Effect of cropping and tillage on the dissipation of PAH contamination in soil

This study examined the effect of regular tillage and cropping on the dissipation rate of PAHs in contaminated soil. Lysimeters were placed under natural climatic conditions for 2 years and designed to measure the concentration of PAHs in soil and leachates and their toxicity. The soil initially contained 2077 microg PAHs g(-1). The largest decrease in PAHs concentration occurred during the first 6 months. No further significant decrease was observed after this time. The surface soil layer always contained significantly less PAHs than the deeper layer, regardless of the treatments. Less than 8.4 x 10(-8)% of the PAH initially present in the soil (e.g. less or equal to 33 microg PAHs per lysimeter) were leached from the soils during the experiment and the leachates presented no toxicity (as measured by the Microtox test). The toxicity of the soils decreased with time and was significantly lower on the cropped soil compared to the other treatments, despite the residual concentration of PAHs being the highest in this soil. This study demonstrated that the dissipation rates of PAHs were slow after using natural attenuation even when tillage and cropping were performed at the soil surface.     

Stable isotopes (δ13C, δ15N) and modelling as tools to estimate the trophic ecology of cultivated oysters in two contrasting environments

Food sources for cultivated marine bivalves generally are not well identified, although they are essential for a better understanding of coastal ecosystems and for the sustainability of shellfish farming activities. In addition to phytoplankton, other organic matter sources (OMS), such as microphytobenthos and detritus (of terrestrial or marine origins), can contribute significantly to the growth of marine bivalves. The aim of this study was to identify the potential food sources and to estimate their contributions to the growth of the Pacific oyster (Crassostrea gigas) in two contrasting trophic environments of Normandy (France): the Baie des Veys (BDV) and the Lingreville area (LIN). Two sites were studied in the BDV area (BDV-S and BDV-N) and one in the LIN area. To estimate the contribution of each type of OMS, we used a combination of stable natural isotope composition (δ¹³C, δ¹⁵N) analysis of OMS and oyster tissue together with a modelling exercise. Field sampling was conducted every 2 months over 1 year. The sampled sources were suspended particulate organic matter from marine (PhyOM) and terrestrial (TOM) origins, microphytobenthos (MPB), detrital organic matter from the superficial sediment (SOM), and macroalgae (Ulva sp., ULV). A statistical mixing model coupled to a bioenergetic model was used to calculate the contributions of each different source at different seasons. Results showed that isotopic composition of the animal flesh varied with respect to the potential OMS over the year within each ecosystem. Significant differences were also observed among the three locations. For instance, the δ¹³C and δ¹⁵N values of the oysters ranged from −20.0 to −19.1‰ and from 6.9 to 10.8‰ at BDV-S, from −19.4 to −18.1‰ and from 6.4 to 10.0‰ at BDV-N, and from −21.8 to −19.4‰ and from 6.3 to 8.3‰ at LIN. The contributions of the different sources to oyster growth differed depending on the ecosystem and on the period of the year. Phytoplankton (PhyOM) predominated as the principal food source for oysters (particularly in the LIN location). MPB, TOM, and ULV detritus also possibly contributed to oysters’ diet during summer and autumn at the BDV-S and BDV-N sites. SOM was not considered an OMS because it was already a mix of the other four OMS, but rather a trophic reservoir that potentially mirrored the trophic functioning of marine ecosystems.     

42nd Congress of the “Groupe Français des Pesticides” (French Group of Pesticide research–GFP 2012)

The 42nd congress of the “Groupe Français des Pesticides” (French Group of Pesticide research–GFP 2012) took place 30 May–1 June at the “École Nationale Supérieure d’Ingénieurs de Poitiers” (ENSIP), a French generalist engineering grande école in Poitiers. Its focus is on the protection of the environment and is part of the University of Poitiers, one of the oldest universities in Europe. GFP is an annual conference where the latest developments in the field of pesticide research are presented. The topics most commonly discussed mainly concern environmental quality, monitoring, fate, and transfer of pesticides in the environment or risks associated with use of pesticides, but every year a key theme sets the tone. For this 42nd edition, the theme “Innovative strategies for plant protection” was retained.     

