Effect of delayed first feeding on larval performance of the spider crab Maja brachydactyla assessed by digestive enzyme activities and biometric parameters

The effect of food deprivation on larval performance of the spider crab Maja brachydactyla was studied in terms of survival, moulting capacity, size, weight and enzymatic activities. Five feeding treatments that differed in the initial age of first feeding larvae (fed from hatching, 2, 4 and 6 days post-hatching and unfed) were tested for 20 days. Newly hatched larvae kept without food supply lasted for 10 days and did not moult; with 50% survival observed at 6 days post-hatching. Larvae (zoea I stage) were only able to tolerate 2 days of food deprivation after the onset of exogenous feeding without their performance being compromised. Multivariate analyses suggest that digestive enzyme activities may be good indicators of the nutritional condition of larvae.     

Post-breeding migration in male great bustards: low tolerance of the heaviest Palaearctic bird to summer heat

Radio tracking of 142 males captured at 44 leks in Spain showed that partial migration of great bustard males in summer is a widespread behaviour in many Iberian populations, in contrast to their previously assumed sedentariness. A variable number of males migrated immediately after mating to summering areas with lower temperatures and human population densities and more trees and rainfall levels than the breeding sites. Birds selected there fields with trees and sunflower crops which provided shade during the hottest midday hours and protective cover against predators. Males breeding in areas with higher July temperatures had a higher tendency to migrate, and males from hotter, southern regions migrated longer distances than those from milder, northern regions and showed a preferred northward direction. These results confirmed various predictions from the weather sensitivity hypothesis, suggesting that summer migration of great bustard males represents primarily an adaptation to escape the summer heat of most breeding areas in central and southern Iberia. The hypothesis that males migrated to benefit from higher food availability at the summering areas could not be rejected by our results. Finally, migrating males also gained more tranquillity during the post-breeding moult due to the lower human population density at the summering areas. Summer migration of Iberian great bustard males may thus be interpreted as a form of behavioural thermoregulation which has not been described for other Palaearctic populations of this species or for other bird species breeding in temperate latitudes.     

Automated method for the determination of total arsenic and selenium in natural and drinking water by HG-AAS

A multicommutated flow system was designed and evaluated for the determination of total arsenic and selenium by Hydride Generation Atomic Absorption Spectrometry (HG-AAS). It was applied to the determination of arsenic and selenium in samples of natural and drinking water. Detection limits were 0.46 and 0.08 μg l⁻¹ for arsenic and selenium, respectively; sampling frequency was 120 samples h⁻¹ for arsenic and 160 samples h⁻¹ for selenium. Linear ranges found were 1.54–10 μg l⁻¹ (R = 0.999) for arsenic and 0.27–27 μg l⁻¹ (R = 0.999) for selenium. Accuracy was evaluated by spiking various water samples and using a reference material. Recoveries were in the range 95–116%. Analytical precision (s _r (%), n = 10) was 6% for both elements. Compared with the Standard Methods, APHA, 3114B manual method, the system consumes at least 10 times less sample per determination, and the quantities of acid and reducing agent used are significantly lower with a reduction in the generation of pollutants and waste. As an additional advantage, the system is very fast, efficient and environmentally friendly for monitoring total arsenic and selenium levels in waters.     

Seed trait changes in dispersers' guts and consequences for germination and seedling growth

The effectiveness of a frugivore as a disperser of a plant is greatly determined by how fruits and seeds are handled in its mouth and its digestive tract. Although a number of studies have investigated the effect of avian ingestion on germination, we still know very little about the modifications to seeds during ingestion and the specific consequences on plant fitness. Here we investigate for the first time the different mechanisms by which germination patterns of seeds are modified following ingestion by frugivores. Specifically, we examine changes in seed mass, water content, permeability, seed coat thickness, texture, and resistance in two common Mediterranean fleshy-fruited plants, Phillyrea angustifolia and Myrtus communis, after ingestion by Eurasian Blackbirds, Turdus merula. We found a number of differences between the plant species: Phillyrea seeds lost mass, mainly due to water loss, and had thinner coats after gut passage, but Myrtus seeds did not. Seeds of both species showed increased permeability, while Myrtus seeds in particular became less resistant to breakage. No quantifiable changes in seed coat texture were detected in either species, although this trait was partly associated with differences in germination rate in Phillyrea. High intraspecific plant variation was found for most seed traits measured. Seed passage through birds' guts sped up germination in both species, especially in Myrtus. Increased permeability in seeds of both species following ingestion resulted in a higher germination rate. Moreover, seeds with thick coats (and in the case of Phillyrea, harder coats) germinated at a slower rate and produced seedlings that also grew more slowly, indicating a cost of coat thickness and/or hardness for seedling emergence. Results obtained here contribute to explaining the great heterogeneity in germination responses among and within plant species and the large variety of factors, both intrinsic and extrinsic to the plants, that influence such responses.     

