Assessment of non-occupational exposure to polycyclic aromatic hydrocarbons through personal air sampling and urinary biomonitoring

Non-occupational inhalation and ingestion exposure to polycyclic aromatic hydrocarbons (PAHs) has been studied in 8 non-smoking volunteers through personal air sampling and urinary biomonitoring. The study period was divided into 4 segments (2 days/segment), including weekdays with regular commute and weekends with limited traffic related exposures; each segment had a high or low PAH diet. Personal air samples were collected continuously from the subjects while at home, at work, and while commuting to and from work. All urine excretions were collected as individual samples during the study. In personal air samples, 28 PAHs were measured, and in urine samples 9 mono-hydroxylated metabolites (OH-PAHs) from 4 parent PAHs (naphthalene, fluorene, phenanthrene and pyrene) were measured. Naphthalene was found at higher concentrations in air samples collected at the subjects' residences, whereas PAHs with four or more aromatic rings were found at higher levels in samples taken while commuting. Urinary OH-PAH biomarker levels increased following reported high inhalation and/or dietary exposure. On days with a low PAH diet, the total amount of inhaled naphthalene during each 24-hour period was well correlated with the amount of excreted naphthols, as was, to a lesser extent, fluorene with its urinary metabolites. During days with a high dietary intake, only naphthalene was significantly correlated with its excreted metabolite. These findings suggest that this group of non-occupational subjects were exposed to naphthalene primarily through indoor air inhalation, and exposed to other PAHs such as pyrene mainly through ingestion.     

Geographic Analysis of Species Richness and Community Attributes of Forest Birds from Survey Data in the Mid-Atlantic Integrated Assessment Region

Species richness of local communities is a state variable commonly used in community ecology and conservation biology. Investigation of spatial and temporal variations in richness and identification of factors associated with these variations form a basis for specifying management plans, evaluating these plans, and for testing hypotheses of theoretical interest. However, estimation of species richness is not trivial: species can be missed by investigators during sampling sessions. Sampling artifacts can lead to erroneous conclusions on spatial and temporal variation in species richness. Here we use data from the North American Breeding Bird Survey to estimate parameters describing the state of bird communities in the Mid-Atlantic Assessment (MAIA) region: species richness, extinction probability, turnover and relative species richness. We use a recently developed approach to estimation of species richness and related parameters that does not require the assumption that all the species are detected during sampling efforts. The information presented here is intended to visualize the state of bird communities in the MAIA region. We provide information on 1975 and 1990. We also quantified the changes between these years. We summarized and mapped the community attributes at a scale of management interest (watershed units).     

Status of Aquatic Bioassessment in U.S. EPA Region IX

U.S. EPA Region IX is supporting bioassessment programs in Arizona, California, Hawaii and Nevada using biocriteria program and Regional Environmental Monitoring and Assessment Program (R-EMAP) resources. These programs are designed to improve the state, tribal and regional ability to determine the status of water quality. Biocriteria program funds were used to coordinate with Arizona, California and Hawaii which resulted in these states establishing reference conditions and in developing biological indices. U.S. EPA Region IX has initiated R-EMAP projects in California and Nevada. These U.S. EPA Region IX sponsored programs have provided an opportunity to interact with the States and provide them with technical and management support. In Arizona, several projects are being conducted to develop the State's bioassessment program. These include the development of a rotational random monitoring program; a regional reference approach for macroinvertebrate bioassessments; ecoregion approach to testing and adoption of an alternate regional classification system; and development of warm-water and cold-water indices of biological integrity. The indices are projected to be used in the Arizona Department of Environmental Quality (ADEQ) 2000 water quality assessment report. In California, an Index of Biological Integrity (IBI) has been developed for the Russian River Watershed using resources from U.S. EPA's Non-point Source (NPS) Program grants. A regional IBI is under development for certain water bodies in the San Diego Regional Water Quality Control Board. Resources from the U.S. EPA Biocriteria program are being used to support the California Aquatic Bioassessment Workgroup (CABW) in conjunction with the California Department of Fish & Game (CDFG), and to support the Hawaii Department of Health (DoH) Bioassessment Program to refine biological metrics. In Nevada, R-EMAP resources are being used to create a baseline of aquatic information for the Humboldt River watershed. U.S. EPA Region IX is presently working with the Nevada Division of Environmental Protection (NDEP) to establish a Nevada Aquatic Bioassessment Workgroup. Future R-EMAP studies will occur in the Calleguas Creek watershed in Southern California, and in the Muddy and Virgin River watersheds in southern Nevada, and the Walker River watershed in eastern California and west-central Nevada.     

