Comparison of periphytic biofilm and filter-feeding bivalve metal bioaccumulation (Cd and Zn) to monitor hydrosystem restoration after industrial remediation: a year of biomonitoring

Despite a significant decrease in the metallic waste emissions from an industrial site and a remediation process initiated in 2007, the Riou-Mort watershed (southwest France) still exhibits high Cd and Zn concentrations. Metal wastes have long been proven to significantly disturb aquatic communities. In this study, bioaccumulation capacities and responses to the chemical improvement of the hydrosystem were assessed for a year along the contamination gradient through the comparison of two biological models: Corbicula fluminea and periphytic biofilms, both considered as good bioindicators. Bioaccumulation results confirmed the persistence of water contamination in Corbicula fluminea and biofilms with, respectively, maximum Cd concentrations reaching 80.6 and 861.2 μg gDW(-1), and Zn concentrations 2.0 and 21.3 mg gDW(-1). Biofilms exhibited bioaccumulation in close correlation with water contamination, while Corbicula fluminea presented Cd bioaccumulation clearly regulated by water temperature and metal concentrations, affecting the ventilatory activity, as revealed by condition indices measurements. Also, a linear regression using Cd bioaccumulation and temperature () showed that below approximately 6 °C Corbicula fluminea did not appear to accumulate metals. Bioconcentration factors (BCFs) were higher in biofilms in comparison with Corbicula fluminea and showed the great accumulation capacity of suspended particulate matter in biofilms. However, bioaccumulation capacities are known to be influenced by many factors other than metal concentrations, such as temperature, water oxygenation or plankton and nutrient concentrations. Thus, this study demonstrates the power of a combined assessment using both Corbicula fluminea and biofilms as bioindicators to give a more integrated view of water quality assessment. Finally, when comparing our results with previous studies, the start of hydrosystem restoration could be shown by decreasing bioaccumulation in organisms.     

Colloidal mobilization from soil and transport of uranium in (sub)-surface waters

An analytical methodology was developed to characterize the colloidal distribution of trace elements of interest in environmental waters sampled in a same site and enables the different colloidal distributions from waters to be compared. The purpose was to provide consistent information related to the origin and nature of colloids responsible for the transport of trace element(s). The work was motivated by the observed enhanced mobility of uranium in soil. The colloidal size continuum was investigated by a multi-technique approach involving asymmetric flow field-flow fractionation (AF4) coupled with ultraviolet spectroscopy (UV), multi angle light scattering (MALS), and atomic mass spectrometry (ICPMS). To take into consideration the size and shape variability specific to each sample, the size distributions were established from the gyration radii measured from MALS, also considering the size information from standard nanospheres fractionated by AF4. A new parameter called “shape index” was proposed. It expresses the difference in hydrodynamic behavior between analytes and spherical particles taken as reference. Under AF4 diffusion conditions, it can be considered as an evaluator of the deviation from the sphericity of the fractionated analytes. AF4-UV-MALS-ICPMS enabled the dimensional and chemical characteristics of the colloidal size continuum to be obtained. As a “proof of concept”, the developed methodology was applied at a field scale, in a reference study site. In order to have a “dynamic understanding”, the investigation was based on the joint characterization of colloids from surface waters and soil leachates from static and dynamic processes. In the water samples of the study site, the continuum of gyration radius ranged from a few nanometers up to 200 nm. Colloids containing iron, aluminum, and organic carbon were involved in the uranium transport in the soil column and surface waters. The colloidal uranium concentration in the surface water increased from the upstream location (approximately 13 ng (U) L^?1) to the downstream location (approximately 60 ng (U) L^?1).

