不同有机物料对水稻根表铁膜及砷镉吸收转运的影响

通过盆栽试验研究了油菜秸秆、蚕豆秸秆、泥炭、猪粪堆肥和生物炭这5种有机物料对贵州石灰岩黄壤区某砷(As)和镉(Cd)复合污染稻田土壤As/Cd有效性、水稻根表铁膜及As/Cd吸收转运的影响.结果 表明,施用有机物料显著提高了有机质和水稻生物量;除油菜秸秆对土壤pH值影响不明显外,施用有机物料显著提高土壤pH值,使土壤有...     

基于模糊综合评判法对集中供热锅炉环保设施综合评价研究

以乌鲁木齐市某集中供热锅炉污染物减排方案为例,通过建立脱硫除尘设施综合评价指标体系,运用层次分析法确定指标权重,利用模糊综合评判法分别对两种除尘设施情况下的环境效益、经济效益以及设施能耗、物耗等指标着手,进行综合评价,最终评选出较优实施方案.评选结果表明：袋式除尘＋石灰石-石膏法脱硫除尘设施方案运用于该集中供热站综合效益较好,可有效实现污染物减排,为今后燃煤锅炉环保设施的评选提供一定的参考作用.     

苦草（Vallisneria natans）根系对沉积物中各形态磷的影响

采用磷分级提取的方法研究苦草(Vallisneria natans)生长过程中根系分布与沉积物不同形态磷和总磷的变化过程.在实验开始后20、50、80 d,分别测定苦草根系在沉积物的分布及沉积物中各形态磷的垂直变化.结果表明,苦草根系在实验装置中垂直分布在0~14 cm区域内.平均每株苦草根系根数为58条,平均根长为5.86 cm.苦草根系生物量在沉积物深度0~3、4~6、7~10、11~14 cm分配的质量分数分别为45.99%、32.75%、16.03%、5.23%.沉积物中总磷(TP),NaOH提取磷(NaOH-P)和有机磷(OP)含量在苦草根系分布集中区域内显著降低(P<0.05).HCl提取磷(HCl-P)和无机磷(IP)的含量无显著差异(P>0.05).     

臭气(恶臭)的测定与气味传感器

由于"气味"具有芳香(香味)和恶臭(臭味)等多种多样的特征,所以很难用同一尺度进行评价。因此,进行气味评价(量化)时,需要在明确目的的基础之上,选择适当的评价方法。在此对恶臭的相关测定方法以及在企业等现场进行自主管理时使用的简易测定方法,气味传感器(恶臭测试仪)的使用事例进行介绍。     

Comparison of quartz sand, anthracite, shale and biological ceramsite for adsorptive removal of phosphorus from aqueous solution

The choice of substrates with high phosphorus adsorption capacity is vital for sustainable phosphorus removal from waste water in constructed wetlands. In this study, four substrates were used： quartz sand, anthracite, shale and biological ceramsite. These substrate samples were characterized by X- ray diffractometry and scanning electron microscopy studies for their mineral components （chemical components） and surface characteristics. The dynamic experimental results revealed the following ranking order for total phosphorus （TP） removal efficiency： anthracite 〉 biological ceramsite 〉 shale 〉 quartz sand. The adsorptive removal capacities for TP using anthracite, biological ceramsite, shale and quartz sand were 85.87, 81.44, 59.65, and 55.98 mg/kg, respectively. Phosphorus desorption was also studied to analyze the substrates＇ adsorption efficiency in wastewater treatment as well as the substrates＇ ability to be reused for treatment. It was noted that the removal performance for the different forms of phosphorus was dependent on the nature of the substrate and the adsorption mechanism. A comparative analysis showed that the removal of particulate phosphorus was much easier using shale. Whereas anthracite had the highest soluble reactive phosphorus （SRP） adsorptive capacity, biological ceramsite had the highest dissolved organic phosphorus （DOP） removal capacity. Phosphorus removal by shale and biological ceramsite was mainly through chemical adsorption, precipitation or biological adsorption. On the other hand, phosphorus removal through physical adsorption （electrostatic attraction or ion exchange） was dominant in anthracite and quartz sand.     

Catalytic bubble-free hydrogenation reduction of azo dye by porous membranes loaded with palladium nanoparticles

Catalytic bubble-free hydrogenation reduction of azo dye by porous membranes loaded with palladium （Pd） nanoparticles was studied for the first time. The effects of Pd loading, dye concentration and reuse repetitions of membranes were investigated. In reduction, the dye concentration decreased whereas the pH rose gradually. An optimal Pd loading was found. The catalytic membranes were able to be reused more than 3 times.     

