The effects of scale and spatial heterogeneities on diffusion in volcanic breccias and basalts: Amchitka Island, Alaska

Knowledge of the factors that influence the diffusion of contaminants, such as the diffusivity and the connected porosity, is crucial to modeling the long-term fate and transport of contaminants in subsurface systems with small or negligible advective flow, such as in fractured crystalline rock. Fractured rock is naturally heterogeneous, and hence, understanding the diffusivity of a molecule through this material (or the formation factor of the medium) becomes a complex problem, with critical concerns about the scale of laboratory measurements and about the spatial variability of these measurements relative to the scale needed for fate and transport modeling. This study employed both electrical and tracer-based laboratory methods to investigate the effects of scale and pore system connectivity on the diffusivity for volcanic matrix rock derived from the study site, a former underground nuclear test site at Amchitka Island, Alaska. The results of these investigations indicate a relatively well-connected pore system with scale effects generally limited to approximately 6 cm lengths and well-correlated to observed heterogeneous features. An important conclusion resulting from this study, however, is that there is a potential for the estimated diffusivity to be misrepresented by an order of magnitude if multiple samples or longer sample lengths are not used. Given the relatively large number of measurements resulting from these investigations, an analysis of the probability density function (PDF) of the diffusivity was possible. The PDF of the diffusivity was shown to generally follow a normal distribution for individual geologic layers. However, when all of the geologic layers are considered together, the distribution of the subsurface as a whole was shown to follow a lognormal distribution due to the order of magnitude differences amongst the layers. An understanding of these distributions is essential for future stochastic modeling efforts.     

Epiphytische Flechten im Wandel von Immissionen und Klima ? Ergebnisse einer Vergleichskartierung 1989/2007 in Nordwestdeutschland

Zusammenfassung   Hintergrund, Ziel und Zweck Borkenbewohnende (epiphytische) Flechten reagieren sehr empfindlich auf verschiedene Umwelteinflüsse wie Stoffgehalte in der Atmosph?re und Temperaturen. Sie haben als Bioindikatoren für Luftverunreinigungen einen hohen Stellenwert bei Umweltuntersuchungen. Basierend auf einer 1989 durchgeführten Kartierung borkenbewohnender (epiphytischer) Flechten in einem landwirtschaftlich intensiv genutzten Raum Nordwestdeutschlands erfolgte 2007 eine Wiederholungsuntersuchung. Dabei galt es, m?gliche Ver?nderungen der Immissionssituation und des Klimas zu erkennen. Material und Methoden Die Studie basiert auf einer vergleichenden Kartierung epiphytischer Flechten von 355 Tr?gerb?umen an 45 Monitoringpunkten. Die angewandte Methode orientiert sich an der 1989 angewandten halb-quantitativen Erfassung. Ergebnisse Es stellten sich gravierende Ver?nderungen in der Vegetation rindenbewohnender Flechten heraus. Insgesamt war eine Erh?hung der Artenzahl an nahezu allen Monitoringpunkten festzustellen. Es wurde eine sehr starke Abnahme s?uretoleranter Arten und eine deutliche Zunahme basen- und n?hrstofffordernder Flechtenarten festgestellt. Darüber hinaus zeigte sich eine deutliche Zunahme w?rmeliebender Flechtenarten mit einem Verbreitungsschwerpunkt in Südeuropa bei gleichzeitigem Rückgang von Arten mit einem boreal-montanem Verbreitungsschwerpunkt. Diskussion Die festgestellte Entwicklung steht im Einklang mit überregionalen Beobachtungen. Sie wird im Wesentlichen auf eine gro?r?umig ver?nderte Immissionssituation, d. h. einer Abnahme der atmosph?rischen SO₂-Belastung und Zunahme der Ammoniakbelastung zurückgeführt. Ebenso treten deutliche Auswirkungen der Klimaerw?rmung hervor. Schlussfolgerungen Mit relativ geringem Untersuchungsaufwand lie?en sich Ver?nderungen bei den epiphytischen Flechten in den letzten 18 Jahren aufzeigen. Diese sind relevant für die Beurteilung regional und kleinr?umig ver?nderter Umweltbedingungen, die auch für andere Organismen und ?kosysteme l?ngerfristig von gro?er Bedeutung sind. Empfehlungen und Ausblick Unter Verwendung standardisierter Methoden vermitteln epiphytische Flechten ein differenziertes Bild der Luftbelastungssituation in Ballungsr?umen und in landwirtschaftlich genutzten Regionen. Darüber hinaus sind sie offensichtlich gute Indikatoren für Temperatur?nderungen ihrer Umgebung. Weiterer Forschungsbedarf besteht für die Verwendung epiphytischer Flechten zum Biomonitoring von Klimaver?nderungen.      

