Pb and Cd binding to natural freshwater biofilms developed at different pH: the important role of culture pH

The effects of solution pH on adsorption of trace metals to different types of natural aquatic solid materials have been studied extensively, but few studies have been carried out to investigate the effect of pH at which the solid materials were formed on the adsorption. The purpose of present study is to examine this effect of culture pH on metal adsorption to natural freshwater biofilms. The adsorption of Pb and Cd to biofilms which were developed at different culture pH values (ranging from 6.5 to 9.0) was measured at the same adsorption pH value (6.5). The culture pH had considerable effects on both composition and metal adsorption ability of the biofilms. Higher culture pH usually promoted the accumulation of organic material and Fe oxides in the biofilms. The culture pH also affected the quantity and species of algae in the biofilms. The adsorption of Pb and Cd to the biofilms generally increased with the increase of culture pH. This increase was minor at lower pH range and significant at higher pH range and was more remarkable for Cd adsorption than for Pb adsorption. The notable contribution of organic material to the adsorption at higher culture pH values was also observed. The profound impacts of culture pH on adsorption behavior of biofilms mainly resulted from the variation of total contents of the biofilm components and were also affected by the alteration of composition and properties of the components.     

Photodegradation of the antimicrobial triclocarban in aqueous systems under ultraviolet radiation

This work aimed to investigate the effectiveness of ultraviolet (UV) radiation on the degradation of the antimicrobial triclocarban (TCC). We investigated the effects of several operational parameters, including solution pH, initial TCC concentration, photocatalyst TiO₂ loading, presence of natural organic matter, and most common anions in surface waters (e.g., bicarbonate, nitrate, and sulfate). The results showed that UV radiation was very effective for TCC photodegradation and that the photolysis followed pseudo-first-order kinetics. The TCC photolysis rate was pH dependent and favored at high pH. A higher TCC photolysis rate was observed by direct photolysis than TiO₂ photocatalysis. The presence of the inorganic ions bicarbonate, nitrate, and sulfate hindered TCC photolysis. Negative effects on TCC photolysis were also observed by the addition of humic acid due to competitive UV absorbance. The main degradation products of TCC were tentatively identified by gas chromatograph with mass spectrometer, and a possible degradation pathway of TCC was also proposed.     

Degradation of bisphenol A in aqueous solution by persulfate activated with ferrous ion

Degradation of bisphenol A (BPA) in aqueous solution was studied with high-efficiency sulfate radical (SO₄ ^?·), which was generated by the activation of persulfate (S₂O₈ ^2?) with ferrous ion (Fe²⁺). S₂O₈ ^2? was activated by Fe²⁺ to produce SO₄ ^?·, and iron powder (Fe⁰) was used as a slow-releasing source of dissolved Fe²⁺. The major oxidation products of BPA were determined by liquid chromatography-mass spectrometer. The mineralization efficiency of BPA was monitored by total organic carbon (TOC) analyzer. BPA removal efficiency was improved by the increase of initial S₂O₈ ^2? or Fe²⁺ concentrations and then decreased with excess Fe²⁺ concentration. The adding mode of Fe²⁺ had significant impact on BPA degradation and mineralization. BPA removal rates increased from 49 to 97 % with sequential addition of Fe²⁺, while complete degradation was observed with continuous diffusion of Fe²⁺, and the latter achieved higher TOC removal rate. When Fe⁰ was employed as a slow-releasing source of dissolved Fe²⁺, 100 % of BPA degradation efficiency was achieved, and the highest removal rate of TOC (85 %) was obtained within 2 h. In the Fe⁰–S₂O₈ ^2? system, Fe⁰ as the activator of S₂O₈ ^2? could offer sustainable oxidation for BPA, and higher TOC removal rate was achieved. It was proved that Fe⁰–S₂O₈ ^2? system has perspective for future works.     

