Structure dependent induction of CYP1A by polychlorinated biphenyls in hepatocytes of male castrated pigs

Hepatocytes cultures prepared from castrated pig hepatocytes (Great Yorkshire x Dutch Landrace), as a model for human liver, were used to study the effect of twenty polychlorinated biphenyls (PCBs) on CYP1A activity, measured as the dealkylation of either ethoxyresorufin or methoxyresorufin. The selection of the PCBs was based on their differences in physico-chemical properties. The non-ortho and mono-ortho substituted PCBs were the most potent CYP1A inducers in pig hepatocytes. In addition, several multiple-ortho substituted congeners, with five or more chlorine atoms, were inducers of CYP1A activity as well. Their relative effect potencies (REP) were proximately 10,000 times lower than the most potent congener, 3,3',4,4',5 PeCB (PCB#126). Using partial least-squares (PLS) modeling, predictions of CYP1A activity could be made for all tetra to hepta substituted congeners. Several multiple-ortho substituted PCBs, which are highly abundant in the biotic and abiotic environment, have been found to induce CYP1A activity in pig hepatocytes. Because induction of CYP1A activity is used as biomarker for Ah-receptor mediated responses, it is suggested to include these congeners in future risk assessment.     

Low bone density and renal dysfunction following environmental cadmium exposure in China

This paper presents the main findings of a study on health effects of environmental cadmium pollution in China, performed in 1998, i.e. approximately 25 years after the first warnings of such effects were published in Ambio. Forearm bone mineral density (BMD) and renal dysfunction were assessed in population groups exposed to cadmium via rice. Decreased BMD was found in postmenopausal women with elevated urinary cadmium (CdU) or cadmium in blood (CdB) and among men with elevated CdB. Also, clear and statistically significant dose-effect and dose-response relationships were found between CdB or CdU and renal dysfunction (increased excretion of retinol-binding protein). This is the first report of bone effects among Cd-exposed population groups in Asia outside Japan. The report is also of interest since it demonstrates that bone effects, a comparatively severe adverse health effect of Cd, in combination with renal dysfunction, still occurs in environmentally exposed population groups in Asia. Recent reports on bone effects in Cd-exposed population groups in Europe are discussed.     

Measuring the effect of photocatalytic purifiers on indoor air hydrocarbons and carbonyl pollutants

Laboratory tests of photocatalytic air purifiers are usually performed with a single pollutant, in the parts per million by volume domain and at airflow rates < or =0.1 m3/hr. Clearly, it is necessary to probe photocatalytic materials and apparatuses under real conditions or conditions closely mimicking reality. Photocatalytic prototypes were placed in an ordinary room. To collect hydrocarbons over a shorter period (15 min) than with adsorbent-containing cartridges, solid-phase microextraction (SPME) was used. Typically, concentrations in substituted benzene hydrocarbons and tetrachloroethene were decreased to 20-35% of initial values; toluene and m- + p-xylene concentrations dropped to 2-6 parts per billion by volume, and o-xylene and benzene concentrations were still lower. In the absence of appropriate, commercialized SPME fibers, carbonyl compounds (both formed and destroyed by photocatalysis) were extracted using cartridges containing 2,4- dinitrophenylhydrazine-coated silica. The concentration ranges (in parts per billion by volume) were shifted to higher values in treated air: from 9-15.5 to 12.5-18 for methanal, from 1.5-3 to 8-11.5 for ethanal, and from 4.5-19 to 8-26.5 for propanone with the prototype used; these unprecedented results do not exclude using photocatalysis to treat air, but they illustrate that improvement is needed. Because these tests are time-consuming, preliminary tests are useful; results obtained with a 225-L closed-loop, airtight, photocatalytic reactor with an external turbine enabling the ambient air inside the reactor to be circulated through the purifier device at 15-450 m3/hr flow rates are reported.     

