Evaluation of bendiocarb cytotoxicity in mammalian and insect cell cultures

There is an increasing need for rapid and easily interpreted in vitro assays to screen for possible cytotoxicity of pesticides. The objective of this study was to investigate the effect of the carbamate insecticide bendiocarb on mammalian and insect cell cultures. The cytotoxicity of this insecticide was evaluated by cell proliferation and cellular damage was assessed by evaluation of the cytopathic effect and lactate dehydrogenase (LDH) leakage. Cells of insect origin (Sf21) were the most sensitive to bendiocarb with significant (P < 0.01) suppression of their proliferative activity ranging from 10(-1)-10(-5) M. However, significant suppression of proliferative activity was also recorded in rat liver cells (WBF344; 10(-1)-10(-3) M; P < 0.01-0.05) and rabbit kidney cells (RK13; 10(-1) M; P < 0.01). In contrast with the proliferation activity of cells, a cytopathic effect based on cellular damage and LDH leakage into the medium was observed only at the highest concentration (10(-1) M) in RK 13 and WBF344 cells, but not in the Sf21 insect cell line. Our results indicate that bendiocarb exposure caused a cell-type dependent decrease in cell proliferation; however, cell damage and LDH leakage into the medium were not present or were strongly limited, dependent on the cell phenotype. Cell proliferation was shown as a sensitive indicator for evaluation of the cytotoxic effect of bendiocarb in vitro; on the other hand, microscopic signs of cellular damage and LDH leakage were insufficient in vitro markers.     

Perfluorinated alkylated substances in vegetables collected in four European countries; occurrence and human exposure estimations

The human diet is recognised as one possible major exposure route to the overall perfluorinated alkylated substances (PFAS) burden of the human population, resulting directly from contamination of dietary food items, as well as migration of PFAS from food packaging or cookware. Most European countries carry out national monitoring programs (food basket studies) to monitor contamination with pollutants. Usually, for PFASs, non-coordinated approaches are used in Europe, since food basket studies are mainly carried out by national authorities following national requirements and questions, making comparisons between different countries difficult. A harmonised sampling campaign collecting similar food items in a uniform procedure enabling direct comparison between different regions in Europe was designed. We selected four countries (Belgium, Czech Republic, Italy and Norway), representing the four regions of Europe: West, East, South and North. In spring 2010 and 2011, 20 different types of vegetables were sampled in Belgium, Czech Republic, Italy and Norway. Perfluorinated carboxylic acids (PFCAs) were the main group of detected PFASs, with perfluorinated octanoic acid (PFOA) as the most abundant PFCA (with exception of samples from Czech Republic), followed by perfluorinated hexanoic acid and perfluorinated nonanoic acid. Dietary intake estimates for PFOA show only low human exposure due to vegetable consumption for adults and children, mostly governed by high intake of potatoes.     

Hydrochemical characteristics of mine waters from abandoned mining sites in Serbia and their impact on surface water quality

Upon completion of exploration and extraction of mineral resources, many mining sites have been abandoned without previously putting environmental protection measures in place. As a consequence, mine waters originating from such sites are discharged freely into surface water. Regional scale analyses were conducted to determine the hydrochemical characteristics of mine waters from abandoned sites featuring metal (Cu, Pb–Zn, Au, Fe, Sb, Mo, Bi, Hg) deposits, non-metallic minerals (coal, Mg, F, B) and uranium. The study included 80 mine water samples from 59 abandoned mining sites. Their cation composition was dominated by Ca²⁺, while the most common anions were found to be SO₄ ^2? and HCO₃ ^?. Strong correlations were established between the pH level and metal (Fe, Mn, Zn, Cu) concentrations in the mine waters. Hierarchical cluster analysis was applied to parameters generally indicative of pollution, such as pH, TDS, SO₄ ^2?, Fe total, and As total. Following this approach, mine water samples were grouped into three main clusters and six subclusters, depending on their potential environmental impact. Principal component analysis was used to group together variables that share the same variance. The extracted principal components indicated that sulfide oxidation and weathering of silicate and carbonate rocks were the primary processes, while pH buffering, adsorption and ion exchange were secondary drivers of the chemical composition of the analyzed mine waters. Surface waters, which received the mine waters, were examined. Analysis showed increases of sulfate and metal concentrations and general degradation of surface water quality.     