     

Determination of toxic metals in leather by wavelength dispersive X-ray fluorescence (WDXRF) and inductively coupled plasma optical emission spectrometry (ICP OES) with emphasis on chromium

The tanning industry is one of the largest environmental polluters due to high generation waste in all production processes, but the tanning is particularly worrisome due to the use of significant amounts of chromium. Cr is an element potentially toxic to both health and the environment, depending on the concentration and the oxidation state. Cr(VI) can come in contact with human skin when using leather goods, which can cause allergies and dermatitis, besides being carcinogenic. Considering that approximately 90% of the world production of leather is performed with Cr salts, the determination of this element in leather is necessary to avoid exposure to the risks that the element can provide. The main goal of this study was the development of an alternative analytical method for the determination of Cr in leathers (ovine and bovine leather tanned with Cr and vegetable tannin) using wavelength dispersive X-ray fluorescence (WDXRF) for direct solid analysis. Besides performing analysis of the chemical composition and determination of Al, As, Ba, Ca, Cd, Cr, Cu, Fe, Mg, Ni, Pb, Sb, Sr, Ti, and Zn in leather by inductively coupled plasma optical emission spectrometry (ICP OES). Principal component analysis (PCA) was also used in the evaluation of the WDXRF and ICP OES data sets. WDXRF calibration models for Cr presented satisfactory figures of merit and the analysis of the leathers revealed an alarming concentration of total Cr in the samples reaching 21,353 mg kg^?1.     

Effects of nanoparticles in species of aquaculture interest

Recently, it was observed that there is an increasing application of nanoparticles (NPs) in aquaculture. Manufacturers are trying to use nano-based tools to remove the barriers about waterborne food, growth, reproduction, and culturing of species, their health, and water treatment in order to increase aquaculture production rates, being the safe-by-design approach still unapplied. We reviewed the applications of NPs in aquaculture evidencing that the way NPs are applied can be very different: some are direclty added to feed, other to water media or in aquaculture facilities. Traditional toxicity data cannot be easily used to infer on aquaculture mainly considering short-term exposure scenarios, underestimating the potential exposure of aquacultured species. The main outputs are (i) biological models are not recurrent, and in the case, testing protocols are frequently different; (ii) most data derived from toxicity studies are not specifically designed on aquaculture needs, thus contact time, exposure concentrations, and other ancillary conditions do not meet the required standard for aquaculture; (iii) short-term exposure periods are investigated mainly on species of indirect aquaculture interest, while shrimp and fish as final consumers in aquaculture plants are underinvestigated (scarce or unknown data on trophic chain transfer of NPs): little information is available about the amount of NPs accumulated within marketed organisms; (iv) how NPs present in the packaging of aquacultured products can affect their quality remained substantially unexplored. NPs in aquaculture are a challenging topic that must be developed in the near future to assure human health and environmental safety.

Open image in new window

Graphical abstract ?

     

Adsorption mechanism of chromium(III) using biosorbents of Jatropha curcas L.

Environmental Science and Pollution Research - The removal of Cr3+ from water solutions by biosorbents from the rind, endosperm, and endosperm + episperm of the Jatropha curcas was evaluated....     

Quality of Shallow Groundwater and Drainage Water in Irrigated Agricultural Lands in A Mediterranean Coastal Region of Turkey

Spatial and seasonal differences in water quality of drainage water and unconfined shallow groundwater were related to irrigation in Samandağ, a Mediterranean coastal region. Eighteen wells, seven drainage points and Orontes River were monitored bimonthly for one year for analyses of electrical conductivity (EC), total dissolved solids (TDS), sodium adsorption ratio (SAR), cations (Na, K, Ca + Mg) and anions (CO₃, HCO₃, Cl and SO₄). Agricultural irrigation using saline groundwater decreased water quality of Orontes River during the irrigation season (May to September) more than during the non-irrigation season (October to April). Seasonal fluctuations in water quality of shallow groundwater were greater during the irrigation season than the non-irrigation season in the study area. Excessive use of groundwater resulted in a decline in the water table levels in the irrigation season. Water table level rose up to the soil surface in areas where there was a lack of drainage or poor drainage, due to the impact of precipitation in the winter. SAR and pH values of drainage water increased in the irrigation season, while the other properties of drainage water decreased. Irrigation water quality of Orontes River was classified as C₃S₁ in both seasons. Irrigation water quality of shallow groundwater and drainage water varied from C₂S₁ to C₄S₂ in one year. Drainage and well waters were found to be different on yearly basis in terms of Na, SAR (p<0.01) and Ca + Mg concentrations (p<0.001). Ca + Mg concentrations for both sources were different for all sampling dates (p<0.001).     

