Pedogenesis and nickel biogeochemistry in a typical Albanian ultramafic toposequence

This study aimed at relating the variability of Ni biogeochemistry along the ultramafic toposequence to pedogenesis and soil mineralogy. Hypereutric Cambisols dominate upslope; Cambic Vertisols and Fluvic Cambisols occur downslope. The soil mineralogy showed abundance of primary serpentine all over the sequence. It is predominant upslope but secondary smectites dominate in the Vertisols. Free Fe-oxides are abundant in all soils but slightly more abundant in the upslope soils. Whereas serpentines hold Ni in a similar and restricted range in every soil (approx. 0.3 %), Ni contents in smectites may vary a lot and Mg-rich and Al-poor smectites in the Vertisol could hold up to 4.9 % Ni. Ni was probably adsorbed onto amorphous Fe-oxides and was also exchangeable in secondary smectites. High availability of Ni in soils was confirmed by DTPA extractions. However, it varied significantly along the toposequence, being higher in upslope soils, where Ni-bearing amorphous Fe-oxides were abundant and total organic carbon higher and sensibly lower downslope on the Vertisols: Ni_DTPA varied from 285 mg kg^?1 in the surface of soil I (upslope) to 95.9 mg kg^?1 in the surface of Fluvic Cambisols. Concentration of Ni in Alyssum murale shoots varied from 0.7 % (Hypereutric Cambisols) to 1.4 % (Hypereutric Vertisol). Amazingly, Ni uptake by A. murale was not correlated to Ni_DTPA, suggesting the existence of specific edaphic conditions that affect the ecophysiology of A. murale upslope.     

Process integrated modelling for steelmaking Life Cycle Inventory analysis

During recent years, strict environmental regulations have been implemented by governments for the steelmaking industry in order to reduce their environmental impact. In the frame of the ULCOS project, we have developed a new methodological framework which combines the process integrated modelling approach with Life Cycle Assessment (LCA) method in order to carry out the Life Cycle Inventory of steelmaking. In the current paper, this new concept has been applied to the sinter plant which is the most polluting steelmaking process. It has been shown that this approach is a powerful tool to make the collection of data easier, to save time and to provide reliable information concerning the environmental diagnostic of the steelmaking processes.     

Comparison of DNA extraction methodologies used for assessing fungal diversity via ITS sequencing

Traditional methods of assessing fungal exposure have been confounded by a number of limiting variables. The recent utilization of molecular methods such as internal transcribed spacer (ITS) sequencing of ribosomal RNA genes has provided improved insight into the diversity of fungal bioaerosols in indoor, outdoor and occupational environments. However, ITS analyses may also be confounded by a number of methodological limitations. In this study, we have optimized this technology for use in occupational or environmental studies. Three commonly used DNA extraction methodologies (UltraClean Soil kit, High Pure PCR Template kit, and EluQuik/DNeasy kit) were compared in terms of sensitivity and susceptibility to PCR inhibitors in dust for three common fungal bioaerosols, Aspergillus versicolor, Rhizopus microsporus and Wallemia sebi. Environmental dust samples were then studied using each extraction methodology and results were compared to viable culture data. The extraction methods differed in terms of their ability to efficiently extract DNA from particular species of fungi (e.g. Aspergillus versicolor). In addition, the ability to remove PCR inhibitors from dust samples was most effective using the soil DNA extraction kit. The species composition varied greatly between ITS clone libraries generated with the different DNA extraction kits. However, compared to viable culture data, ITS clone libraries included additional fungal species that are incapable of growth on solid culture medium. Collectively, our data indicated that DNA extraction methodologies used in ITS sequencing studies of occupational or environmental dust samples can greatly influence the fungal species that are detected.     