Using the soil and water assessment tool to estimate achievable water quality targets through implementation of beneficial management practices in an agricultural watershed

Runoff from crop production in agricultural watersheds can cause widespread soil loss and degradation of surface water quality. Beneficial management practices (BMPs) for soil conservation are often implemented as remedial measures because BMPs can reduce soil erosion and improve water quality. However, the efficacy of BMPs may be unknown because it can be affected by many factors, such as farming practices, land-use, soil type, topography, and climatic conditions. As such, it is difficult to estimate the impacts of BMPs on water quality through field experiments alone. In this research, the Soil and Water Assessment Tool was used to estimate achievable performance targets of water quality indicators (sediment and soluble P loadings) after implementation of combinations of selected BMPs in the Black Brook Watershed in northwestern New Brunswick, Canada. Four commonly used BMPs (flow diversion terraces [FDTs], fertilizer reductions, tillage methods, and crop rotations), were considered individually and in different combinations. At the watershed level, the best achievable sediment loading was 1.9 t ha(-1) yr(-1) (89% reduction compared with default scenario), with a BMP combination of crop rotation, FDT, and no-till. The best achievable soluble P loading was 0.5 kg ha(-1) yr(-1) (62% reduction), with a BMP combination of crop rotation and FDT and fertilizer reduction. Targets estimated through nonpoint source water quality modeling can be used to evaluate BMP implementation initiatives and provide milestones for the rehabilitation of streams and rivers in agricultural regions.     

Comparisons of EPA Rollback,Empirical/Kinetic,and Physicochemical Oxidant Prediction Relationships in the San Francisco Bay Area

This paper describes, compares and evaluates selected Oxidant Prediction Relationships {OPRs) in terms of projections of hydrocarbon emission reductions required for attainment of the former 0.08 ppm standard and the new 0.12 ppm standard in the San Francisco Bay Area in 1985. The OPRs analyzed are the LIRAQ physicochemical model, EPA’s Empirical Kinetic Modeling Approach (EKMA), linear and Appendix J rollback, and an empirical OPR based on local observations.

LIRAQ simulations indicated that to achieve the 0.12 ppm ozone standard, 1985 hydrocarbon emissions must be reduced by 27% from projected levels. The equivalent reductions derived from simple linear rollback, linear rollback with 0.04 ppm background, and the local empirical OPR were 32%, 45% and 37%, respectively. The LIRAQ simulations also showed that reduction of both hydrocarbon and NO_x emissions is less effective than reduction of hydrocarbons only. The attempt to apply EKMA failed because the Bay Area’s low hydrocarbon/NO_x ratios and observed ozone levels are not consistent with the standard EKMA isopleth curves.

For planning, proper OPR selection is important because the wide range in the projections of various OPRs translates into a correspondingly wide range in control costs. Physicochemical OPRs are preferred because they are verifiable; they account for complex topography, meteorology, and source distributions; and because they can treat a variety of control strategies. In the future, the uncertainties associated with the projections can be resolved by assessing trends in air quality on a regular basis and by upgrading and reapplying the prediction methodologies as new information becomes available.     

Mitigation effects of silicon rich amendments on heavy metal accumulation in rice (Oryza sativa L.) planted on multi-metal contaminated acidic soil

The mechanisms of stabilization by silicon-rich amendments of cadmium, zinc, copper and lead in a multi-metal contaminated acidic soil and the mitigation of metal accumulation in rice were investigated in this study. The results from a pot experiment indicated that the application of fly ash (20 and 40 g kg⁻¹) and steel slag (3 and 6 g kg⁻¹) increased soil pH from 4.0 to 5.0-6.4, decreased the phytoavailability of heavy metals by at least 60%, and further suppressed metal uptake by rice. Diffusion gradient in thin-film measurement showed the heavy metal diffusion fluxes from soil to solution decreased by greater than 84% after remediation. X-ray diffraction analysis indicated the mobile metals were mainly deposited as their silicates, phosphates and hydroxides in amended treatments. Moreover, it was found metal translocation from stem to leaf was dramatically restrained by adding amendments, which might be due to the increase of silicon concentration and co-precipitation with heavy metals in stem. Finally, a field experiment showed the trace element concentrations in polished rice treated with amendments complied with the food safety standards of China. These results demonstrated fly ash and steel slag could be effective in mitigating heavy metal accumulation in rice grown on multi-metal contaminated acidic soils.     

