Increasing collaboration between China and India in the environmental sciences to foster global sustainability

As the two largest countries by population, China and India have pervasive effects on the ecosphere. Because of their human population size and long international boundary, they share biodiversity and the threats to it, as well as crops, pests and diseases. We ranked the two countries on a variety of environmental challenges and solutions, illustrating quantitatively their environmental footprint and the parallels between them regarding the threats to their human populations and biodiversity. Yet we show that China and India continue to have few co-authorships in environmental publications, even as their major funding for scientific research has expanded. An agenda for collaboration between China and India can start with the shared Himalaya, linking the countries’ scientists and institutions. A broader agenda can then be framed around environmental challenges that have regional patterns. Coordinated and collaborative research has the potential to improve the two countries’ environmental performance, with implications for global sustainability.     

Knowledge spillovers and subsequent innovation in green energy: the role of public R&D

Environmental Science and Pollution Research -     

Long-term study of heavy metal pollution in the northern Hangzhou Bay of China: temporal and spatial distribution,contamination evaluation,and potential ecological risk

Environmental Science and Pollution Research - Coastal ecosystem is vulnerable to heavy metal contamination. The northern Hangzhou Bay is under intensifying impact of anthropogenic activities. To...     

曝气-絮凝处理垃圾渗滤液研究

通过现场处理 ,对垃圾渗滤液的曝气 -絮凝处理进行了研究。结果表明该方法对渗滤液的色度、COD、总磷去除率达 80 %以上 ,对氨氮去除率达 60 %以上。在此基础上提出了最优综合控制指标     

曝气策略对膜面剪切力的影响机制及其优化

曝气冲刷是浸没式MBR工艺不同于常规活性污泥法工艺的关键特征,然而现行规范的曝气系统设计与运行比较粗放,缺乏气泡尺寸模拟优化方法。以可直接观测的工程规模 (500 m³·d⁻¹) 膜生物反应器为研究对象,对穿孔管角度进行了优化研究,并用群体平衡模型(Population Balance Model,PBM)模型模拟污泥混合液不同粘度下的内部气泡分布情况。结果表明：穿孔管角度垂直向下、60°、45°、30°、垂直向上在膜面产生的平均剪切力分别为1.74、1.46、1.19、1.38、1.67 Pa,这表明曝气角度最优为垂直向下。0.3%、0.5%和0.8%浓度的羧甲基纤维素钠(Carboxymethyl cellulose, CMC)下产生的平均剪切力分别是1.51、1.92、2.24 Pa,气泡直径逐渐增大。且气泡尺寸越大、流速越大,分布越均匀。基于0.3%、0.5% CMC的速度实验结果与 PBM模拟结果基本吻合。该研究结果可为MBR技术的工艺优化和系统控制方法提升提供参考。     

Numerical modeling of changes in groundwater storage and nitrate load in the unconfined aquifer near a river receiving reclaimed water

Environmental Science and Pollution Research - Reclaimed water (RW) has been widely used as an alternative water resource to recharge rivers in mega-city Beijing. At the same time, the RW also...     

DSCAM-AS1 promotes cervical carcinoma cell proliferation and invasion via sponging miR-338-3p

Environmental Science and Pollution Research - Deregulated lncRNA DSCAM-AS1 expression was found in several tumors. However, mechanism and functional role of DSCAM-AS1 in cervical carcinoma remain...     

混凝与Fenton联用处理垃圾渗滤液的效能及成本

为对混凝/Fenton工艺与Fenton/混凝工艺处理垃圾渗滤液的效果和成本进行比较,分别对年轻渗滤液和老龄渗滤液原液按照混凝/Fenton工艺与Fenton/混凝工艺2种技术路线进行处理。实验结果表明,Fenton试剂对年轻垃圾渗滤液和老龄垃圾渗滤液COD去除率最高的反应条件为pH=3.5、H2O2和Fe2+的摩尔比为6、H2O2和渗滤液原液的COD质量比为3、反应时间4 h;在PAC与渗滤液原液的COD质量比为0.6时,PAC混凝对渗滤液原液的COD去除率最高。在对渗滤液COD去除率最高的Fenton反应和PAC混凝反应条件下,混凝/Fenton工艺对年轻渗滤液和老龄渗滤液的COD去除率分别为90.56%和86.56%;Fenton/混凝工艺对年轻渗滤液和老龄渗滤液的COD去除率分别为89.99%和85.99%,2种技术路线对渗滤液COD的去除率相差不大,但先PAC混凝后Fenton氧化工艺比先Fenton后混凝工艺每t节省62.6元,是更优化的渗滤液处理工艺。     

环境污染物的分子毒理机制研究进展

以分子生物学技术为基础研究污染物的毒理机制．从分子水平揭示了污染物毒作用的本质。综述了国内外分子毒理机制的研究进展。详细阐述了毒理芯片、单细胞凝胶电泳等分子生物学技术应用与毒理学研究中的特点、应用前景以及存在的问题。提出了分子毒理机制今后的研究方向。     

活性污泥系统优化设计对不确定性参数的灵敏度研究

在活性污泥系统优化设计模型参数不确定性分析的基础上,考察了进水负荷、生物动力学参数、曝气设备性能参数和二沉池浓缩常数变化对优化设计的影响。灵敏度分析结果表明,对优化设计影响较大的参数为：进水水量水质、与氧转移效率相关的校正参数以及二沉池的浓缩常数等。研究结果对于低灵敏度系统的设计,提高优化设计结果的工程实用性具有重要的意义。