Environmental evaluation of transfer and treatment of excess pig slurry by life cycle assessment

Slurry management is a central topic in the agronomic and environmental analysis of intensive livestock production systems. The objective of this study is to compare the environmental performance of two scenarios of collective slurry management for the disposal of excess nitrogen from animal manure. The scenarios are the transfer of slurry and its injection to crop land, and the treatment of slurry in a collective biological treatment station. The study is based on a real case in the West of France, where a group of farmers is developing a collective plan for the disposal of almost 7000 m(3) of excess pig slurry. The evaluation is carried out by Life Cycle Assessment, where emissions and resource consumption are quantified and aggregated into four environmental impact categories: eutrophication, acidification, climate change, and non-renewable energy use. Ammonia emitted is the most important contributor to acidification and eutrophication, while methane contributes most to climate change. Both ammonia and methane are mostly emitted during the storage of slurry and, in the case of the treatment scenario, also during composting the solid fraction of the slurry. The two management strategies are similar with respect to climate change, whereas eutrophication and acidification are twice as large for treatment relative to transfer. Electricity needed for the treatment process is the main contributor to non-renewable energy use for the treatment scenario, while the transfer scenario represents a net energy saving, as energy saved by the reduction of mineral fertiliser use more than compensates for the energy needed for transport and injection of slurry. The overall environmental performance of transfer is better than that of treatment, as it involves less acidification, eutrophication and non-renewable energy use. The method employed and the results obtained in this study can provide elements for a transparent discussion of the advantages and disadvantages of contrasting excess slurry management scenarios as well as the identification of the main aspects determining their environmental performance.     

Comparison of several maturity indicators for estimating phytotoxicity in compost-amended soil

Compost can provide a rich organic nutrient source and soil conditioner for agricultural and horticultural applications. Ideal compost amendment rates, however, vary based on starting material and compost maturity or their interaction, and there is little consensus on appropriate methods to gauge maturity. In this study, electrical conductivity, carbon-to-nitrogen ratio, and carbon mineralization measurements were made on compost-amended soils and compared to phytotoxicity measured as cress (Lepidium sativum) germination. Cress germination in soil and compost mixtures incubated for 8-10 days significantly decreased with increasing electrical conductivity and carbon mineralization rate of the mixture and with carbon mineralization rate and mineralizable carbon associated with the compost. Cress germination was not related to carbon-to-nitrogen ratio or pH of soil and compost mixtures. The electrical conductivity of the soil and compost mixtures significantly decreased with decreasing mineralizable carbon suggesting that compounds contributing to electrical conductivity were present in the compost and decomposed upon soil amendment. The results of this study indicate that measurements of mineralizable carbon and mineralization rate of composts in soil, and electrical conductivity and mineralization rate of soil and compost mixtures, can be used as indicators of compost maturity.     

Airborne trace element pollution in 11 European cities assessed by exposure of standardised ryegrass cultures

Within a European biomonitoring programme, Italian ryegrass (Lolium multiflorum Lam.) was employed as accumulative bioindicator of airborne trace elements (As, Cd, Cr, Cu, Fe, Ni, Pb, Sb, V, Zn) in urban agglomerations. Applying a highly standardised method, grass cultures were exposed for consecutive periods of four weeks each to ambient air at up to 100 sites in 11 cities during 2000–2002. Results of the 2001 exposure experiments revealed a clear differentiation of trace element pollution within and among local monitoring networks. Pollution was influenced particularly by traffic emissions. Especially Sb, Pb, Cr, Fe, and Cu exhibited a very uneven distribution within the municipal areas with strong accumulation in plants from traffic-exposed sites in the city centres and close to major roads, and moderate to low levels in plants exposed at suburban or rural sites. Accumulation of Ni and V was influenced by other emission sources. The biomonitoring sites located in Spanish city centres featured a much higher pollution load by trace elements than those in other cities of the network, confirming previously reported findings obtained by chemical analyses of dust deposition and aerosols. At some heavily-trafficked sites, legal thresholds for Cu, Pb, and V contents in foodstuff and animal feed were reached or even surpassed. The study confirmed that the standardised grass exposure is a useful and reliable tool to monitor and to assess environmental levels of potentially toxic compounds of particulate matter.     