Ocean acidification and temperature rise: effects on calcification during early development of the cuttlefish Sepia officinalis

This study investigated the effects of seawater pH (i.e., 8.10, 7.85 and 7.60) and temperature (16 and 19 °C) on (a) the abiotic conditions in the fluid surrounding the embryo (viz. the perivitelline fluid), (b) growth, development and (c) cuttlebone calcification of embryonic and juvenile stages of the cephalopod Sepia officinalis. Egg swelling increased in response to acidification or warming, leading to an increase in egg surface while the interactive effects suggested a limited plasticity of the swelling modulation. Embryos experienced elevated pCO₂ conditions in the perivitelline fluid (>3-fold higher pCO₂ than that of ambient seawater), rendering the medium under-saturated even under ambient conditions. The growth of both embryos and juveniles was unaffected by pH, whereas ⁴⁵Ca incorporation in cuttlebone increased significantly with decreasing pH at both temperatures. This phenomenon of hypercalcification is limited to only a number of animals but does not guarantee functional performance and calls for better mechanistic understanding of calcification processes.     

Pedestrian fatality and impact speed squared: Cloglog modeling from French national data

Objective: The present study estimates pedestrians' risk of death according to impact speed when hit by a passenger car in a frontal collision.

Methods: Data were coded for all fatal crashes in France in 2011 and for a random sample of 1/20th of all road injuries for the same year and weighted to take into account police underreporting of mild injury. A cloglog model was used to optimize risk adjustment for high collision speeds. The fit of the model on the data was also improved by using the square of the impact speed, which best matches the energy dissipated in the collision.

Results: Modeling clearly demonstrated that the risk of death was very close to 1 when impact speeds exceeded 80 km/h. For speeds less than 40 km/h, because data representative of all crashes resulting in injury were used, the estimated risk of death was fairly low. However, although the curve seemed deceptively flat below 50 km/h, the risk of death in fact rose 2-fold between 30 and 40 km/h and 6-fold between 30 and 50 km/h. For any given speed, the risk of death was much higher for more elderly subjects, especially those over 75 years of age. These results concern frontal crashes involving a passenger car. Collisions involving trucks are far less frequent, but half result in the pedestrian being run over, incurring greater mortality.

Conclusions: For impact speeds below 60 km/h, the shape of the curve relating probability of death to impact speed was very similar to those reported in recent rigorous studies. For higher impact speeds, the present model allows the curve to rise ever more steeply, giving a much better fit to observed data. The present results confirm that, when a pedestrian is struck by a car, impact speed is a major risk factor, thus providing a supplementary argument for strict speed limits in areas where pedestrians are highly exposed.     

Coupling occurs before breakdown during biotransformation of Acid Blue 62 by white rot fungi

Only few data exist on the metabolites produced during the biotransformation of anthraquinonic dyes by white rot fungi (WRF). During the biotransformation of an anthraquinonic dye Acid Blue 62 (ABu62) using Pycnoporus sanguineus MUCL 41582 strain, it was previously demonstrated that the blue colour of the medium turned to red before complete dye decolourisation. To better understand the phenomenon, this study carried out ABu62 biotransformation with five different WRF strains (Coriolopsis polyzona MUCL 38443, Perenniporia ochroleuca MUCL 41114, Perenniporia tephropora MUCL 41562, P. sanguineus MUCL 38531 and Trametes versicolor MUCL 38412) and compared with P. sanguineus MUCL 41582 previously described. A multi-methodological approach (using capillary electrophoresis, mass spectrometry, HPLC, UV, NMR and IR spectroscopies) was developed to characterise the metabolites involved and monitor their apparition. Seven metabolites were commonly found with all strains, suggesting a common metabolic pathway for ABu62 biotransformation. During the first days, dimer and oligomers of the initial ABu62 molecule were observed: the main one absorbed in the 500nm region, explaining the red colour appearance of the medium. This main metabolite was made up of two molecules of ABu62 linked by an azo bond, minus a cyclohexyl moiety. After a longer incubation time, breakdown products were observed. Based on these products characterizations, a bioconversion pathway was proposed.