Stimulation of reductive dechlorination of hexachlorobenzene in soil by inducing the native microbial activity

The reductive dechlorination and behaviour of ¹⁴C-hexachlorobenzene (HCB) was investigated in an arable soil. The activity of the native anaerobic microbial communities could be induced by saturating the soil with water. Under these conditions high rates of dechlorination were observed. After 20 weeks of incubation only 1% of the applied ¹⁴C-HCB could be detected in the fraction of extractable residues. Additional organic substances, like wheat straw and lucerne straw, however considerably delayed and reduced the dechlorination process in the soil. The decline of HCB was not only caused by dechlorination but also by the formation of non-extractable residues, whereby their amounts varied with time depending on the experimental conditions. Several dechlorination products were detected, indicating the following main HCB transformation pathway: HCB → PCB → 1,2,3,5-TeCB → 1,3,5-TCB → 1,3-DCB, with 1,3,5-TCB as main intermediate dechlorination product. The other TeCB-, TCB- and DCB-isomers were also detected in low amounts, showing the presence of more than one dechlorination pathway. Since the methane production rates were lowest when the dechlorination rates were highest, it can be assumed that methanogenic bacteria were not involved in the dechlorination process of HCB. The established ¹⁴C-mass balances show, that with increasing dechlorination and incubation times, the ¹⁴C-recoveries decreased.     

Development of emission factors for polycarbonate processing

Emission factors for selected volatile organic compounds (VOCs) and particulate emissions were developed while processing eight commercial grades of polycarbonate (PC) and one grade of a PC/acrylonitrile-butadiene-styrene (ABS) blend. A small commercial-type extruder was used, and the extrusion temperature was held constant at 304 degrees C. An emission factor was calculated for each substance measured and is reported as pounds released to the atmosphere/million pounds of polymer resin processed [ppm (wt/wt)]. Scaled to production volumes, these emission factors can be used by processors to estimate emission quantities from similar PC processing operations.     

Activity patterns in the terebellid polychaete <Emphasis Type="Italic">Eupolymnia nebulosa</Emphasis> assessed using a new image analysis system

The activity and surface sediment displacement by the terebellid polychaete Eupolymnia nebulosa were monitored, using new image acquisition and image analysis procedures. We used a video sensor mounted on a motorized table, to acquire adjacent images of the whole studied aquarium within about 2 s. These images were then grouped within a composite image acquired every 15 s. Consecutive composite images were compared to infer activity and surface sediment displacement. This procedure proved efficient for E. nebulosa as indicated by (1) the continuity of the tentacles within composite images, and (2) the direct comparison of images and detected activities. There were important temporal changes in the relative importance of the three main types of activity: feeding, tube-building and (both partial and total) emergence from the tube, accounting, respectively, for 75, 15 and 10% of the entire experiment duration. Activity intensity (cm² min^-1) was assessed through the surface of pixels with grey levels differing by more than 20 (on a 0–255 scale) between two consecutive images. Feeding was associated with low activity intensity, whereas tube-building and emergence from the tubes were associated with high activity intensities. Surface sediment displacement mostly resulted from tentacle activity both during feeding and tube-building and was almost zero when worms emerged from their tube. We used our experimental set up to assess spatial changes in activity intensity and particle displacements along the tentacles. Most of the activity occurred within the first 4–6 cm from the tube aperture. Particle loss during their transfer along the tentacles preferentially affected larger particles as postulated by the model of particle selection and transport in tentaculate deposit-feeders. Moreover, the speed of the particles along the tentacles correlated negatively with their size. This contributed to increase in the residence time of larger particles on the tentacles and thus, to further enhance their probability of being lost. The size distributions of particles during feeding and tube-building did not differ significantly although visual observations confirmed the preferential use of larger particles for tube-building. This suggests the existence of a sorting step occurring elsewhere than on the tentacles as already demonstrated for spionid polychaetes.     

Environmental Cleanliness as a Public Good: Welfare and Policy Implications of Nonconvex Preferences

This paper explores the implications of a form of nonconvexity in individual preferences over the public good “cleanliness.” The implications of this nonconvexity on equilibrium outcomes, welfare analysis, the process of development, and optimal government policy are examined. The nonconvexity can imply a role for government in providing a commitment to a clean environment even if the government has a cost disadvantage in cleaning compared with individuals. By providing a credible commitment to a clean environment the government can induce private individuals to undertake optimal levels of cleaning on their own.     

Environmental auditing at the crossroads: The environmental auditing roundtable's response to ISO 14000

The Environmental Auditing Roundtable (EAR) is the single largest professional organization in the world, representing over 900 members. Built on a tradition of promoting environmental auditing through openly sharing experiences in the field of safety, health, and environmental auditing, the organization in recent years has significantly expanded its influence on auditing practices both nationally and internationally by monitoring audit activities and participating in the development of audit policy, regulation, standardization, and the certification of environmental auditors. This article describes the origin and evolution of the organization from meeting the needs of the membership to addressing the needs of external national and international stakeholders.