Effect of Dursban 480 EC (chlorpyrifos) and Talstar 10 EC (bifenthrin) on the physiological and genetic diversity of microorganisms in soil

This investigation was undertaken to determine the impact of the insecticides Dursban 480 EC (with organophosphate compound chlorpyrifos as the active ingredient) and Talstar 10 EC (with pyrethroid bifenthrin as the active ingredient) on the respiration activity and microbial diversity in a sandy loam luvisol soil. The insecticides were applied in two doses: the maximum recommended dose for field application (15 mg kg^?1 for Dursban 480 EC and 6 mg kg^?1 for Talstar 10 EC) and a 100-fold higher dose for extrapolation of their effect. Bacterial and fungal genetic diversity was analysed in soil samples using PCR DGGE and the functional diversity (catabolic potential) was studied using BIOLOG EcoPlates at 1, 3, 7, 14, 28, 56 and 112 days after insecticide application. Five bacterial groups (α, β, γ proteobacteria, firmibacteria and actinomycetes) and five groups of fungi or fungus-like microorganisms (Ascomycota, Basidiomycota, Chytridiomycota, Oomycota and Zygomycota) were analysed using specific primer sets. This approach provides high resolution of the analysis covering majority of microorganisms in the soil. Only the high-dose Dursban 480 EC significantly changed the community of microorganisms. We observed its negative effect on α- and γ-proteobacteria, as the number of OTUs (operational taxonomic units) decreased until the end of incubation. In the β-proteobacteria group, initial increase of OTUs was followed by strong decrease. Diversity in the firmibacteria, actinomycetes and Zygomycota groups was minimally disturbed by the insecticide application. Dursban 480 EC, however, both positively and negatively affected certain species. Among negatively affected species Sphingomonas, Flavobacterium or Penicillium were detected, but Achromobacter, Luteibacter or Aspergillus were supported by applied insecticide. The analysis of BIOLOG plates using AWCD values indicated a significant increase in metabolic potential of microorganisms in the soil after the high-dose Dursban application. Analysis of respiration demonstrated high microbial activity after insecticide treatments; thus, microbial degradation was relatively fast. The half-life of the active insecticide compounds were estimated within the range of 25 to 27 days for Talstar and 6 to 11 days for Dursban and higher doses stimulated degradation. The recommended dose levels of both insecticides can be considered as safe for microbial community in the soil.     

Fog as a Fresh-Water Resource: Overview and Perspectives

The collection of fog water is a simple and sustainable technology to obtain fresh water for afforestation, gardening, and as a drinking water source for human and animal consumption. In regions where fresh water is sparse and fog frequently occurs, it is feasible to set up a passive mesh system for fog water collection. The mesh is directly exposed to the atmosphere, and the foggy air is pushed through the mesh by the wind. Fog droplets are deposited on the mesh, combine to form larger droplets, and run down passing into a storage tank. Fog water collection rates vary dramatically from site to site but yearly averages from 3 to 10 l m⁻² of mesh per day are typical of operational projects. The scope of this article is to review fog collection projects worldwide, to analyze factors of success, and to evaluate the prospects of this technology.     

On airborne nano/micro-sized wear particles released from low-metallic automotive brakes

The paper addresses the wear particles released from commercially available “low-metallic” automotive brake pads subjected to brake dynamometer tests. Particle size distribution was measured in situ and the generated particles were collected. The collected fractions and the original bulk material were analyzed using several chemical and microscopic techniques. The experiments demonstrated that airborne wear particles with sizes between 10 nm and 20 μm were released into the air. The numbers of nanoparticles (<100 nm) were by three orders of magnitude larger when compared to the microparticles. A significant release of nanoparticles was measured when the average temperature of the rotor reached 300 °C, the combustion initiation temperature of organics present in brakes. In contrast to particle size distribution data, the microscopic analysis revealed the presence of nanoparticles, mostly in the form of agglomerates, in all captured fractions. The majority of elements present in the bulk material were also detected in the ultra-fine fraction of the wear particles.     