Debromination of decabromodiphenyl ether by organo-montmorillonite-supported nanoscale zero-valent iron：Preparation, characterization and influence factors

An organo-montmorillonite-supported nanoscale zero-valent iron material(M-NZVI) was synthesized to degrade decabromodiphenyl ether(BDE-209). The results showed that nanoscale zero-valent iron had good dispersion on organo-montmorillonite and was present as a core-shell structure with a particle size range of nanoscale iron between 30–90 nm, characterized by XRD, SEM, TEM, XRF, ICP-AES, and XPS. The results of the degradation of BDE-209 by M-NZVI showed that the efficiency of M-NZVI in removing BDE-209 was much higher than that of NZVI. The efficiency of M-NZVI in removing BDE-209 decreased as the pH and the initial dissolved oxygen content of the reaction solution increased, but increased as the proportion of water in the reaction solution increased.     

中国危险废物和医疗废物焚烧处置行业二（口恶）排放水平研究

通过调研全国危险废物和医疗废物焚烧处置设施,对包含二噁英排放水平的设施按处置对象、炉型和处理量分类,并作系统分析和研究.结果表明现有危险废物焚烧设施烟气中二噁英的浓度比医疗废物低,达标率为74.19%;危险废物选用回转窑处置效果较好,达标率为66.67%;而医疗废物选用回转窑或热解炉,要综合考虑处置规模、生产成本和二英排放总量等因素;危险废物介于10~30 t·d-1和医疗废物介于10~20 t·d-1的处置设施要尤其注意二噁英的排放问题;医疗废物焚烧飞灰中二噁英的均值浓度为危险废物6倍以上,仅有16.67%满足填埋要求.二者烟气中二英的浓度分布以1,2,3,4,6,7,8-HpCDF、2,3,7,8-TCDF和OCDD为主.     

基于地统计模型的上海大气污染物多建模方法的比较

地统计模型被广泛应用于环境空气污染物暴露模拟,但不同建模方法及其模拟结果之间的对比研究较少.基于上海2016~2019年55个环境空气监测点位的NO₂和PM_2.5观测数据,以及交通路网、排放源兴趣点和卫星数据等地统计变量,应用偏最小二乘回归（PLS）、监督学习线性回归（SLR）和机器学习随机森林（RF）这3种建模方法创建年暴露模型,并进一步应用普通克里金插值（OK）法分析模型残差,构建复合模型.应用交叉验证对模型的模拟效果进行检验,选取每一种建模方法的最优模型结构（是否应用OK）作为最终模型.结果表明,NO₂模型中表现最好的是RF-OK （R_mse²为0.70~0.82）和PLS-OK模型（R_mse²为0.78~0.84）;PM_2.5模型中PLS模型（R_mse²为0.62~0.71）优于SLR-OK （R_mse²为0.40~0.79）和RF-OK （R_mse²：0.31~0.56）模型.应用3种建模方法对上海1 km网格开展年暴露模拟和对比,NO₂模型间模拟结果的相关性（r为0.82~0.91）高于PM_2.5模拟结果的相关性（r为0.66~0.96）.基于3种模型2019年的模拟结果,评估了上海NO₂和PM_2.5的人群暴露水平.     

不同行业减排对我国东部地区空气质量及大气温度的影响

未来我国减排政策更加关注对大气污染和大气增温的协同控制效果,但不同行业减排对空气质量改善和大气温度的影响不同.利用双向耦合的空气质量模型WRF-Chem,通过多组敏感性试验量化各部门人为源（工业源、居民源、交通源、火电厂和农业源）减排对2016年9月我国东部地区空气质量和大气温度的影响.结果表明,工业源、居民源、交通源、火电厂和农业源减排均能有效改善空气质量,PM_2.5浓度分别下降33.9%、9.6%、15.8%、10.8%和26.7%,但减弱的气溶胶-辐射相互作用使地表层获得更多能量,进而增加近地面气温0.04、0.03、0.01、0.03和0.09℃.在大气层顶,工业源、居民源、交通源和火电厂减排分别导致净辐射通量下降0.3、0.8、0.7和0.1 W·m^-2;而农业源减排则引起大气层顶净辐射通量增加0.8 W·m^-2.一方面,减排农业源导致散射性气溶胶下降进而引起净辐射增加;另一方面,减排农业源不会导致吸收性气溶胶（黑碳）下降,不能抵消散射性气溶胶下降引起的辐射增加.因此,减排农业源会导致大气层顶净辐射通量增加,同时近地面温度增加也最为显著.未来需要特别关注的是,尽管控制农业源排放会带来显著的空气质量改善,但同时会带来不利的显著增温后果.