Pesticide pressure and fish farming in barrage pond in northeastern France. Part III: how management can affect pesticide profiles in edible fish?

Purpose

The quality of fish produced in ponds needs to be ensured. Indeed, pond is often strongly connected to an agricultural watershed, and pesticides are a main health and environmental issue of concern. In this context, the purpose of this study is to highlight the management practices which could impact the pesticide contamination profiles in edible fish and to give recommendations for better practices.

Methods

A principal component analysis, coupled to a hierarchical cluster analysis, was performed to evaluate temporal evolution of contamination profiles and to assess variability among fish species and among sites according to watershed characteristics. The explicative variables correspond to muscular concentrations of pesticides (azoxystrobin, clomazone, diflufenican, carbendazim, isoproturon, metazachlor, napropamid) in three species of fish (Perca fluviatilis, Cyprinus carpio and Rutilus rutilus), caught in five ponds during two sampling campaigns. Management data are added variables in order to discuss about parameters suspected to be implicated in the contamination profiles recorded.

Results

This work shows that high amounts of pesticides applied, short crop rotation durations and bare soil practices led to contamination of sediments and fish and were associated to a “bad” management of watershed. Breeding fish that had low masses and establishing the fishing period at the end of winter seemed to be “bad” management of pond. Aggravating topological parameters were big watershed coupled to small pond and high proportions of sand soils in the watershed.

Conclusions

Reducing amounts of pesticide used (e.g. policy agency plans, farmer acceptance), favouring long-term rotations and inter-cultures, adapting pond creation and fish farming practices to watershed management and topography all could reduce pesticide levels in edible fish and contribute to a better sustainability of the extensive fish farming in pond.     

Mercury human exposure through fish consumption in a reservoir contaminated by a chlor-alkali plant: Babeni reservoir (Romania)

Purpose  

Chlor-alkali plants are one of the most important point sources of mercury to aquatic environment. The problem of Hg contamination has been studied in a region, Rm Valcea (Romania), impacted by the wastewater discharge of a chlor-alkali plant. The purpose of the present study is to evaluate the current status of mercury pollution in the Babeni reservoir (Olt River) and the exposure of local population via fish consumption to mercury originating from the chlor-alkali plant.     

Impact of soil water regime on degradation and plant uptake behaviour of the herbicide isoproturon in different soil types

The environmental fate of the worldwide used herbicide isoproturon was studied in four different, undisturbed lysimeters in the temperate zone of Middle Europe. To exclude climatic effects due to location, soils were collected at different regions in southern Germany and analyzed at a lysimeter station under identical environmental conditions. ¹⁴C-isoproturon mineralization varied between 2.59% and 57.95% in the different soils. Barley plants grown on these lysimeters accumulated ¹⁴C-pesticide residues from soil in partially high amounts and emitted ¹⁴CO₂ in an extent between 2.01% and 13.65% of the applied ¹⁴C-pesticide. Plant uptake and ¹⁴CO₂ emissions from plants were inversely linked to the mineralization of the pesticide in the various soils: High isoproturon mineralization in soil resulted in low plant uptake whereas low isoproturon mineralization in soil resulted in high uptake of isoproturon residues in crop plants and high ¹⁴CO₂ emission from plant surfaces. The soil water regime was identified as an essential factor that regulates degradation and plant uptake of isoproturon whereby the intensity of the impact of this factor is strongly dependent on the soil type.     

Polycyclic aromatic hydrocarbons and hydroxylated metabolites in the muscle tissue of Eurasian perch (Perca fluviatilis) through dietary exposure during a 56-day period

Eurasian perch (Perca fluviatilis) was exposed trophically to phenanthrene, pyrene and benzo[a]pyrene. Accumulation kinetics in the muscle tissue of parent PAHs and hydroxylated metabolites were established for 56 days at 3 levels of exposure (0, 100 and 500 μg/kg BW). Benzo[a]pyrene and 3-hydroxy-benzo[a]pyrene were not detected in the muscles. During exposure, there was an increase in phenanthrene, pyrene and their hydroxylated metabolites in the muscle tissue. Low transfer to muscle tissue was observed at equilibrium for phenanthrene (4.4 ± 0.6% and 2.7 ± 0.8%) and pyrene (1.0 ± 0.2% and 0.33 ± 0.09%), depending on the concentrations in the spiked feed.     