Lead forms in urban turfgrass and forest soils as related to organic matter content and pH

Identification of reference streams and human disturbance gradients are crucial steps in assessing the effects of human disturbances on stream health. We describe a process for identifying reference stream reaches and assessing disturbance gradients using readily available, geo-referenced stream and human disturbance databases. We demonstrate the utility of this process by applying it to wadeable streams in Michigan, USA, and use it to identify which human disturbances have the greatest impact on streams. Approximately 38% of cold-water and 16% of warm-water streams in Michigan were identified as being in least-disturbed condition. Conversely, approximately 3% of cold-water and 4% of warm-water streams were moderately to severely disturbed by landscape human disturbances. Anthropogenic disturbances that had the greatest impact on moderately to severely disturbed streams were nutrient loading and percent urban land use within network watersheds. Our process for assessing stream health represents a significant advantage over other routinely used methods. It uses inter-confluence stream reaches as an assessment unit, permits the evaluation of stream health across large regions, and yields an overall disturbance index that is a weighted sum of multiple disturbance factors. The robustness of our approach is linked to the scale of disturbances that affect a stream; it will be less robust for identifying less degraded or reference streams with localized human disturbances. With improved availability of high-resolution disturbance datasets, this approach will provide a more complete picture of reference stream reaches and factors contributing to degradation of stream health.     

Estimation of required monitoring time for obtaining validation data in enclosed spaces

Methods for estimating airborne contaminant concentrations at specific locations within enclosed spaces, such as mathematical models and computational fluid dynamics (CFD), often are validated against directly measured concentrations. However, concentration variation with time introduces uncertainty into the measured concentration. Failure to determine monitoring time requirements can lead to errors in quantifying representative concentrations, which are likely to be attributed to errors in the method being validated. In the current study, to obtain the representative concentrations at multiple locations with a direct reading instrument, we used the standard deviation ratio (SDR) method to determine the required minimum monitoring time within a specified precision limit. To demonstrate the use of the SDR approach in constructing precision confidence intervals, tracer gas concentrations at nine sampling locations in an experimental room were measured to obtain population parameters. Three flow rates of 0.9, 3.3 and 5.5 m(3) min(-1) were employed and contaminant concentrations were measured using a photoionization analyser. Monitoring time requirements varied substantially with location within the room and were strongly dependent upon the flow rate of air through the room. The proposed method would be very useful for industrial hygienists and indoor air researchers who sometimes need to obtain several hundred measured concentrations for validation purposes or to perform tests under repeatable conditions in enclosed spaces. This study also showed that the proposed method can be used to devise efficient indoor monitoring strategies.     

Black carbon particulate matter emission factors for buoyancy-driven associated gas flares

Flaring is a technique used extensively in the oil and gas industry to burn unwanted flammable gases. Oxidation of the gas can preclude emissions of methane (a potent greenhouse gas); however, flaring creates other pollutant emissions such as particulate matter (PM) in the form of soot or black carbon (BC). Currently available PM emissionfactors for flares were reviewed and found to be questionably accurate, or based on measurements not directly relevant to open-atmosphere flares. In addition, most previous studies of soot emissions from turbulent diffusion flames considered alkene or alkyne based gaseous fuels, and few considered mixed fuels in detail and/or lower sooting propensity fuels such as methane, which is the predominant constituent of gas flared in the upstream oil and gas industry. Quantitative emission measurements were performed on laboratory-scale flares for a range of burner diameters, exit velocities, and fuel compositions. Drawing from established standards, a sampling protocol was developed that employed both gravimetric analysis of filter samples and real-time measurements of soot volume fraction using a laser-induced incandescence (LII) system. For the full range of conditions tested (burner inner diameter [ID] of 12.7-76.2 mm, exit velocity 0.1-2.2 m/sec, 4- and 6-component methane-based fuel mixtures representative of associated gas in the upstream oil industry), measured soot emission factors were less than 0.84 kg soot/10(3) m3 fuel. A simple empirical relationship is presented to estimate the PM emission factor as a function of the fuel heating value for a range of conditions, which, although still limited, is an improvement over currently available emission factors.     

