Chemical compositions and sources of atmospheric PM10 in heating, non-heating and sand periods at a coal-based city in northeastern China

Mass concentrations and chemical components (18 elements, 9 ions, organic carbon [OC] and elemental carbon [EC]) in atmospheric PM(10) were measured at five sites in Fushun during heating, non-heating and sand periods in 2006-2007. PM(10) mass concentrations varied from 62.0 to 226.3 μg m(-3), with 21% of the total samples' mass concentrations exceeding the Chinese national secondary standard value of 150 μg m(-3), mainly concentrated in heating and sand periods. Crustal elements, trace elements, water-soluble ions, OC and EC represented 20-47%, 2-9%, 13-34%, 15-34% and 13-25% of the particulate matter mass concentrations, respectively. OC and crustal elements exhibited the highest mass percentages, at 27-34% and 30-47% during heating and sand period. Local agricultural residuals burning may contribute to EC and ion concentrations, as shown by ion temporal variation and OC and EC correlation analysis. Heavy metals (Cr, Ni, Zn, Cu and Mn) from coal combustion and industrial processes should be paid attention to in heating and sand periods. The anion/cation ratios exhibited their highest values for the background site with the influence of stationary sources on its upper wind direction during the sand period. Secondary organic carbon were 1.6-21.7, 1.5-23.0, 0.4-17.0, 0.2-33.0 and 0.2-21.1 μg m(-3), accounting for 20-77%, 44-88%, 4-77%, 8-69% and 4-73% of OC for the five sampling sites ZQ, DZ, XH, WH and SK, respectively. From the temporal and spatial variation analysis of major species, coal combustion, agricultural residual burning and industrial emission including dust re-suspended from raw material storage piles were important sources for atmospheric PM(10) in Fushun at heating, non-heating and sand periods, respectively. It was confirmed by principal component analysis that coal combustion, vehicle emission, industrial activities, soil dust, cement and construction dust and biomass burning were the main sources for PM(10) in this coal-based city.     

新安江水库浮游植物群落特征及影响因素分析

为了解新安江水库浮游植物群落特征及影响因素,于2008年1月—2009年12月,对其浮游植物和相关理化因子进行了单月1次的采样。共检测到浮游植物103种(属),浮游植物密度为1.46×106~2.55×107cells/L,年平均密度为6.09×106cells/L,春、秋季出现2个密度峰值;浮游植物组成随季节变化有所不同,春、冬季硅藻、隐藻占优势,夏季蓝藻、绿藻占优势,秋季蓝藻、硅藻占优势;浮游植物密度与TP、Chl-a及上月降水量均呈显著正相关,与透明度呈显著负相关,与TN相关性不明显;水库的水文形势季节性变化显著影响浮游植物结构和密度的变化,浮游植物生长短期效应明显受流域降水和温度双重影响;从大尺度生态效应角度看,食物网的下行效应可能是目前影响新安江水库浮游植物密度的主导因素,大规模滤食性的杂食性鱼类对浮游动物造成较高的捕食压力,间接促进了浮游植物种群的增长;磷是关键的营养盐因子,保持水体低磷浓度和氮磷比大于100,对降低浮游植物密度有现实意义。     

基于熵权综合健康指数法的瀛湖水生态系统健康评估

瀛湖是南水北调丹江口水库重要的水源涵养区,承担着丹江口水库60%的供水量,又是沿线乡镇和安康市城区饮用水水源地。在充分调查的基础上,采用综合健康指数法对1986—2012年之间瀛湖的水生态系统健康状况进行了评估,结果表明,1986—2005年,瀛湖水生态系统健康指数呈逐渐下降趋势,健康状态由健康降至一般病态;2005—2012年之间,瀛湖水生态系统健康指数总体呈上升趋势,健康状态除2010年为一般病态外,其余均为亚健康状态。     

燃煤电厂在线监测系统颗粒物浓度排放系数影响因素的探讨

选取上海市7家未安装气-气换热器的国控燃煤电厂作为研究对象,从煤质、除尘器、脱硫协同脱除作用以及锅炉工况负荷等方面探讨对颗粒物浓度排放系数 K值产生的影响,得出上述因素通过改变脱硫进口颗粒物浓度值影响 K值,当脱硫进口颗粒物浓度较低、波动范围较小时,其 K值也维持相对稳定的状态;当脱硫进口颗粒物浓度较高、波动范围较大时,其 K值也会发生较大的变化等结论。     

Assessing soil and groundwater contamination in a metropolitan redevelopment project

The purpose of this study was to assess contaminated soil and groundwater for the urban redevelopment of a rapid transit railway and a new mega-shopping area. Contaminated soil and groundwater may interfere with the progress of this project, and residents and shoppers may be exposed to human health risks. The study area has been remediated after application of first remediation technologies. Of the entire area, several sites were still contaminated by waste materials and petroleum. For zinc (Zn) contamination, high Zn concentrations were detected because waste materials were disposed in the entire area. For petroleum contamination, high total petroleum hydrocarbon (TPH) and hydrocarbon degrading microbe concentrations were observed at the depth of 7 m because the underground petroleum storage tank had previously been located at this site. Correlation results suggest that TPH (soil) concentration is still related with TPH (groundwater) concentration. The relationship is taken into account in the Spearman coefficient (α).     