Lead availability and phytoextraction in the rhizosphere of Pelargonium species

Environmental Science and Pollution Research - Availability of lead (Pb) in soil is a major factor controlling the phytoremediation efficiency of plants. This study was focused on investigating the...     

Pedogenesis and nickel biogeochemistry in a typical Albanian ultramafic toposequence

This study aimed at relating the variability of Ni biogeochemistry along the ultramafic toposequence to pedogenesis and soil mineralogy. Hypereutric Cambisols dominate upslope; Cambic Vertisols and Fluvic Cambisols occur downslope. The soil mineralogy showed abundance of primary serpentine all over the sequence. It is predominant upslope but secondary smectites dominate in the Vertisols. Free Fe-oxides are abundant in all soils but slightly more abundant in the upslope soils. Whereas serpentines hold Ni in a similar and restricted range in every soil (approx. 0.3 %), Ni contents in smectites may vary a lot and Mg-rich and Al-poor smectites in the Vertisol could hold up to 4.9 % Ni. Ni was probably adsorbed onto amorphous Fe-oxides and was also exchangeable in secondary smectites. High availability of Ni in soils was confirmed by DTPA extractions. However, it varied significantly along the toposequence, being higher in upslope soils, where Ni-bearing amorphous Fe-oxides were abundant and total organic carbon higher and sensibly lower downslope on the Vertisols: Ni_DTPA varied from 285 mg kg^?1 in the surface of soil I (upslope) to 95.9 mg kg^?1 in the surface of Fluvic Cambisols. Concentration of Ni in Alyssum murale shoots varied from 0.7 % (Hypereutric Cambisols) to 1.4 % (Hypereutric Vertisol). Amazingly, Ni uptake by A. murale was not correlated to Ni_DTPA, suggesting the existence of specific edaphic conditions that affect the ecophysiology of A. murale upslope.     

Process integrated modelling for steelmaking Life Cycle Inventory analysis

During recent years, strict environmental regulations have been implemented by governments for the steelmaking industry in order to reduce their environmental impact. In the frame of the ULCOS project, we have developed a new methodological framework which combines the process integrated modelling approach with Life Cycle Assessment (LCA) method in order to carry out the Life Cycle Inventory of steelmaking. In the current paper, this new concept has been applied to the sinter plant which is the most polluting steelmaking process. It has been shown that this approach is a powerful tool to make the collection of data easier, to save time and to provide reliable information concerning the environmental diagnostic of the steelmaking processes.     

Comparison of DNA extraction methodologies used for assessing fungal diversity via ITS sequencing

Traditional methods of assessing fungal exposure have been confounded by a number of limiting variables. The recent utilization of molecular methods such as internal transcribed spacer (ITS) sequencing of ribosomal RNA genes has provided improved insight into the diversity of fungal bioaerosols in indoor, outdoor and occupational environments. However, ITS analyses may also be confounded by a number of methodological limitations. In this study, we have optimized this technology for use in occupational or environmental studies. Three commonly used DNA extraction methodologies (UltraClean Soil kit, High Pure PCR Template kit, and EluQuik/DNeasy kit) were compared in terms of sensitivity and susceptibility to PCR inhibitors in dust for three common fungal bioaerosols, Aspergillus versicolor, Rhizopus microsporus and Wallemia sebi. Environmental dust samples were then studied using each extraction methodology and results were compared to viable culture data. The extraction methods differed in terms of their ability to efficiently extract DNA from particular species of fungi (e.g. Aspergillus versicolor). In addition, the ability to remove PCR inhibitors from dust samples was most effective using the soil DNA extraction kit. The species composition varied greatly between ITS clone libraries generated with the different DNA extraction kits. However, compared to viable culture data, ITS clone libraries included additional fungal species that are incapable of growth on solid culture medium. Collectively, our data indicated that DNA extraction methodologies used in ITS sequencing studies of occupational or environmental dust samples can greatly influence the fungal species that are detected.