2,3,7,8 tetrachlorodibenzo-p-dioxin in serum lipids are related to age with older persons generally having higher levels. To account for this age pattern, reference ranges based on national samples have been established in order to allow determination of background levels for regional studies. In several studies, body mass index (BMI), has also been associated with current 2,3,7,8 tetrachlorodibenzo-p-dioxin levels with increasing body mass index related to increasing levels. We measured lipid-adjusted serum levels for all 2,3,7,8-substituted dioxins and furans in 62 chemical manufacturing workers with chlorophenol exposures and 36 workers without chlorophenol exposures employed at the same location. We then assessed the impact of age and BMI on the serum levels of all these compounds in the presence of other potential confounders. We found that both factors are important independent determinants of serum levels of 2,3,7,8-substituted dioxins and furans. Specifically, age and BMI are both important factors for assessing background levels of 2,3,7,8 tetrachlorodibenzo-p-dioxin, 1,2,3,7,8 pentachlorodibenzo-p-dioxin and the calculated total toxic equivalency. BMI, but not age, is important for assessing background levels of higher chlorinated dioxins and some hexachlorofurans. We conclude that age and BMI are both important considerations when comparing a potentially exposed group to a referent group, or to national norms. Further, age and BMI may also be important in epidemiology studies where back-extrapolation from current dioxin levels is used to assess historical chlorophenol exposure.     

Tetracycline as a selector for resistant bacteria in activated sludge

Tetracycline, one of the most widely used antibiotics, is excreted into wastewater after consumption by humans and animals. The focus of this research was to evaluate the fate of tetracycline resistant bacteria in the activated sludge process as a function of tetracycline loading. The studies were conducted with aerobic biological sequencing batch reactors (SBRs). When comparing 250 microgl(-1) tetracycline fed SBRs with parallel SBRs having a background influent wastewater tetracycline concentration of approximately 1 microgl(-1), tetracycline fed reactors were found to have increased concentrations and production rates of tetracycline resistant bacteria, higher net growth rates of resistant bacteria, and higher percentages of tetracycline resistant bacteria, which were amplified by increase in organic loading and growth rates.     

Accumulation patterns of organochlorines in juveniles of Arctocephalus australis found stranded along the coast of Southern Brazil

The present study was conducted to elucidate the specific distributions of organochlorine (OC) compounds in various tissues and organs of juveniles of the South American fur seal (Arctocephalus australis) found stranded on beaches in southern Brazil. The OC residue concentrations occurred in the following order: PCBs>DDTs>CHLs>HCHs>HCB. OC concentrations in blubber were higher than other tissues (e.g. PCBs, 2480 ng g(-1) wet weight; DDTs, 660 ng g(-1) wet weight) indicating a positive association with lipid content (except for HCB). However, the poor nutritional status of these animals, possibly following a starvation period, is likely to have allowed the remobilization of organochlorines stored in lipids to other tissues throughout the body, increasing their vulnerability to toxic effects and possibly affecting their survival capability.     

Chemical contamination of the Rybinsk Reservoir, northwest Russia: relationship between liver polychlorinated biphenyls (PCB) content and health indicators in bream (Abramis brama)

The Rybinsk Reservoir (Russia) is the largest artificial waterbody in Europe (4550 km2) and provides drinking water for population of the cities located along the coast line. Industrialization in Cherepovets at the northeastern portion of the reservoir, including one of the largest metallurgical facilities in Europe, has resulted in chemical contamination of the reservoir. The extent of polychlorinated biphenyls (PCB) contamination in bream liver, a common fish species, taken from six locations in the Rybinsk Reservoir and Volga River, and biochemical and morphometric biomarkers of fish health were investigated. Liver PCB concentrations ranged from non-detected to 3.4 microg/g wet wt of liver, with the greatest concentrations found in fish taken near the industrialized area in Sheksna Reach of Rybinsk Reservoir. The source of the bream contamination is the PCB pollution of bottom organisms and sediments conditioned with industrialization facilities of Cherepovets. The patterns of the PCB congeners in the livers of bream taken near Cherepovets were similar at all of the stations that were sampled around the reservoir and Volga River. Among the common fish health biomarkers used only liver total ChE activity and liver-somatic index in bream near Cherepovets can reflect environmental pollution. Other morphometric (FCF, Clark's condition factors, and spleen-somatic index) and biochemical (protein content and acetylcholinesterase activity in the brain) biomarkers related with fish health varied among locations, but were not correlated to the concentrations of PCBs in the bream livers.     

Managing Baltic Sea fisheries under contrasting production and predation regimes: ecosystem model analyses

Based on an earlier published ecosystem model, we have explored possible effects of different management scenarios for the Baltic Sea. The scenarios include an oligotrophication of the system, a drastic increase in the number of seals, and changes in the fishery management. From these simulations we conclude that fisheries, seals, and eutrophication all have strong and interacting impacts on the ecosystem. These interactions call for integrated management. The modeling highlights the potential for conflicts among management mandates such as flourishing fisheries, rebuilt seal populations, and substantially reduced eutrophication. The results also suggest that fisheries management reference points have to be adjusted in response to changes in the presence of natural predators or ecosystem productivity.     

Trends of brominated diphenyl ethers in fresh and archived Great Lakes fish (1979-2005)

While few environmental measurements of brominated diphenyl ethers (BDEs) were completed prior to the mid-1990s, analysis of appropriately archived samples might enable the determination of contaminant trends back to the introduction of these chemicals. In this paper, we first investigate the stability of BDEs in archived frozen and extracted fish samples, and then characterize trends of these chemicals in rainbow smelt (Osmerus mordax) and lake trout (Salvelinus namaycush) in each of the Great Lakes between 1979 and 2005. We focus on the four most common congeners (BDE-47, 100, 99 and 153) and use a change-point analysis to detect shifts in trends. Analyses of archived fish samples yielded precise BDE concentration measurements with only small losses (0.8% per year in frozen fish tissues, 2.2% per year in refrigerated extracts). Trends in fish from all Great Lakes showed large increases in BDE concentrations that started in the early to mid-1980s with fairly consistent doubling times (generally 2-4 years except in Lake Erie smelt where levels increased very slowly), though concentrations and trends show differences by congener, fish species and lake. The most recent data show that accumulation rates are slowing, and concentrations of penta- and hexa-congeners in trout from Lakes Ontario and Michigan and smelt from Lake Ontario started to decrease in the mid-1990s. Trends in smelt and trout are evolving somewhat differently, and trout concentrations in the five lakes are now ranked as Michigan>Superior=Ontario>Huron=Erie, and smelt concentrations as Michigan>Ontario>Huron>Superior>Erie. The analysis of properly archived samples permits the reconstruction of historical trends, congener distributions, biomagnification and other information that can aid the understanding and management of these contaminants.