A Method of Mercury Removal from Topsoil Using Low-Thermal Application

Mercury contamination in the environment is problematic due to the unusual physical properties and well-recognized toxicity of this common metal. The bioavailability of mercury depends strongly on its chemical speciation. Anthropogenic mercury and its compounds appear in soil as hot spots located close to industrial facilities that used or produced mercury. The nature of the chemical production process, transportation and disposal practices often determined the chemical composition and distribution of mercury in the surrounding soils. Current ex situ soil remediation methods are expensive, produce undesirable side effects to the environment and usually involve transportation of contaminated soil.In this project, sponsored by the U.S. Department of Energy, a low-cost, simple approach to removing mercury from soil was evaluated. The process uses low-temperature thermal desorption of volatile metallic mercury and its compounds, and subsequent vapor capture.The project consisted of laboratory and plot-scale experiments. The laboratory efforts evaluated theoretical calculations of mercury removal as a function of time and temperature. The plot-scale experiment was a practical application of the laboratory results. For both experiments, mercury-polluted soil was obtained from a chemical production facility located in southern Poland. In laboratory experiments, at temperature 373 K total mercury concentration decreased in soil by nearly 32%. In plot-scale experiments, at temperature 440 K, about 60–70% of total mercury was removed from the soil.At the end of the experiment, a test of soil biological activity was performed to check if the high temperature applied to the soil did not impair the soil growth properties. There was no negative effect of temperature found.     

Establishing the link between ammonia emission control and measurements of reduced nitrogen concentrations and deposition

In the context of international efforts to reduce the impactsof atmospheric NH₃ and NH₄ ⁺ (collectively, NH_x), it is important to establish the link between NH₃emissions and monitoring of NH_x concentrations and deposition. This is equally relevant to situations where NH₃emissions changes are certain (e.g. due to changed source sectoractivity), as to cases where NH₃ abatement technologies havebeen implemented. Correct interpretation of adequate atmosphericmeasurements is essential, since monitoring data provide the onlymeans to evaluate trends in regional NH₃ emissions.These issues have been reviewed using available measurements and modelling from nine countries. In addition to historic datasets,the analysis here considers countries where NH₃ source sector activity changed (both increases and decreases) and countries where NH₃ abatement policies have been implemented.In The Netherlands an `ammonia gap' was identified between the expected reduction and results of monitoring, and was attributedinitially to ineffectiveness of the abatement measures. The analysis here for a range of countries shows that atmospheric interactions complicate the expected changes, particularly sinceSO₂ emissions have decreased at the same time, while at manysites the few years of available data show substantial inter-annual variation. It is concluded that networks need to beestablished that speciate between NH₃ and aerosol NH₄ ⁺, in addition to providing wet deposition, and sample at sufficient sites for robust regional estimates to be established. Such measurements will be essential to monitor compliance of the international agreements on NH₃ emission abatement.     

Physicochemical characteristics of animal and municipal wastes decomposed in arid soils

The application of anaerobically processed animal manure to maintain adequate levels of organic matter in arid soils is becoming a common practice. The purpose of this study was to characterize two farm manure products as compared with municipal waste compost (MWC). The anaerobic processing to obtain a biogas manure (BM) product was much faster (25 d) than the aerobic composting of farmyard manure (FYM) (90 d). Drying by three different methods (solar-drying, vacuum-drying at 45 degrees C, and freeze-drying) did not affect the quality of BM. Based on the chemical characteristics, FYM and BM products were comparable, and, containing less ash (30%) and heavy metals (50 mg Pb kg(-1)), seemed superior to MWC that contained 65% ash and 108 mg Pb kg(-1). On the other hand, MWC had higher C content (69.9%), lower acidity (15.04 mol kg(-1)), and higher exothermic peaks (300-460 degrees C) than BM and FYM (50% C, 20 mol kg(-1), and 275-450 degrees C, respectively), thus showing a greater extent of humification. Also, when the organic materials were incubated with arid soils and monitored for mean residence times (MRT), MWC was slightly more resistant to decomposition (MRT 175-180 d) than BM or FYM (MRT 161-166 d). The observed differences, however, were too small to dismiss any of the products as a valuable material for land applications to improve soil quality. In view of the results obtained, MWC may be considered an adequate substitute for BM or FYM, whenever the latter are in short supply.     