Distribution pattern of PCBs,HCB and PeCB using passive air and soil sampling in Estonia

Background, aim, and scope  

Passive air sampling survey of the Central and Eastern Europe was initiated in 2006. This paper presents data on toxic organic compounds such as polychlorinated biphenyls (PCB 28, 52, 101, 118, 153, 138, and 180), hexachlorobenzene (HCB), pentachlorobenzene (PeCB), hexachlorocyclohexane compounds (α-HCH, β-HCH,γ-HCH, δ-HCH), and dichloro-diphenyl-trichloroethane (DDT) compounds (p,p′DDE, p,p′DDD, p,p′DDT, o,p′DDE, o,p′DDD, and o,p′DDT) determined in ambient air and soil samples collected at Estonian monitoring stations.     

Chloride concentration affects soil microbial community

We studied the effect of increased inorganic chloride concentration on forest soil microflora in a laboratory experiment. Microbial DNA extracted from experimental soil samples was amplified with PCR using primer pairs specifically amplifying bacterial, eukaryotic and fungal DNA fragments. The resulting amplified DNA was further used for terminal restriction fragment length polymorphism (TRFLP) analysis. Our work revealed that chloride concentration affects the indigenous microbial community in experimental soil. This was documented on an unidentified microorganism whose DNA was detectable in soil high in chloride but was not found in soil with low chloride concentration. The presence of the organism responsive to increased chloride concentration was associated with the highest observed value of chlorination of humic acid, suggesting possible role of this organism in soil chlorine turnover. High chloride concentration in the soil tended to decrease the rate of degradation of trichloroacetic acid. The problems connected with measurement of chlorination rates in soil are discussed.     

Rhizosphere localized cationic peroxidase from barley roots is strongly activated by cadmium and correlated with root growth inhibition

The activity of Cd-induced POD isozyme isolated from the surface of intact barley roots growing under some abiotic stress conditions (toxic metals: Al, Co, Cu, Hg; drought, NaCl, extreme temperatures: heat, cold) and compounds activating (2,4-D) or inhibiting (SHAM) POD activity as well as H(2)O(2) and H(2)O(2) scavenger (DTT) was characterized. Strong Cd concentration-dependent accumulation of one cationic POD isozyme was observed on PAGE, which correlated with Cd- and other stress induced root growth inhibition. This isoPOD is basic with isoelectric point about 9 and its localization is restricted only to the apical part of the barley root tip.     

Polymer selection for passive sampling: a comparison of critical properties

Next to the bi-phasic semipermeable membrane devices (SPMDs), single-phase passive samplers are becoming more popular for the sampling of hydrophobic contaminants. We therefore evaluated some critical properties of 13 polymers: low-density polyethylene (LDPE), polyoxymethylene (POM), silicone rubbers (SRs), including polydimethylsiloxane, and ethylene/octene co-polymer (EXACT). Polymer comparison included four critical properties: release of oligomers, swelling in solvents (dichloromethane, hexane, ethyl acetate, acetone and methanol), contaminant diffusion coefficients and partition coefficients for naphthalene, fluoranthene, benzo[a]pyrene and dibenz[a,h]anthracene. Amounts of extracted oligomers ranged from 2% to 4% for SRs and LDPE, to about 1% for EXACT. No oligomer release was observed for POM. Diffusion coefficients were higher in all SRs compared with LDPE and EXACT. No measurable diffusion was observed in POM after 24h of exposure. Differences in polymer-water partition coefficients spanned two orders of magnitude, with the lowest values observed for POM and the highest values observed for LDPE and EXACT. For the ten tested SRs, this range was less than 0.4 log units. Transport resistances estimated on the basis of diffusion coefficients and partition coefficients were generally lower for SRs than for LDPE and EXACT.