Toxicity of atrazine and its bioaccumulation and biodegradation in a green microalga,Chlamydomonas mexicana

This study evaluated the toxicity of herbicide atrazine, along with its bioaccumulation and biodegradation in the green microalga Chlamydomonas mexicana. At low concentration (10 μg L^?1), atrazine had no profound effect on the microalga, while higher concentrations (25, 50, and 100 μg L^?1) imposed toxicity, leading to inhibition of cell growth and chlorophyll a accumulation by 22 %, 33 %, and 36 %, and 13 %, 24 %, and 27 %, respectively. Atrazine 96-h EC50 for C. mexicana was estimated to be 33 μg L^?1. Microalga showed a capability to accumulate atrazine in the cell and to biodegrade the cell-accumulated atrazine resulting in 14–36 % atrazine degradation at 10–100 μg L^?1. Increasing atrazine concentration decreased the total fatty acids (from 102 to 75 mg g^?1) and increased the unsaturated fatty acid content in the microalga. Carbohydrate content increased gradually with the increase in atrazine concentration up to 15 %. This study shows that C. mexicana has the capability to degrade atrazine and can be employed for the remediation of atrazine-contaminated streams.     

建筑物火灾的计算机区域模型

本研究运用区域方法模拟了建筑物火灾的发展过程,采用理论分析和经验公式相结合的方法,开发了火灾工程系统软件,分析求解了防火工程中的参数,该模型可为建筑物防火工程设计提供咨询、评估。     

甲撑二苯基二异氰酸酯(MDI)生产过程中危险有害因素及对策措施

甲撑二苯基二异氰酸酯 (MDI)生产过程中涉及到了多种危险有害因素。笔者通过对国内现役MDI生产装置进行调研 ,同时结合国内外其他涉及光气生产厂家的情况 ,分析并指出了生产过程中可能出现的危险有害因素 ,从而提出了相应的对策措施     

天津市城区暴雨沥涝仿真模拟系统的研究

天津市位于黄河水系尾闾，是我国北方重要的工业和港口城市。该市历史上一直遭受洪涝灾害的威胁，加之近几年市区范围不断扩大，不透水面积增加，排水能力远远不能适应城市的发展要求，城市沥涝问题日趋严重。为了掌握天津市暴雨沥涝的规律，减轻洪涝灾害对该市的影响，作者利用二维不恒定流水动力学模型和计算机信息管理及图形技术，采用Power Station Fortran 4.0和Visual Basic5.0编程语言，在Widows98环境下开发了天津市暴雨沥涝仿真模拟系统。该系统首次实现了从城市暴雨预报、监测到城市暴雨沥涝仿真模拟的研究， 不仅能够处理实时的不均匀的降雨信息，还能处理数值预报模型的预报降雨信息。系统的信息前后处理模块用图形方式管理仿真模型的各类信息，方便用户显示、查询和修改，使系统更加完整、实用。     

Anaerobic Biodegradation of Blends Based on Polyvinyl Alcohol

The presented work deals with blends composed of polyvinyl alcohol (PVA) and biopolymers (protein hydrolysate, starch, lignin). PVA does not belong to biologically inert plastics but its degradation rate (particularly under anaerobic conditions) is low. A potential solution to the issue problem lies in preparation of blends with readily degradable substrates. We studied degradation of blow-molded films made of commercial PVA and mentioned biopolymers in an aqueous anaerobic environment employing inoculation with digested activated sludge from the municipal wastewater treatment plant. Films prepared in the first experimental series were to be used for comparing biodegradation of blends modified with native or plasticized starch; in this case effect of plasticization was not proved. The degree of PVA degradation after modification with native or plasticized starch increases in a striking and practically same manner already at a starch level as low as approximately 5 wt.%. Films of the second experimental series were prepared as additionally modified with protein hydrolysate and lignin. Only lignin-modified samples exhibited a somewhat lower degree of biodegradation but regarding the measure of lignin present in blend this circumstance is not essential. Level of biodegradation with all discussed films differed only slightly—within range of experimental error.