Mineral constituents in Leccinum scabrum from lowland locations in the central Europe and their relation to concentration in forest topsoil

Leccinum scabrum is an edible mushroom common in European regions in the northern hemisphere. Macro and trace mineral constituents such as Ag, Al, Ba, Ca, Cd, Co, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, P, Rb, Sr and Zn were studied in L. scabrum and in the top soil collected from the same location underneath soil substratum. The “pseudo-total” and labile (extractable fraction of minerals) were measured to get insight into the levels, distribution between the morphological parts of fruiting bodies, potential for their bioconcentration by mushroom and evaluated for human exposure via consumption of the mushroom. The sampling sites include the Dar?lubska Wilderness, Trójmiejski Landscape Park, Sobieszewo Island, Wdzydze Landscape Park and outskirts of the K?trzyn town in Mazury from the norther part of Poland. Median values of K, Rb and P concentrations in dehydrated L. scabrum were for caps in range 27,000–44,000 mg kg^?1, 90–320 mg kg^?1 and 6,200–9,100 mg kg^?1, and followed by Mg at 880–1,000 mg kg^?1, Ca at 48–210 mg kg^?1 and Al at 15–120 mg kg^?1. The median concentrations of Cu, Fe, Mn and Zn in caps were in range 15–27 mg kg^?1 db 38–140 mg kg^?1, 5.3–27 mg kg^?1 and 130–270 mg kg^?1. For Ba and Sr, concentrations on the average were at ～1 mg kg^?1, and almost equally distributed between the caps and stipes of the fruiting bodies. L. scabrum mushrooms were low in toxic Ag, Cd, Hg and Pb, for which the median values in dried caps from five locations were, respectively, in range 0.48–0.98 mg kg^?1 (cap to stipe index, Q_C/S, was 2.5–4.1), 1.0–5.8 mg kg^?1 (Q_C/S 2.9–3.8), 0.36–0.59 mg kg^?1 (Q_C/S 1.6–2.7) and 0.20–0.91 mg kg^?1 (Q_C/S 1.2–1.9). Substantial variations in the concentrations of the “pseudo-total” fraction (extracted by aqua regia) or labile fraction (extracted by 20% solution of nitric acid) of the elements determined in forest topsoils were noted between some of the locations examined. The elements K, P, Cd, Cu, Hg, Mn, Na, Rb and Zn can be considered as those which were bioconcentrated by L. scabrum in fruiting bodies, while the rates of accumulation varied with the sampling location.     

Pickling of chanterelle <Emphasis Type="Italic">Cantharellus cibarius</Emphasis> mushrooms highly reduce cadmium contamination

Mushrooms are considered as potential bio-remediation agents in soil polluted with heavy metals, while many species which efficiently accumulate them in flesh are edible. Question is if there is any possible culinary use of edible mushrooms with high heavy metal contents? This study aimed to investigate and discuss a fate of cadmium (Cd) in common household-treated fruitbodies of common chanterelle Cantharellus cibarius. The samples of Cantharellus cibarius Fr. were collected from five spatially distanced sites in Poland in 2011–2012. We examined from 267 to 358 fruiting bodies per collection, and in total 1565 fruiting bodies were used. Cadmium in fungal materials from all treatments and processes (mushrooms dried, deep frozen, blanched and pickled) was determined using validated methods by inductively coupled plasma mass spectrometry with dynamic reaction cell. Blanching of fresh chanterelles caused decrease of Cd by around 11 ± 7 to 36 ± 7%, while blanching of deep-frozen mushrooms by around 40 ± 6%. A rate of Cd decrease in chanterelles was similar when the fruiting bodies were blanched for 5 or 15 min and when used was potable or deionized water. Pickling of blanched chanterelles with a diluted vinegar marinade had a pronounced effect on further removal of Cd. Blanched chanterelles when pickled lost an extra 37–71% of Cd. Total leaching rate of Cd from fresh or deep-frozen fruitbodies of chanterelle when blanched and further pickled was between 77 ± 7 and 91 ± 4%. Blanching and pickling highly decreased content of Cd in C. cibarius.     

Norwegian Meteorological Institute’s real-time dispersion model snap (Severe Nuclear Accident Program): Runs for ETEX and ATMES II experiments with different meteorological input

The Norwegian Meteorological Institute (DNMI) has developed and implemented for operational use a real-time dispersion model Severe Nuclear Accident Program (SNAP) with capability for predicting concentrations and depositions of the radioactive debris from large accidental releases. SNAP has been closely linked to DNMI’s operational numerical weather prediction (NWP) models.How good are these predictions? Participation in ETEX has partly answered this question. DNMI used SNAP with LAM50S giving meteorological input for these real-time dispersion calculations. LAM50S Limited Area Model with 50 km grid squareswas DNMI’s operational NWP model in 1994 when ETEX took place.In this article we report on how SNAP performed in the first of the ETEX releases in near-real-time mode, using LAM50S—and in hindcast mode for ATMES II, using “ECMWF 1995: ETEX Data set (ATMES II)”as meteorological input data. These two input data sets came from NWP models with quite different characteristics but with similar resolution in time and space.The results from these dispersion simulations matched closely. Deviations early in the simulation period shrank to insignificant differences later on. Since both input data sets were based on “weather analysis” and had similar resolution in space and time, SNAP described the dispersion of the released material very similar in these two simulations.     

