Hydrodynamics of the Segara Anakan lagoon

A hydrodynamic field study of the Segara Anakan lagoon combined with a reconstruction of the recorded data using a three-dimensional numerical model provides insights into the processes driving the hydrodynamics of the lagoon. This includes bathymetry, quantification of water volume fluxes with ADCP measurements, sea level recordings, salinity measurements, water budget and numerical model results for the periods of the field studies. Salinity measurements at the Klaces village show a complete flushing of the western lagoon during neap tide in the rainy season, which is assumed to increase the sedimentation. Mean salinities of the western part are in the order of 10 and 21 g/kg, while the eastern part has a larger mean salinity of 27 and 32 g/kg for the rainy and dry season, respectively. A numerical sensitivity study shows a relationship between the Citanduy discharge and the nett water volume transport between the eastern and western part of Segara Anakan. A nett transport to the west, which differs from neap to spring tides, turns to zero when Citanduy discharges are between 300 and 400 m³/s. The flushing time of the lagoon depends on the monsoon season and is about 1–3 days at the western outlet and increases to 12 days in the central parts.     

Establishment of a constructed wetland in extreme dryland

Background, aim, and scope

The project was set to construct an extensive wetland in the southernmost region of Israel at Kibbutz Neot Smadar (30°02′45″ N and 35°01′19″ E). The results of the first period of monitoring, summary, and perspectives are presented. The constructed wetland (CW) was built and the subsequent monitoring performed in the framework of the Southern Arava Sustainable Waste Management Plan, funded by the EU LIFE Fund. The specific aims were: (1) To end current sewage disposal and pollution of the ground, the aquifer, and the dry river bed (wadi) paths by biologically treating the sewage as part of the creation of a sustainable wetland ecosystem. (2) Serve as an example of CW in the Negev highlands and the Arava Valley climates for neighboring communities and as a test ground for plants and building methods appropriate to hyper arid climate. (3) Serve as an educational resource and tourist attraction for groups to learn about water reuse, recycling, local wildlife and migrating birds, including serving the heart of a planned Ecological–Educational Bird Park. This report is intended to allow others who are planning similar systems in hyper arid climates to learn from our experience.

Materials and methods

The project is located in an extreme arid desert with less than 40 mm of rain annually and temperature ranges of ?5°C to +42°C. The site receives 165–185 m³ of municipal and agricultural wastes daily, including cowshed and goat wastes and winery outflow.

Results

The CW establishment at Neot Smadar was completed in October 2006. For 8 months, clean water flowed through the system while the plants were taking root. In June 2007, the wetland was connected to the oxidation pond and full operation began. Because of seepage and evaporation, during the first several months, the water level was not high enough to allow free flow from one bed to the next. To bed A, the water was pumped periodically from the oxidation pond (Fig. 1) and from there flowed by gravitation through the rest of the system. The initial results of the monitoring are promising. In nearly all measurements, the system succeeded as expected to reduce levels of contaminants at least to the level acceptable for irrigating fruit trees and often to the level of unlimited irrigation. The introduction of the plants in the system and their physiological performance were evaluated and were found to correlate well to the quality of water in the various beds.

Discussion

It should be said at the outset that evaluation of the performance of a CW system is a long-term process. Thus, the main aim of this report is to present the problems, difficulties, preliminary results, and concepts concerned with the first stage of establishment of CW in an extremely dry region.

Conclusions

The CW system was designed to dispose of municipal and agricultural wastes in a way that not merely reduces pollution, but adds to environmental quality by creating accessible parkland for local residents and tourists. Several factors affected the performance of the system at the initial stages of operation: ecological balance between microbes and plants, big seasonal variations, seepage and evaporation reduced the flow in the initial operation of the system. Despite the initial difficulties, the quality of water coming out the system is acceptable for irrigation.

Recommendations and perspectives

The CW can function well under extreme dryland conditions. The oxidation pond was the major source of evaporation and bad odors. Therefore, alternatives to the oxidation pond are needed. Cost effectiveness of the system still has to be evaluated systematically.     

Measured reduction of kerbside ultrafine particle number concentrations in Copenhagen

The average particle number concentration kerbside at a busy street in Copenhagen has been reduced by 27% from the period 2002–2004 to the period 2005–2007. The reduction is in the ultrafine particle range (<100 nm). Strong evidence indicates that a significant part of the reduction, especially in the size range <30 nm, is due to the transition to sulphur-free (<10 ppm) diesel fuel and petrol in Denmark at New Year 2005.     

The role of remote sensing in hydrological modelling of the Okavango Delta, Botswana

A coupled surface water-groundwater model of the Okavango Delta has been built based on the United States Geological Survey software MODFLOW 2000 including the SFR2 package for stream-flow routing. It will provide a new tool for evaluating water management and climate change scenarios. The delta's size and limited accessibility make direct, on the ground data acquisition difficult. Remote sensing methods are the most promising source of acquiring spatially distributed data for both model input parameters and calibration. Topography, aquifer thickness, channel positions, evapotranspiration and precipitation data are all based on remote sensing. Simulated flooding patterns are compared to patterns derived from visible to thermal NOAA-AVHRR data and microwave radar ENVISAT-ASAR data.     

The role of analogues in radioecology

If no data are available for a specific radionuclide its analogue could be used in radioecological models. They might be used not only in the frame of screening modelling. Relevant processes and features have to be known, such as time scales of these processes, physical, chemical and biological properties of the environment and relevant media. An analogue could only be proven to be valid by comparing its behaviour in the conditions of interest, while confidence in the validity of an analogue will increase as the quality of the justification increases, there will always be some residual uncertainty. Several main types of analogy can be used when measured or recommended values are not available: the same parameter obtained for another isotope of the same element; the same parameter obtained for another element; a different parameter obtained for the same element. There are several cases, when analogues might be applied as indicators of the determining processes in the radioecological studies.     