Historical trends in the mass and chemical species concentrations of coarse particulate matter in the Los Angeles Basin and relation to sources and air quality regulations

To assess the impact of past, current and proposed air quality regulations on coarse particulate matter (CPM), the concentrations of CPM mass and its chemical constituents were examined in the Los Angeles Basin from 1986 to 2009 using PM data acquired from peer-reviewed journals and regulatory agency database. PM10 mass levels decreased by approximately half from 1988 to 2009 at the three sampling sites examined- located in downtown Los Angeles, Long Beach and Riverside. Annual CPM mass concentrations were calculated from the difference between daily PM10 and PM2.5 from 1999 to 2009. High CPM episodes driven by high wind speed/stagnant condition caused year-to-year fluctuations in the 99th/98th percentile CPM levels. The reductions of average CPM levels were lower than those of PM10 in the same period, therefore the decrease of PM10 level was mainly driven by reductions in the emission levels of PM2.5 (or fine) particles, as demonstrated by the higher annual reduction of average PM2.5 (0.92 microg/m3) compared with CPM (0.39 microg/m3) from 1999 to 2009 in downtown Los Angeles despite their comparable concentrations. This is further confirmed by the significant decrease of Ni, Cr, V and EC in the coarse fraction after 1995. On the other hand, the levels of several inorganic ions (sulfate, chloride and to a lesser extent nitrate) remained comparable. From 1995 to 2008, levels of Cu, a tracer of brake wear, either remained similar or decreased at a smaller rate compared with elements of combustion origins. This differential reduction of CPM components suggests that past and current regulations may have been more effective in reducing fugitive dust (Al, Fe and Si) and combustion emissions (Ni, Cr, V, and EC) rather than CPM from vehicular abrasion (Cu) and inorganic ions (NO3(-), SO4(2-) and Cl(-)) in urban areas. Implications: Limited information is currently available to provide the scientific basis for understanding the sources and physical and chemical variations of CPM, and their relations to air quality regulations and adverse health effects. This study investigates the historical trends of CPM mass and its chemical components in the Los Angeles Basin to advance our understanding on the impact of past and current air quality regulations on the coarse fraction of PM. The results of this study will aid policy makers to design more targeted regulations to control CPM sources to ensure substantial protection of public health from CPM exposure. Supplemental Materials: Supplemental materials are available for this article. Go to the publisher's online edition of the Journal of the Air & Waste Management Association for (1) details of the sampling sites and (2) the daily concentrations of high CPM/PM10 episodes.     

Land application of tylosin and chlortetracycline swine manure: Impacts to soil nutrients and soil microbial community structure

The land application of aged chortetracycle (CTC) and tylosin-containing swine manure was investigated to determine associated impacts to soil microbial respiration, nutrient (phosphorus, ammonium, nitrate) cycling, and soil microbial community structure under laboratory conditions. Two silty clay loam soils common to southeastern South Dakota were used. Aerobic soil respiration results using batch reactors containing a soil-manure mixture showed that interactions between soil, native soil microbial populations, and antimicrobials influenced CO₂ generation. The aged tylosin treatment resulted in the greatest degree of CO₂ inhibition, while the aged CTC treatment was similar to the no-antimicrobial treatment. For soil columns in which manure was applied at a one-time agronomic loading rate, there was no significant difference in soil-P behavior between either aged CTC or tylosin and the no-antimicrobial treatment. For soil-nitrogen (ammonium and nitrate), the aged CTC treatment resulted in rapid ammonium accumulation at the deeper 40cm soil column depth, while nitrate production was minimal. The aged CTC treatment microbial community structure was different than the no-antimicrobial treatment, where amines/amide and carbohydrate chemical guilds utilization profile were low. The aged tylosin treatment also resulted in ammonium accumulation at 40 cm column depth, however nitrate accumulation also occurred concurrently at 10 cm. The microbial community structure for the aged tylosin was also significantly different than the no-antimicrobial treatment, with a higher degree of amines/amides and carbohydrate chemical guild utilization compared to the no-antimicrobial treatment. Study results suggest that land application of CTC and tylosin-containing manure appears to fundamentally change microbial-mediated nitrogen behavior within soil A horizons.