Organochlorine pesticides in soil profiles from Tianjin, China

Soil cores were collected from soils at five sites in Tianjin area for the determination of hexachlorocyclohexane isomers (HCHs, including alpha-HCH, beta-HCH, gamma-HCH and delta-HCH), dichlorodiphenyltrichloroethane and metabolites (DDXs, including p,p'-DDT, p,p'-DDE and p,p'-DDD) and total organic carbon (TOC). The levels and vertical distributions of HCHs and DDXs are studied. Results show that the application of pesticides in the past years was the major contributor of HCHs and DDXs accumulation in the sampling areas. Significant positive correlations were seen between the residual and application amounts of HCHs and DDXs. Wastewater irrigation did not bring a significant contribution of HCHs or DDXs into the soils. HCHs and DDXs concentrations peak at the surface and decline in soil profile with depth, while fluctuations were observed in the plow layers of some cultivated soils caused by frequent cultivation activities and batch irrigation. Positive correlations were observed between the contents of TOC and HCHs and DDTs. Although the amounts of HCHs application in all sampling sites are larger than DDXs, at surface and near surface layers of most sampling sites, the concentrations of summation operatorHCHs are lower than summation operatorDDXs. The composition of DDXs in the applied pesticides and sampled soils indicates that there is no recent DDT input at the sample areas.     

Adsorption characteristics of benzene on biosolid adsorbent and commercial activated carbons

This study selected biosolids from a petrochemical waste-water treatment plant as the raw material. The sludge was immersed in 0.5-5 M of zinc chloride (ZnCl2) solutions and pyrolyzed at different temperatures and times. Results indicated that the 1-M ZnCl2-immersed biosolids pyrolyzed at 500 degrees C for 30 min could be reused and were optimal biosolid adsorbents for benzene adsorption. Pore volume distribution analysis indicated that the mesopore contributed more than the macropore and micropore in the biosolid adsorbent. The benzene adsorption capacity of the biosolid adsorbent was 65 and 55% of the G206 (granular-activated carbon) and BPL (coal-based activated carbon; Calgon, Carbon Corp.) activated carbons, respectively. Data from the adsorption and desorption cycles indicated that the benzene adsorption capacity of the biosolid adsorbent was insignificantly reduced compared with the first-run capacity of the adsorbent; therefore, the biosolid adsorbent could be reused as a commercial adsorbent, although its production cost is high.     

二步法腈纶生产废水的处理试验

本试验采用混凝 -A/O系统组合工艺处理二步法腈纶废水 ,该系统处理效果良好 ,出水水质符合排放标准 ,可直接排入水体。A/O系统试验装置总容积 80L ,水力停留时间 5 8— 70h ,缺氧池与好氧池的容积比为 1∶3 ,回流比 ( 2—3 )∶1,COD和BOD总去除率分别约为 84%和 98%。     

Single particle mass spectrometry of oxalic acid in ambient aerosols in Shanghai: Mixing state and formation mechanism

Oxalic acid in individual aerosol particles was measured using single particle aerosol time-of-flight mass spectrometry (ATOFMS) in the summer of 2007 in Shanghai, China. Oxalate was found in 3.4% of total particles with diameters in the range of 0.2 – 2.0 μm. Size, chemical composition and hourly temporal counts of single particles that contained oxalic acid were measured. The predominant types of oxalate-containing particles were characterized to distinguish the primary and secondary sources of oxalic acid. Biomass burning was revealed as a major primary source of oxalic acid which contributed more than 20% of the oxalate-containing particles. Evidences for two different formation pathways of oxalic acid were observed in our experiment. The number fraction of oxalate-containing particles correlated with that of sulfate particles and the changes of air parcel backward trajectories, suggesting that in-cloud processing played important roles in oxalic acid formation. The diurnal patterns of dust and sea salt particle counts fitted well with the ambient relative humidity variation, suggesting that heterogeneous reactions occurring in hydrated/deliquesced aerosols also contributed to the production of oxalic acid.     

四种净水工艺对水源水微量有机物去除的研究

以UV254和CODMn代表饮用水源水中有机物替代指标.对常规处理、生物陶粒预处理、生物滤池、生物活性炭(BAC)、颗粒活性炭(GAC)、纳滤和光催化氧化进行组合,形成不同的处理流程,研究各流程对UV254和CODMn的去除效果.结果表明,各工艺流程都有一定的处理效率,其中以生物滤池和纳滤为主的组合流程处理效果最佳.此流程对UV254的去除率接近100%,CODMn的去除率达到78.6%,大大提高了饮用水的安全性.     

生物接触氧化结合气浮法处理卷烟综合废水

某卷烟厂采用生物接触氧化结合气浮法处理卷烟综合废水,经过3年的运行实践表明,工艺运行稳定可靠,在进水COD为300～1 500 mg/L、SS为100～600 mg/L、BOD5为100～900 mg/L、NH3-N为10～20 mg/L、水温为20～30 ℃时,出水COD《70 mg/L、BOD5《20 mg/L、SS《30 mg/L、NH3-N《3 mg/L,完全实现达标排放.     

工业循环经济发展区域分异研究--以江苏省为例

依据工业循环经济发展的基本原则,构建了包括产业及社会发展、资源减量、循环利用、污染减排、资源与环境安全五类指标在内的区域工业循环经济发展评价指标体系.运用AHP(层次分析法)方法,测算了指标权重,并以江苏省13个地级市为例进行了研究.用2003年的数据,对13个地级市的工业循环经济发展状况进行了评价.研究结果表明,江苏省13个地级市的工业循环经济发展水平可以分为四个层次,第一层次(水平良好)的城市为无锡、苏州、常州;第二层次(水平中上)的城市为盐城、南通、泰州;第三层次(水平中等)的城市为扬州、镇江、徐州、南京、连云港;第四层次(水平较差)的城市为淮安、宿迁.从总体上看,南部好于北部,东部好于西部,沿江沿海地区要好于内陆地区,靠近工业产业带的地区好于远离工业产业带的地区.     

氟苯胺好氧生物降解性能的研究

利用驯化污泥研究了邻氟苯胺、对氟苯胺、2,4-二氟苯胺的好氧生物降解性能.结果表明,3种氟苯胺的好氧生物降解性能从高到低依次为对氟苯胺、邻氟苯胺和2,4-二氟苯胺.降解动力学分析表明,除2,4-二氟苯胺在实验质量浓度8.56 mg/L时为一级反应,其他为零级反应;且它们的降解规律都符合Monod方程;30 ℃、振荡速率140 r/min为氟苯胺的最佳降解条件.同时研究了共基质条件下葡萄糖和苯胺对2,4-二氟苯胺的好氧降解的影响,葡萄糖的引入有促进作用,而苯胺只在一定浓度范围内有促进作用.氟苯胺的生产废水与生活污水合并处理以及多种组分混合废水处理是可行的.     

微囊藻毒素污染控制技术的研究进展

主要对水环境中微囊藻毒素污染的产生、毒性和去除方法进行了综述,在如何高效去除MCs方面具有重要意义.     

城市生活污水处理后回用作热电厂循环冷却水的可行性研究

选用适合热电厂特点的水处理剂,利用静态试验,动态模拟试验手段,对城市生活污水回用于热电厂循环冷却水系统中的复配药剂的阻垢缓蚀性能进行了研究.通过试验表明,污水回用是可行的,为城市生活污水回用于热电厂循环冷却水系统工程提供了可靠的参数.