改性纳米零价铁的制备及其去除水中的四环素

对聚乙烯吡咯烷酮(PVP-K30)改性纳米零价铁(NZVT)用于水中四环素(TC)的去除进行研究.通过XRD,TEM和BET对改性后的纳米铁性能进行表征.探讨不同反应条件对PVP-NZVI去除四环素的影响.实验结果表明,在制备过程中添加PVP-K30改性剂可以明显减小纳米铁颗粒粒径,增大比表面积,提高TC的去除率.当初...     

UASB-SBR工艺处理阿维菌素废水

采用UASB-SBR 组合工艺处理阿维菌素废水,考察了UASB 反应器和SBR 反应器中COD 的去除效果.UASB 反应器稳定运行阶段,当进水COD 为9 210 mg / L、容积负荷为9.21 kg（/ m3·d）时,COD 去除率稳定在85%左右.SBR 反应器稳定运行阶段,当进水COD 为1 010 mg /...     

Research on the Knowledge System Framework of Eco-industrial Engineering

With intensified contradiction between the rapid development of modern industry and the carrying capacity of natural environment,coordinating the relationship between economic benefits and ecological benefits is a significant issue to be solved for modern industrial engineering.This paper firstly conducts the comparative analysis between traditional and ecological industry as well as traditional and modern industrial engineering,and indicates that eco-industrial engineering is an inevitable choice for sustainable development of modern industrial engineering;Then,based on industrial ecology,environmental economics and sustainable development theory,the connotation and definition of ecoindustrial engineering are proposed,and the theoretical and practical development of the concepts of eco-industrial engineering are further investigated.Furthermore,the research subject,research content,academic system architecture and evaluation methods of eco-industrial engineering are discussed.Finally,combining the current scientific and technological development,we put forward the important scientific value and practical significance of constructing eco-industrial engineering for the utilization of these concepts.     

改性污泥活性炭对水中镉离子的吸附性能

以城市污水处理厂的剩余污泥为原料,氯化锌为活化剂制备污泥活性炭,对一部分污泥活性炭用6.0 mol/L的硝酸进行改性,并研究了未改性和改性的污泥活性炭对Cd2＋的吸附行为的影响。结果表明,在pH为5.0、Cd2＋初始浓度为100 mg/L、吸附剂投加量为2.0 g/L、反应温度为25℃时,未改性的污泥活性炭吸附容量为8.45 mg/g,硝酸改性的污泥活性炭吸附容量达到了23.35 mg/g。改性和未改性的污泥活性炭对Cd2＋都有较好的吸附容量,硝酸改性大幅度提高了污泥活性炭对Cd2＋的吸附性能。常温下改性污泥活性炭对Cd2＋的吸附符合Langmuir吸附等温式。     

市政污泥水热炭化废水组成成分特征

污泥水热炭化处理被认为是极具潜力的污泥安全处置与资源化利用的技术措施之一。为了解废水中碳、氮、磷、钾和重金属含量随水热炭化反应温度和反应时间的变化规律,对市政污泥190℃和260℃水热炭化不同时间（1、6、12、18和24 h）后的废水组成成分进行了研究。结果表明,水热炭化处理后,废水颜色由黑色变成浅黄色;pH由6.40提高到9.14;TOC、COD和BOD5最高分别增加了13 175 mg/L、55 998 O2mg/L和31 723 O2mg/L;氮和钾含量显著提高,但磷含量降低;Cd、Cr含量由未检测到分别增加到0.060 mg/L和2.326 mg/L,As、Pb含量均由0.032 mg/L分别增加到1.408 mg/L和0.590 mg/L,但Cu、Mn及Zn含量降低。比起反应时间,反应温度对废水组成成分的影响更大。     

柠檬酸浸出土壤中铜、锌的优化设计

以某工业废弃地土壤为供试材料,采用批次实验方法,研究了柠檬酸对重金属Cu、Zn的浸出效果。并在单因素实验基础上,探讨不同pH值、柠檬酸浓度、固液比和浸提时间等对浸出效果的影响,进而对实验条件进行正交优化组合,确定优化工艺参数为：pH值为3.2,柠檬酸浓度为0.4 mol/L,壤土固液比为1/10,土壤中Cu、Zn接近平衡的时间分别为1 h和1.5 h。结果表明,在此条件下,对这2种金属来说,Cu较Zn易释放,Cu、Zn的最大浸出率分别为74.8%和65.3%。柠檬酸浸提前后,土壤中有机质含量下降范围为0.61%~3.16%。单从土壤有机质含量来看,柠檬酸对土壤质量影响较小,具有较好的应用前景。     