Influence of temporally variable groundwater flow conditions on point measurements and contaminant mass flux estimations

Monitoring of contaminant concentrations, e.g., for the estimation of mass discharge or contaminant degradation rates, often is based on point measurements at observation wells. In addition to the problem, that point measurements may not be spatially representative, a further complication may arise due to the temporal dynamics of groundwater flow, which may cause a concentration measurement to be not temporally representative. This paper presents results from a numerical modeling study focusing on temporal variations of the groundwater flow direction. “Measurements” are obtained from point information representing observation wells installed along control planes using different well frequencies and configurations. Results of the scenario simulations show that temporally variable flow conditions can lead to significant temporal fluctuations of the concentration and thus are a substantial source of uncertainty for point measurements. Temporal variation of point concentration measurements may be as high as the average concentration determined, especially near the plume fringe, even when assuming a homogeneous distribution of the hydraulic conductivity. If a heterogeneous hydraulic conductivity field is present, the concentration variability due to a fluctuating groundwater flow direction varies significantly within the control plane and between the different realizations. Determination of contaminant mass fluxes is also influenced by the temporal variability of the concentration measurement, especially for large spacings of the observation wells. Passive dosimeter sampling is found to be appropriate for evaluating the stationarity of contaminant plumes as well as for estimating average concentrations over time when the plume has fully developed. Representative sampling has to be performed over several periods of groundwater flow fluctuation. For the determination of mass fluxes at heterogeneous sites, however, local fluxes, which may vary considerably along a control plane, have to be accounted for. Here, dosimeter sampling in combination with time integrated local water flux measurements can improve mass flux estimates under dynamic flow conditions.     

Assessing the long-term supply risks for mineral raw materials—a combined evaluation of past and future trends

This paper develops a method for identifying and assessing long-term supply risks for mineral raw materials. The method is based on a combined evaluation of past and future supply and demand trends. By analysing raw material boom and bust cycles over the past 50 years, we have quantified indicators and defined benchmarks for identifying critical market situations. By applying the method, risks for supply shortage may be identified at an early stage. In addition, a numerical evaluation model has been developed for better comparison between various mineral raw materials. Compared to other assessment methods this method uses specific benchmarks for each raw material to better assess supply risks. The method is embedded within a systematic and comprehensive analytical approach.     

From land cover change to land function dynamics: a major challenge to improve land characterization

Land cover change has always had a central role in land change science. This central role is largely the result of the possibilities to map and characterize land cover based on observations and remote sensing. This paper argues that more attention should be given to land use and land functions and linkages between these. Consideration of land functions that provide a wide range of goods and services makes more integrated assessments of land change possible. The increasing attention to multifunctional land use is another incentive to develop methods to assess changes in land functions. A number of methods to quantify and map the spatial extent of land use and land functions are discussed and the implications for modeling are identified based on recent model approaches in land change science. The mixed use of land cover, land use and land function in maps and models leads to inconsistencies in land change assessments. Explicit attention to the non-linear relations between land cover, land use and land function is essential to consistently address land change. New methods to map and quantify land function dynamics will enhance our ability to understand and model land system change and adequately inform policies and planning.     

Model-based prediction of long-term leaching of contaminants from secondary materials in road constructions and noise protection dams

In this study, contaminant leaching from three different secondary materials (demolition waste, municipal solid waste incineration ash, and blast furnace slag) to groundwater is assessed by numerical modeling. Reactive transport simulations for a noise protection dam and a road dam (a typical German autobahn), in which secondary materials are reused as base layers, were performed to predict the breakthrough of a conservative tracer (i.e., a salt) and sorbing contaminants (e.g., PAHs like naphthalene and phenanthrene or heavy metals) at the groundwater table. The dam constructions have a composite architecture with soil covers in inclined layers and distinct contrasts in the unsaturated hydraulic properties of the used materials. Capillary barrier effects result in strong spatial variabilities of flow and transport velocities. Contaminant breakthrough curves at the groundwater table show significant tailing due to slow sorption kinetics and a wide distribution of travel times. While conservative tracer breakthrough depends primarily on subsoil hydraulic properties, equilibrium distribution coefficients and sorption kinetics represent additional controlling factors for contaminant spreading. Hence, the three secondary materials show pronounced differences in the temporal development of leached contaminant concentrations with consequences for breakthrough times and peak concentrations at the groundwater table. Significant concentration reductions due to dispersion occur only if the source concentrations decrease significantly prior to the arrival of the contaminant at the groundwater table. Biodegradation causes significant reduction of breakthrough concentrations only if flow velocities are low.     

Implications of turnover and trust for safety attitudes and behaviour in work teams

Turnover potentially leads to a new individual being selected into a work team. This study investigated the safety-specific trust which team members place in their organisation’s selection and induction processes, and related this to the perceived risk from new employees. The research was conducted with teams working in forest harvesting, an occupation which has high-turnover, high risk and a high accident rate. Results indicate that trust in induction processes was negatively correlated with perceived risk from a new employee. Team members also engaged in a number of safety ensuring behaviours when a new individual joined the team, and these were related to the level of perceived risk, and how much they cared about their team members’ safety. It is argued that trust in the safety-specific characteristics of an organisation’s selection and induction process may have negative consequences for safety.