Degradation of paracetamol by advance oxidation processes using modified reticulated vitreous carbon electrodes with TiO2 and CuO/TiO2/Al2O3

The degradation of paracetamol in aqueous solutions in the presence of hydrogen peroxide was carried out by photochemistry, electrolysis and photoelectrolysis using modified 100 pores per inch reticulated vitreous carbon electrodes. The electrodes were coated with catalysts such as TiO₂ and CuO/TiO₂/Al₂O₃ by electrophoresis followed by heat treatment. The results of the electrolysis with bare reticulated vitreous carbon electrodes show that 90% paracetamol degradation occurs in 4 h at 1.3 V vs. SCE, forming intermediates such as benzoquinone and carboxylic acids followed by their complete mineralisation. When the electrolysis was carried out with the modified electrodes such as TiO₂/RVC, 90% degradation was achieved in 2 h while with CuO/TiO₂/Al₂O₃/RVC, 98% degradation took only 1 h. The degradation was also carried out in the presence of UV reaching 95% degradation with TiO₂/RVC/UV and 99% with CuO/TiO₂/Al₂O₃/RVC/UV in 1 h. The reactions were followed by spectroscopy UV-Vis, HPLC and total organic carbon analysis. These studies show that the degradation of paracetamol follows a pseudo-first order reaction kinetics.     

Bioaccessibility of trace elements as affected by soil parameters in smelter-contaminated agricultural soils: a statistical modeling approach

An investigation was undertaken to identify the most significant soil parameters that can be used to predict Cd, Pb, and Zn bioaccessibility in smelter-contaminated agricultural soils. A robust model was established from an extended database of soils by using: (i) a training set of 280 samples to select the main soil parameters, to define the best population to be taken into account for the model elaboration, and to construct multivariate regression models, and (ii) a test set of 110 samples to validate the ability of the regression models. Total carbonate, organic matter, sand, P(2)O(5), free Fe-Mn oxide, and pseudototal Al and trace element (TE) contents appeared as the main variables governing TE bioaccessibility. The statistical modeling approach was reasonably successful, indicating that the main soil factors influencing the bioaccessibility of TEs were taken into account and the predictions could be applicable for further risk evaluation in the studied area.     

Numerical simulation of an array of fences in Saemangeum reclaimed land

This paper discusses about the quantitative effect of windbreak fences on wind velocity in the reclaimed land at Saemangeum in South Korea. Windbreak fences were constructed in the reclaimed land to reduce the wind velocity to prevent the generation and diffusion of dust. However, up to this time, no in-depth studies were conducted to quantitatively measure the effect of the windbreak fences on wind velocity thus an optimum windbreak structure is not yet determined. Using CFD simulations, the effects of fence porosity, fence height, and the distance between the adjacent fences were investigated. A wind tunnel experiment was initially conducted and data gathered were used to develop the CFD models. From the experiments and CFD simulations, the overall percentage difference of the measured velocities was 7.20% which is generally acceptable to establishing the reliability of the CFD models. The reduction effect on wind velocity was measured in between the adjacent fences up to a height of 0.6 m from the ground surface. In terms of porosity ( = 0, 0.2, 0.4, 0.6), 0.2 was found to be the optimum value. Conversely, the effect of fence height (0.6, 0.8 and 1.0 m) showed no significant difference; therefore, 0.6 m height is recommended. In addition, the reduction effect of distance between the adjacent fences (2, 4 and 6 m) on wind velocity having a 0.2 porosity has decreased to about 75% regardless of the distance. In the case of the reclaimed land in Saemangeum, a decrease of 75% can prevent the generation and diffusion of dusts. However, the source of dusts is very large. Therefore, constructing an array of windbreak with 6 m distance between them is deemed necessary.     

Particle size distribution of airborne Aspergillus fumigatus spores emitted from compost using membrane filtration

Information on the particle size distribution of bioaerosols emitted from open air composting operations is valuable in evaluating potential health impacts and is a requirement for improved dispersion simulation modelling. The membrane filter method was used to study the particle size distribution of Aspergillus fumigatus spores in air 50 m downwind of a green waste compost screening operation at a commercial facility. The highest concentrations (approximately 8 × 10⁴ CFU m⁻³) of culturable spores were found on filters with pore diameters in the range 1–2 μm which suggests that the majority of spores are emitted as single cells. The findings were compared to published data collected using an Andersen sampler. Results were significantly correlated (p < 0.01) indicating that the two methods are directly comparable across all particles sizes for Aspergillus spores.     

C60 fullerene: a powerful antioxidant or a damaging agent? The importance of an in-depth material characterization prior to toxicity assays

Since the discovery of fullerenes in 1985, these carbon nanospheres have attracted attention regarding their physico/chemical properties. Despite little knowledge about their impact on the environment and human health, the production of fullerenes has already reached an industrial scale. However, the toxicity of C₆₀ is still controversially discussed.The aim of this study was to clarify the biological effects of tetrahydrofuran (THF) suspended C₆₀ fullerene in comparison to water stirred C₆₀ fullerene suspensions. Beyond that, we analyzed the effects on the Crustacea Daphnia magna an indicator for ecotoxicological effects and the human lung epithelial cell line A549 as a simplified model for the respiratory tract.We could demonstrate that water-soluble side products which were formed in THF nC₆₀ suspension were responsible for the observed acute toxic effects, whereas fullerenes themselves had no negative effect regardless of the preparative route on either A549 cell in vitro or D. magna in vivo.     

