Accumulation of trinitrotoluene (TNT) in aquatic organisms: part 2--Bioconcentration in aquatic invertebrates and potential for trophic transfer to channel catfish (Ictalurus punctatus)

The potential of TNT to accumulate in aquatic organisms was assessed by determining bioconcentration factors for TNT and TNT biotransformation products using two benthic invertebrates (Chironomus tentans and Lumbriculus variegatus), and by determining the bioaccumulation factor of TNT and TNT biotransformation products due to TNT exposure via feeding for channel catfish (Ictalurus punctatus). In all three species, TNT was rapidly biotransformed resulting in minimal accumulation. The bioconcentration factors for parent TNT ranged from 3 to 4 ml g(-1) for the invertebrates studied, while the TNT bioaccumulation factor for catfish via oral exposure of food pellets was 2.4x10(-5) g g(-1) based on the concentration of TNT in the food pellet. As indicated by this small bioaccumulation factor, TNT accumulation in channel catfish through trophic transfer would be negligible compared to aqueous exposure (previously reported BCF of 0.79 ml g(-1)). TNT extractable biotransformation products accumulated to a greater degree than parent TNT for all three species. In addition, a large fraction of the radioactivity within all three species resisted solvent extraction. The highest bioconcentration factors occurred in L. variegatus with extractable radioactivity measuring 76 ml g(-1) and total radioactivity measuring 216 ml g(-1). Because the bioaccumulation of TNT is very low compared to the bioaccumulation of its biotransformation products, further research including identifying and determining the relative toxicities of these biotransformation products is necessary to fully evaluate the environmental risk posed by exposure to TNT.     

The use of zero‐valent iron injection to remediate groundwater: Results of a pilot test at the Marshall Space Flight Center

In situ treatability studies are being conducted to evaluate various in situ technologies to manage groundwater contamination at the NASA Marshall Space Flight Center in Huntsville, Alabama. The focus of these studies is to evaluate remediation options for contaminated (mostly aerobic) groundwater occurring within the basal portion of a clayey residuum called the rubble zone. The tension‐saturated media and unsaturated media lying above the rubble zone are also being treated where they make up a significant component of the contaminant mass. An in situ chemical reduction field pilot test was implemented (following bench‐scale tests) during July and August 2000. The test involved the injection of zero‐valent iron powder in slurry form, using the Ferox^SM process patented by ARS Technologies, Inc. The pilot test focused on trichloroethene (TCE)‐contaminated groundwater within the rubble zone. Maximum pre‐injection concentrations of about 72,800 micrograms per liter (μg/l) were observed and no secondary sources are believed to exist beneath the area. The potential presence of unexploded ordnance forced an implementation strategy where source area injections were completed, as feasible, followed by overlapping injections in a down gradient alignment to create a permeable reactive zone for groundwater migration. Eight post‐injection rounds of groundwater performance monitoring were completed. The results are encouraging, in terms of predicted responses and decreasing trends in contaminant levels. © 2003 Wiley Periodicals, Inc.     

Simulating Soil Water Content,Evapotranspiration, and Yield of Variably Irrigated Grain Sorghum Using AquaCrop

Use of models to simulate crop production has become important in optimizing irrigation management in arid and semiarid regions. However, applicability and performance of these models differ across regions, due to differences in environmental and management factors. The AquaCrop model was used to simulate soil water content (SWC), evapotranspiration (ET), and yield for grain sorghum under different irrigation regimes and dryland conditions at two sites in Central and Southern High Plains. Prediction error (P_e), estimated as the difference between simulated and measured divided by measured, for SWC ranged from ?17% to 4% in fully irrigated, ?3% to ?10% in limited irrigated, and ?16% to 25% in dryland treatments. The P_e within ±4%, ?5%, and ?17% to 24% were attained for seasonal ET under fully irrigated, limited irrigated, and dryland conditions, respectively. P_e values for grain yield were within those previously reported and ranged from ?10% to 12%, ?12% to 7%, and 9% to 17% for fully irrigated, limited irrigated and dryland conditions, respectively. Overall performance of the AquaCrop model showed it could be used as an effective tool for evaluating the impacts of variable crop and irrigation managements on the production of grain sorghum in the study area. Finally, the application of the model in the study area revealed planting date has a significant impact on sorghum yield and irrigation requirements, but the impact of planting density was negligible. Editor's note : This paper is part of the featured series on Optimizing Ogallala Aquifer Water Use to Sustain Food Systems. See the February 2019 issue for the introduction and background to the series.     

The crash severity impacts of fixed roadside objects

INTRODUCTION: This study analyzes the in-service performance of roadside hardware on the entire urban State Route system in Washington State by developing multivariate statistical models of injury severity in fixed-object crashes using discrete outcome theory. The objective is to provide deeper insight into significant factors that affect crash severities involving fixed roadside objects, through improved statistical efficiency along with disaggregate and multivariate analysis. METHOD: The developed models are multivariate nested logit models of injury severity and they are estimated with statistical efficiency using the method of full information maximum likelihood. RESULTS: The results show that leading ends of guardrails and bridge rails, along with large wooden poles (e.g. trees and utility poles) increase the probability of fatal injury. The face of guardrails is associated with a reduction in the probability of evident injury, and concrete barriers are shown to be associated with a higher probability of lower severities. Other variables included driver characteristics, which showed expected results, validating the model. For example, driving over the speed limit and driving under the influence of alcohol increase the probability of fatal accidents. Drivers that do not use seatbelts are associated with an increase in the probability of more severe injuries, even when an airbag is activated. IMPACT ON INDUSTRY: The presented models show the contribution of guardrail leading ends toward fatal injuries. It is therefore important to use well-designed leading ends and to upgrade badly performing leading ends on guardrails and bridges. The models also indicate the importance of protecting vehicles from crashes with rigid poles and tree stumps, as these are linked with greater severities and fatalities.     

加拉帕戈斯群岛移民和海参危机实例研究

加拉帕戈斯海参捕捞危机是由于大量的移民涌入、激烈的经济竞争以及软弱无力的管理机构所造成的一个典型例子.短时期内,海参捕捞已经成为加拉帕戈斯地区最有煽动性的争议问题.就对新的海洋资源进行高效捕捞来说关键因素并不是渔民本身,而是新的捕捞技术、银行贷款和水产市场.这说明造成每年海参捕捞危机的原因非常复杂而不仅仅因为不断增多的渔民加大了海参的捕捞量.本文通过人口普查数据和渔民注册登记数据分析了该群岛人口的增长情况.还通过一项民意调查来确定人们对海参捕捞和有关规定的态度.定性的采访揭示了海参繁荣的历史,同时海参监测信息也提供了年海参捕捞量的估计值.     

Common operations failure modes in the process industries

The Abnormal Situation Management^® (ASM^®) Consortium (This research study was sponsored by the Abnormal Situation Management (ASM) Consortium. ASM^® and Abnormal Situation Management^® are registered trademarks of Honeywell International, Inc.) funded a study to investigate common failure modes and root causes associated with operations practices. The study team analyzed 20 public and 12 private incident reports using the TapRoot^® methodology to identify root causes. These root causes were mapped to operations practice failures. This paper describes the top ten operations failure modes identified in the analysis. Specific recommendations include how to analyze plant incident reports to better understand the sources of systemic failures and improve plant operating practices.