Triphenyltin alters lipid homeostasis in females of the ramshorn snail Marisa cornuarietis

Molluscs are sensitive species to the toxic effects of organotin compounds, particularly to masculinisation. Both tributyltin (TBT) and triphenyltin (TPT) have been recently shown to bind to mollusc retinoid X receptor (RXR). If RXR is involved in lipid homeostasis, exposure to TPT would have an immediate effect on endogenous lipids. To test this hypothesis, the ramshorn snail Marisa cornuarietis was exposed to environmentally relevant concentrations of TPT (30, 125, 500 ng/L as Sn) in a semi-static water regime for 7 days. Percentage of lipids and total fatty acid content decreased significantly in TPT-exposed females while the activity of peroxisomal acyl-CoA oxidase, involved in fatty acid catabolism, increased. In addition, fatty acid profiles (carbon chain length and unsaturation degree) were significantly altered in exposed females but not in males. This work highlights the ability of TPT to disrupt lipid metabolism in M. cornuarietis at environmentally realistic concentrations and the higher susceptibility of females in comparison to males.     

Comprehensive primary particulate organic characterization of vehicular exhaust emissions in France

A study to characterize primary particulate matter (PM_2.5 and PM₁₀) from the French vehicular fleet was conducted during winter 2008, in a tunnel in Marseille, France. The carbonaceous fraction represents 70% of the aerosol mass and elemental carbon fraction (EC) represent 60% of the carbonaceous fraction. The organic carbon OC was characterized in term of its water soluble fraction, functionalization rate and HULIS content. Seventy trace organic compounds including alkanes, polycyclic aromatic hydrocarbons (PAH), petroleum biomarkers and carboxylic acids were also quantified, in order to determine an organic emission profile for chemical mass balance modeling studies. Such source profiles were still missing in Europe and particularly in France. The profile obtained in this study is consistent with profiles determined in tunnel or dynamometer studies performed in other countries during the last ten years. These results suggest that organic compounds profiles from vehicular exhaust emissions are not significantly influenced by the geographic area and are thus suitable for use in aerosol source apportionment modeling applied across extensive regions. The chemical profile determined here is very similar to those obtained for diesel emissions with high concentrations of EC relative to OC (EC/OC = 1.8) and low concentrations of the higher molecular weight PAH. These results are consistent with the high proportion of diesel vehicles in the French fleet (49%).     

National contributions to global ecosystem values

Current conservation templates prioritize biogeographic regions with high intensity ecosystem values, such as exceptional species richness or threat. Intensity-based targets are an important consideration in global efforts, but they do not capture all available opportunities to conserve ecosystem values, including those that accrue in low intensity over large areas. We assess six globally-significant ecosystem values—intact wilderness, freshwater availability, productive marine environments, breeding habitat for migratory wildlife, soil carbon storage, and latitudinal potential for range shift in the face of climate change—to highlight opportunities for high-impact broadly-distributed contributions to global conservation. Nations can serve as a cohesive block of policy that can profoundly influence conservation outcomes. Contributions to global ecosystem values that exceed what is predicted by a nation's area alone, can give rise to countries with the capacity to act as ‘conservation superpowers’, such as Canada and Russia. For these conservation superpowers, a relatively small number of national policies can have environmental repercussions for the rest of the world.     

Ocean to continent transfer of atmospheric Se as revealed by epiphytic lichens

There is still a long-term debate concerning the relative contributions of naturally emitted and anthropogenic Se at the regional and local scales. Here, Se and heavy metal concentrations are reported for epiphytic lichens collected in coastal and inland areas from the USA, Canada and France for assessing atmospheric Se source. Correlations found between Se and Cl in lichens confirmed the major marine biogenic source for atmospheric Se. Continental samples do not show systematic relationships between Se and other metal (Pb, Cu, In …) contents, even for lichens collected in the vicinity of smelters or close to urban areas. Our results suggest that, although anthropogenic Se may be present, the marine biogenic Se source is a major contributor to atmospheric Se for our sampling locations. The contribution of naturally emitted atmospheric Se may be significant in urban and industrial areas and should be taken into account for further studies.