Occurrence and fate of PPCPs and correlations with water quality parameters in urban riverine waters of the Pearl River Delta, South China

The occurrence and fate of eight PPCPs was studied in river waters from upstream to downstream of the three rivers in the Pearl River Delta, China. The correlations of PPCP levels and water quality parameters were also investigated. The analytes of the highest concentrations were caffeine, acetaminophen, and ciprofloxacin. Carbamazepine and erythromycin-H₂O were detected at the lowest concentrations. The highest concentrations of PPCPs were found in the Shijing River, with 865 ng/L caffeine, 339 ng/L acetaminophen, and 304 ng/L ciprofloxacin. In general, the levels of PPCPs in the Zhujiang River were higher at sites where the metropolitan city Guangzhou is located and decreased from the epicenter along the river. Low levels of PPCPs were generally found in the Beijiang River. Positive correlations were found between PPCP levels, total nitrogen, ammonium nitrogen, and cumulative fluorescence excitation-emission matrix (EEM) volume. Among the four PPCPs evaluated (caffeine, acetaminophen, ciprofloxacin, and sulfamethoxazole), caffeine had the best correlations with the correlation coefficients ranging from 0.62 to 0.98. The prediction of PPCP concentrations at specified locations can be substantially simplified.     

碘掺杂TiO2可见光光催化性能研究

在低于100℃温度条件下,采用溶胶-凝胶法以钛酸正丁酯为钛源,碘酸钾为碘源,制备了I掺杂纳米TiO2催化剂(I-TiO2),运用X-射线衍射(XRD)、透射电镜(TEM)及X-射线光电子能谱(XPS)等对催化剂进行表征,结果表明,TiO2及I-TiO2催化剂均为锐钛矿,I吸附并包裹在TiO2表面或以间隙进入的形式存在,并未进入TiO2晶格。通过在可见光照射下(λ>420 nm)以罗丹明B(Rhodamine B,RhB)的光催化降解为探针反应研究了在不同条件下制备催化剂的催化性能,结果表明,掺杂比为nI:nTi=0.05∶1,焙烧温度为400℃,降解介质条件pH=7时,I-TiO2光催化活性明显优于未掺杂的TiO2。光催化降解过程通过红外光谱(IR),总有机碳(TOC)跟踪测定,比较了TiO2掺杂前后降解RhB和对氯苯酚(4-CP)的光催化特性差异;同时采用苯甲酸荧光光度法跟踪测定体系中的氧化物种,表明在可见光下,I-TiO2光催化体系中产生.OH高活性氧化物种从而氧化降解目标化合物。     

低曝气下PAC强化SBR工艺同步脱氮除磷

采用序批式反应器(SBR)处理模拟生活污水,研究不同曝气量(30、24、18和12 L/h)下活性污泥同步脱氮除磷规律,并在最佳曝气量下,比较了粉末活性炭-序批式反应器(PAC-SBR)和SBR的脱氮除磷效率,分析了低曝气下PAC-SBR的运行特性和优越性。实验结果表明,当曝气量为24 L/h时,SBR内出水效果较好,其COD、TN和TP的平均去除率分别可以达到90.02%、81.13%和88.12%。在这个最佳曝气量下,PAC-SBR具有明显的优势,其COD、TN和TP的平均去除率均高于SBR,并且PAC-SBR具有较好的污泥沉降性能和较高的活性污泥浓度。在PAC-SBR中,活性污泥以PAC作为微生物载体强化了生物降解效果,并改善了低曝气下污泥絮体的结构,促使反应器内先后形成缺氧-厌氧-微氧/缺氧-缺氧的环境,利于同步硝化反硝化和反硝化聚磷,提高了PAC-SBR的同步脱氮除磷效率。     

粉煤灰沸石负载Ce^3＋／TiO2光催化降解水中的菲和荧蒽

以钛酸四丁酯为前驱体,粉煤灰合成沸石为载体,采用溶胶-凝胶方法,在低温条件下制备了稀土铈掺杂的TiO2光催化剂。利用SEM—EDS、XRD、FTIR对催化剂进行了分析和表征。以高压汞灯为灯源,对多环芳烃菲、荧蒽的降解进行了研究。实验考查了稀土铈掺杂质量分数、催化剂用量、溶液pH、目标物初始质量浓度等因素对光催化降解的影响,研究了其光降解动力学。结果表明,当稀土铈含量为0．5％,催化剂用量为3g／L,pH偏碱性时,催化效果最佳。光催化反应符合Langmuir—Hinshelwood动力学规律,菲、荧蒽的降解过程符合一级反应动力学,反应速率常数分别为0．0126min^-1,0．0099min^-1。