Preparation and characterization of ceramic products by thermal treatment of sewage sludge ashes mixed with different additives

The study of the ceramic characteristics of sludge ashes, alone or mixed with additives (kaolin, montmorillonite, illitic clay, powdered flat glass) includes characterization of additives, preparation of probes (dry or wet mixed), thermal treatment (up to 1200 degrees C, except melting or deformation) and control (densities, compressive strengths and water absorption). Thermal treatment increases the density and compressive strength of probes (both parameters go through maxima, with later decreases) and decreases the absorption of water. The densification is also revealed by the evolution of the ratio of decrease of volume/loss of mass. The maximum values of compressive strengths were obtained for 25% of illitic clay, montmorillonite and glass powder. Densification concerning probes with sludge ashes alone does not occur with kaolin. Experimental data were adjusted to exponential relationships between compressive strengths and densities for every composition, and also to a general equation for all probes. The apparent density obtained was adjusted to a non-linear dependence with temperature, leading to a maximum in density and permitting calculating the temperature of occurrence of this maximum. The adjustment was not possible for probes containing kaolin, requiring presumably higher temperatures to densify. Water absorption has low values for ashes or kaolin probes, intermediate values for illite and powdered flat glass probes and high values for montmorillonite probes. Excepting with kaolin, ceramic materials with better characteristics than sludge ashes without additives were obtained at lower treatment temperatures.     

Influence of RFID tags on recyclability of plastic packaging

The use of Radio Frequency IDentification Technology (RFID) in the packaging sector is an important logistical improvement regarding the advantages offered by this technology in comparison with barcodes. Nevertheless, the presence of these devices in plastic packaging, and consequently in plastic waste, can cause several problems in the recycling plants due to the materials included in these devices.In this study, the mentioned recycling constraints have been experimentally identified in a pilot scale recycling study consisting in three recycling tests with an increasing presence of RFID tags. Differences in each test were evaluated. Furthermore, the quality of the recycled material of each test was studied through the injection and testing of tests probes.The results of the pilot scale recycling tests did not show a decrease in the quality of the recycled plastic due to the presence of RFID tags. Nevertheless, several operational problems during the recycling process were observed such as the obstruction of the screens, which lessened the process yield and created process interruptions, as well as the loss of extruded plastic during the process.These recycling constraints cannot be directly extrapolated to the industrial plants due to the different working scales. Nevertheless, technological solutions are proposed in order to avoid these recycling constraints if they appear.     

Kinetics of photodegradation and ozonation of pentachlorophenol

The oxidation of 2,3,4,5,6-pentachlorophenol (PCP) has been carried out by a photodecomposition process using a polychromatic UV irradiation, and by an ozonation process. In the photodegradation process, the pH accelerated the decomposition rate and the approximate first-order rate constants were evaluated, with values between 0.16+/-0.005 min(-1) at pH=3 and 0.26+/-0.007 min(-1) at pH=9. A more rigorous kinetic study led to the determination of the quantum yields of the reaction, with values of 200+/-7x10(-3) mol/Eins for pH=3 and 22+/-1.1x10(-3) mol/Eins for pH=9. In the ozonation process, the rate constants for the reaction between ozone and PCP were determined by means of a competition kinetics, with values in the range from 0.67x10(5) to 314x10(5) l/mols. The specific rate constants for the un-dissociated and dissociated forms of PCP were also calculated. Finally, in both processes, the intermediate reaction products were identified, the most important being tetrachlorocatechol, tetrachlorohydroquinone and tetra-p-chlorobenzoquinone. Free chloride ion released, which was favored at high pHs, was also followed in both processes.     

Respiratory health assessment and exposure to polycyclic aromatic hydrocarbons in Mexican indigenous population

Environmental Science and Pollution Research - Indoor air pollution is an important risk factor for the generation of lung diseases in developing countries. The indigenous population is...