Material conversion from used oil sorbents by pyrolysis

Journal of Material Cycles and Waste Management - A lab-prepared cellulosic oil sorbent—used for oil spill cleanup—was pyrolyzed in a quartz, pipe-type horizontal furnace at different...     

Plant uptake of radiocaesium from artificially contaminated soil monoliths covering major European soil types

Uptake of ¹³⁷Cs was measured in different agricultural plant species (beans, lettuce, barley and ryegrass) grown in 5 undisturbed soil monoliths covering major European soil types. The first cultivation was made three years after soil contamination and plants were grown during 3 successive years. The plant–soil ¹³⁷Cs transfer factors varied maximally 12-fold among soils and 35-fold among species when grown on the same soil. Single correlations between transfer factors and soil properties were found, but they varied widely with plant type and can hardly be used as a predictive tool because of the few soils used. The variation of ¹³⁷Cs concentrations in plants among soils was related to differences in soil solution ¹³⁷Cs and K concentrations, consistent with previous observations in hydroponics and pot trials. Absolute values of transfer factors could not be predicted based on a model validated for pot trials. The ¹³⁷Cs activity concentration in soil solution decreased significantly (11- to 250-fold) for most soils in the 1997–1999 period and is partly explained by decreasing K in soil solution. Transfer factors of lettuce showed both increasing and decreasing trends between 2 consecutive years depending on soil type. The trends could be explained by the variation in ¹³⁷Cs and K concentrations in soil solution. It is concluded that differences in ¹³⁷Cs transfer factors among soils and trends in transfer factors as a function of time can be explained from soil solution composition, as shown previously for pot trials, although absolute values of transfer factors could not be predicted.     

Exploring management strategies for community-based forests using multi-agent systems: A case study in Palawan, Philippines

This paper describes the experiences and lessons learned in applying a multi-agent systems (MAS) model to study the dynamics and complex interactions among stakeholders in the management of community-based forests. The MAS model is developed using the companion modelling (ComMod) approach, which allows for a collaborative development of the model between the stakeholders and researchers. This approach involves the development and application of role-playing games (RPGs) and computer simulation as learning tools and to validate the model. Inferences are drawn from the learning and negotiation processes that the stakeholders and researchers underwent in the collaborative development of the MAS model. These processes ultimately led to the development of a collaborative resource management plan. The approach and the MAS model were applied to a case study involving a community-based forest managed by three villages in the island of Palawan, Philippines.     

Heavy metal pollution in surface sediment and mussel samples in the Gulf of Gemlik

Different sources of pollution in Karasu Creek were investigated to obtain the water quality and ratio of contamination in this region. To achieve the main objectives of the present study, water samples were collected from Karasu Creek, starting from flow pattern at the upstream site of Akkaya Dam to the end of the dam, crossing the place where the Creek drains into. Dissolved oxygen, electrical conductivity, temperature and maximum/minimum pH were measured systematically for 12 months in the stations, where the water samples were collected. Chemical analyses of the water samples were carried out by using Cadas 50 S brand UV spectrometer to find out the Pb, Fe, Cu, Zn, Ni, Cr, Cd, S, F and Cn concentrations. These concentration were determined in μg/lt as 80–850; 180–4,920; 10–6,100; 440–25,530; 130–2,400; 120–280; 20–150; 214,250–1,113,580; 1,560–4,270 and 40–690, respectively. To determine metal levels of the water samples, multivariate analyses (element coefficient correlation, coefficient correlation dendrogram, hierarchical cluster analysis dendrogram, model summary and ANOVA) were used. The analyses yielded highly accurate results. There were positive correlations between some elements and their possible sources were the same. The stations which resembled each other along the creek were divided into three groups. The water quality of the creek was low and had toxic qualities. Eutrophication developed in Akkaya Dam along the creek. The source of pollution was thought to be industrial and residential wastes. Absolute (0–100 m), short distance (100–500 m) and medium distance (500–2,000 m) conservation areas should be determined in pollution areas along Karasu Creek and they should be improved.