Functional groups of marine ciliated protozoa and their relationships to water quality

Ciliated protozoa (ciliates) play important ecological roles in coastal waters, especially regarding their interaction with environmental parameters. In order to increase our knowledge and understanding on the functional structure of ciliate communities and their relationships to environmental conditions in marine ecosystems, a 12-month study was carried out in a semi-enclosed bay in northern China. Samples were collected biweekly at five sampling stations with differing levels of pollution/eutrophication, giving a total of 120 samples. Thirteen functional groups of ciliates (A–M) were defined based on their specific spatio-temporal distribution and relationships to physico-chemical parameters. Six of these groups (H–M) were the primary contributors to the ciliate communities in the polluted/eutrophic areas, whereas the other seven groups (A–G) dominated the communities in less polluted areas. Six groups (A, D, G, H, I and K) dominated during the warm seasons (summer and autumn), with the other seven (B, C, E, F, J, L and M) dominating in the cold seasons (spring and winter). Of these, groups B (mainly aloricate ciliates), I (aloricate ciliates) and L (mainly loricate tintinnids) were the primary contributors to the communities. It was also shown that aloricate ciliates and tintinnids represented different roles in structuring and functioning of the communities. The results suggest that the ciliate communities may be constructed by several functional groups in response to the environmental conditions. Thus, we conclude that these functional groups might be potentially useful bioindicators for bioassessment and conservation in marine habitats.     

Presence of bacteria in aqueous solution influences virus adsorption on nanoparticles

Virus contamination in wastewater is usually accompanied by the existence of various bacteria. Nanoparticles (NPs) have been shown to efficiently remove virus. In this study, bacterial cells, supernatants, and cultures were harvested separately from three strains at the culture ages of 6 and 24 h, corresponding to the log and stationary phases, respectively. The aim is to investigate how their presence affects virus adsorption on the three Fe and Al oxide NPs (α-Fe₂O₃, γ-Fe₂O₃-B, and Al₂O₃) and how these effects change with bacterial growth phase. Bacteriophage phiX174 was used as a virus model. Results showed that bacterial cells, supernatants, and cultures harvested at 6 h generally reduced virus adsorption by an average of 0.75?±?0.84, 7.7?±?9.0, and 10.3?±?8.6 %, respectively, while those harvested at 24 h reduced virus adsorption by an average of 2.1?±?0.93, 21.5?±?6.6, and 24.6?±?6.9 %, respectively. Among the NPs, α-Fe₂O₃ showed more sensitivity to bacteria than the other two, probably because of its relatively higher value of point of zero charge. It was found that cell-induced and supernatant-induced reductions were combined to achieve added results, in which the supernatants contributed much more than the cells, implying that the bacterial exudates might be more crucial in the reduced virus adsorption than the bacterial cells. These results strongly demonstrated that the bacteria-induced reduction in virus adsorption became more significant with culture age. It is suggested that studies conducted in the absence of bacteria may not accurately evaluate the potential of virus removal efficiency of the NPs in bacteria-containing environments.     

Temporal patterns of atmospheric mercury species in northern Mississippi during 2011–2012: Influence of sudden population swings

Gaseous elemental mercury (GEM), gaseous oxidized mercury (GOM) and particulate bound mercury (PBM) were measured on the University of Mississippi campus from July 2011 to June 2012. It is believed to be the first time that concentrations of atmospheric mercury species have been documented in northern Mississippi, and at a location with relatively large and sudden swings in population. The mean concentration (±1SD) of GEM was 1.54 ± 0.32 ng m⁻³; levels were lower and generally more stable during the winter (1.48 ± 0.22) and spring (1.46 ± 0.27) compared with the summer (1.56 ± 0.32) and fall (1.63 ± 0.42). Mean concentrations for GOM and PBM were 3.87 pg m⁻³ and 4.58 pg m⁻³, respectively; levels tended to be highest in the afternoon and lowest in the early morning hours. During the fall and spring academic semesters concentrations and variability of GOM and PBM both increased, possibly from vehicle exhaust. There were moderate negative correlations with wind speed (all species) and humidity (GOM and PBM). Backward air mass trajectory modeling for the ten highest peaks for each mercury species revealed that the majority of these events occurred from air masses that passed through the northern continental US region. Overall, this study illustrates the complexity of temporal fluctuations of airborne mercury species, even in a small town environment.     