Interlaboratory comparisons in EMF survey measurements

This article presents methods and results of interlaboratory comparison in the electromagnetic field (EMF) survey measurements performed by Electromagnetic Environment Protection Laboratory. Based on the results, the author analyzed factors affecting the precision of EMF measurements, in particular—difficult to estimate—the “human factor”. In practice, the human factor has never been taken into account in the EMF measurements accuracy estimations budget, and the author estimate the importance of this factor that may include even up to half of the total uncertainty of measurements. Taking into account all factors depredating the accuracy of measurements, the uncertainty of the survey EMF measurements was estimated at the level of 2–4 dB.     

Microbially mediated cadmium sorption/desorption processes in soil amended with sewage sludge

A multi-compartment system was used to study the importance of microorganisms for Cd desorption from soil amended with sewage sludge and simultaneous resorption of the mobilized metal by soil constituents. Using this system made it possible to study the participation of microorganisms (Arthrobacter, Trichoderma), montmorillonite, humic acids, and iron oxides in resorption of the released Cd. A filter-sterilized water extract of root-free soil of pH 6.7 (RF) or RF supplemented with glucose (RFG) were used to mobilize Cd from soil at 14 degrees C in 48 h. Cadmium found in those extracts after 48-h incubation was recognized as bioavailable. Changes in pH values and enrichment of soil extracts with organic acids and siderophores resulted from microbial growth. RFG with lower pH and a higher content of ligands mobilized, on average, 40% of Cd introduced with sewage sludge amended soil, whereas RF mobilized only 20% of it. Sequential extractions of Cd at time 0 and Cd remaining in soil showed that RFG had mobilized Cd mostly from the fraction bound with Fe and Mn oxides. Microbial biomass accounted for only up to 3.4% (w/w) of the soil constituents used in the experiments but resorbed 25% of mobilized Cd. The chemical composition of mobilizing soil extracts and the solid-to-mobilizing-extracts volume ratio had a significant effect on the amount of bioavailable Cd. The results of the study suggest that microbial metabolites were involved in Cd mobilization, while the biomass of microorganisms was involved in Cd resorption as a biosorbent.     

Variations in the Fluoride Level in Precipitation in a Region of Human Impact

The research concerns the Wielkopolski National Park (West Poland), which suffered a huge human impact in the 1970s and 1980s owing to the nearby location of an industrial plant. Since then, fundamental technological changes that it introduced into its production of phosphate fertilizers have radically reduced the amount of pollution emitted. A three-year study (2002–2004) of fluorides in precipitation in open terrain and under tree crowns showed their concentrations to range from levels below the detection limit (0.003 mg/l) to 0.560 mg/l. Those registered under tree crowns were several times higher and indicated substantial dry deposition of fluorides on the trees. The highest values were recorded in 2003, with 43% of samples ranging from 0.01 to 0.05 mg/l, and with 51% of throughfall ranging from 0.10 to 0.50 mg/l. A strong connection was shown to exist between fluoride and sulphate concentrations in the precipitation. An analysis was made of the available data on F concentrations in the air and the dust levels around the factory, but these figures did not show an unequivocal effect on F concentrations in precipitation. A great similarity was found to occur between the fluoride content in rainwater in the Wielkopolski National Park and in the centre of the nearby Poznań metropolitan area, which indicates that there are also other F sources besides the local factory.     

Synergy between visual and auditory signals and its influence on the follow-up regulation quality.

The study aimed at verifying a hypothesis that supporting a visual signal of regulation deviation with an auditory one could improve the quality of regulation; the operator would have better information on machine operation. A special simulator was applied to follow-up tracking with a manual lever which controlled vertical movements of a cursor on a monitor screen. Simultaneously with visual information on screen, the operator was provided with an auditory deviation signal of pre-determined characteristics. 33 young males underwent the test. It was found that supporting a visual signal with an auditory one resulted in an improvement in the regulation quality by 5-6%, which proved synergy between those signals. The results may be used in designing tele- and servo-mechanisms, especially for remote control machinery, e.g., inspection robots or micromanipulators controlled by operators in a follow-up system.