Cd-tolerant Suillus luteus: A fungal insurance for pines exposed to Cd

Soil metal pollution can trigger evolutionary adaptation in soil-borne organisms. An in vitro screening test showed cadmium adaptation in populations of Suillus luteus (L.: Fr.) Roussel, an ectomycorrhizal fungus of pine trees. Cadmium stress was subsequently investigated in Scots pine (Pinus sylvestris L.) seedlings inoculated with a Cd-tolerant S. luteus, isolated from a heavy metal contaminated site, and compared to plants inoculated with a Cd-sensitive isolate from a non-polluted area. A dose-response experiment with mycorrhizal pines showed better plant protection by a Cd-adapted fungus: more fungal biomass and a higher nutrient uptake at high Cd exposure. In addition, less Cd was transferred to aboveground plant parts. Because of the key role of the ectomycorrhizal symbiosis for tree fitness, the evolution of Cd tolerance in an ectomycorrhizal partner such as S. luteus can be of major importance for the establishment of pine forests on Cd-contaminated soils.     

Analysis of phytochelatin complexes in the lead tolerant vetiver grass [Vetiveria zizanioides (L.)] using liquid chromatography and mass spectrometry

Ethylenediamene tetraacetic acid (EDTA) has been used to mobilize soil lead (Pb) and enhance plant uptake for phytoremediation. Chelant bound Pb is considered less toxic compared to free Pb ions and hence might induce less stress on plants. Characterization of possible Pb complexes with phytochelatins (PC_n, metal-binding peptides) and EDTA in plant tissues will enhance our understanding of Pb tolerance mechanisms. In a previous study, we showed that vetiver grass (Vetiveria zizanioides L.) can accumulate up to 19,800 and 3350 mg Pb kg⁻¹ dry weight in root and shoot tissues, respectively; in a hydroponics set-up. Following the basic incubation study, a greenhouse experiment was conducted to elucidate the efficiency of vetiver grass (with or without EDTA) in remediating Pb-contaminated soils from actual residential sites where Pb-based paints were used. The levels of total thiols, PC_n, and catalase (an antioxidant enzyme) were measured in vetiver root and shoot following chelant-assisted phytostabilization. In the presence of 15 mM kg ⁻¹ EDTA, vetiver accumulated 4460 and 480 mg Pb kg⁻¹ dry root and shoot tissue, respectively; that are 15- and 24-fold higher compared to those in untreated controls. Despite higher Pb concentrations in the plant tissues, the amount of total thiols and catalase activity in EDTA treated vetiver tissues was comparable to chelant unamended controls, indicating lowered Pb toxicity by chelation with EDTA. The identification of glutathione (referred as PC₁) (m/z 308.2), along with chelated complexes like Pb-EDTA (m/z 498.8) and PC₁-Pb-EDTA (m/z 805.3) in vetiver root tissue using electrospray tandem mass spectrometry (ES-MS) highlights the possible role of such species towards Pb tolerance in vetiver grass.     

Perfluorinated compounds in the Pearl River and Yangtze River of China

A total of 14 perfluorinated compounds (PFCs) were quantified in river water samples collected from tributaries of the Pearl River (Guangzhou Province, south China) and the Yangtze River (central China). Among the PFCs analyzed, perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) were the two compounds with the highest concentrations. PFOS concentrations ranged from 0.90 to 99 ng/l and <0.01–14 ng/l in samples from the Pearl River and Yangtze River, respectively; whereas those for PFOA ranged from 0.85 to 13 ng/l and 2.0–260 ng/l. Lower concentrations were measured for perfluorobutane sulfonate (PFBS), perfluorohexane sulfonate (PFHxS), perfluorooctanesulfoamide (PFOSA), perfluorohexanoic acid (PFHxA), perfluoroheptanoic acid (PFHpA), perfluorononaoic acid (PFNA), perfluorodecanoic acid (PFDA), and perfluoroundecanoic acid (PFUnDA). Concentrations of several perfluorocarboxylic acids, including perfluorododecanoic acid (PFDoDA), perfluorotetradecanoic acid (PFTeDA), perfluorohexadecanoic acid (PFHxDA) and perfluorooctadecanoic acid (PFOcDA) were lower than the limits of quantification in all the samples analyzed. The highest concentrations of most PFCs were observed in water samples from the Yangtze River near Shanghai, the major industrial and financial centre in China. In addition, sampling locations in the lower reaches of the Yangtze River with a reduced flow rate might serve as a final sink for contaminants from the upstream river runoffs. Generally, PFOS was the dominant PFC found in samples from the Pearl River, while PFOA was the predominant PFC in water from the Yangtze River. Specifically, a considerable amount of PFBS (22.9–26.1% of total PFC analyzed) was measured in water collected near Nanjing, which indicates the presence of potential sources of PFBS in this part of China. Completely different PFC composition profiles were observed for samples from the Pearl River and the Yangtze River. This indicates the presence of dissimilar sources in these two regions.