Hydroxylated polybrominated diphenyl ethers (OH-PBDEs) in biosolids from municipal wastewater treatment plants in China

Hydroxylated polybrominated diphenyl ethers (OH-PBDEs) along with methoxylated polybrominated diphenyl ethers (MeO-PBDEs) have been frequently identified as natural compounds in marine environment and also assumed as metabolites of PBDEs. In the present study, nine OH-PBDE, nine MeO-PBDE and 10 PBDE congeners were studied in the sewage sludge collected from 36 municipal wastewater treatment plants (WWTPs) in 27 cities of China. The results suggest that OH-PBDEs and PBDEs are ubiquitous in sewage sludge in China, however, methoxylated PBDEs were not detectable. Composition profiles of detected OH-PBDE congeners were different depending on the sampling location. ΣOH-PBDEs in WWTPs sludge ranged from 0.04 to 2.24 ng g^?1 dry weight (mean: 0.35 ng g^?1 dry weight). The total amount of the two most prominent congeners (6-OH-BDE-47 + 2′-OH-BDE-68) accounted for about 53.3–100% of the sum of all six identified congeners. A significant linear relationship was found between 6-OH-BDE-47 and 2′-OH-BDE-68. A distinct geographical distribution of ΣOH-PBDEs was observed with greater concentrations of OH-PBDEs at coastal areas than inland regions in China.     

碘掺杂Ti02可见光光催化性能研究

在低于100℃温度条件下,采用溶胶一凝胶法以钛酸正丁酯为钛源,碘酸钾为碘源,制备了I掺杂纳米TiO2催化剂（I-TiO2）,运用x-射线衍射（XRD）、透射电镜（TEM）及x-射线光电子能谱（XPS）等对催化剂进行表征,结果表明,TiO2及I-TiO2催化剂均为锐钛矿,I吸附并包裹在TiO2表面或以间隙进入的形式存在,并未进入TiO2晶格。通过在可见光照射下（A〉420nm）以罗丹明B（RhodamineB,RhB）的光催化降解为探针反应研究了在不同条件下制备催化剂的催化性能,结果表明,掺杂比为n1：n^ti=0．05：l,焙烧温度为400℃,降解介质条件pH=7时,l-TiO2光催化活性明显优于未掺杂的TiO2。光催化降解过程通过红外光谱（IR）,总有机碳（TOC）跟踪测定,比较了TiO2掺杂前后降解RhB和对氯苯酚（4-CP）的光催化特性差异;同时采用苯甲酸荧光光度法跟踪测定体系中的氧化物种,表明在可见光下,I-TiO2光催化体系中产生·OH高活性氧化物种从而氧化降解目标化合物。     

高效阿特拉津降解菌株DNS10降解条件优化

从长期施用阿特拉津的寒地黑土耕层(0～10 cm)土壤中筛选到一株能以除草剂阿特拉津为氮源生长的降解菌株,结合16S rRNA序列分析结果,将该菌株命名为Arthrobacter sp.DNS10。在接种量为108CFU/mL的条件下,菌株DNS10在24 h内对100 mg/L阿特拉津的降解率为99.41%。单因子实验结果表明,菌株DNS10适宜生长和降解的条件范围是:温度25～35℃,pH值5.0～8.0,培养液盐度0.1%～2%,对阿特拉津最大耐受浓度可达1 200 mg/L。正交实验法进一步表明,该菌株保持较好生长及降解能力的最优方案是温度30℃,pH值7.5,培养液盐度0.5%。影响其降解能力的环境因素的主次顺序依次是:温度>盐度>pH值。