DIGITAL SIMULATION OF THE EFFECT OF THERMAL DISCHARGE ON STREAM WATER QUALITY1

A modified transient version of the Streeter-Phelps model along with the energy balance equation is employed to analyze the effects of waste heat discharge from power plants on stream water quality. Analysis is also made to examine the effects of the upstream water quality and stream velocity on the downstream DO concentration level. The resulting coupled nonlinear hyperbolic partial differential equations representing the energy, BOD and DO concentrations are solved by the method of characteristics and simulated on a digital computer. Final numerical results indicate that the allowable quantity of thermal discharge does heavily depend on the upstream quality.     

WATER QUALITY CONTROL BY ARTIFICIAL AERATION OF STREAM RECEIVING THERMAL AND ORGANIC WASTE DISCHARGES1

ABSTRACT: The purpose of this work is to study the installation of artificial aerators for water quality control of a stream which receives thermal and organic waste discharges. The location and numer of diffuser type aerators to be installed along the stream are determined so as to maintain the stream DO content above a certain minimum requirement (4 mg/l or 5 mg/l) for normal aquatic life. Effects of the stream velocity, upstream BOD concentration and rates of thermal and organic waste discharges to the stream are examined.     

Preliminary evaluation of PAH sorptive changes in soil by Soxhlet extraction

This study was conducted to evaluate the influence of sorbent modification by synthetic, chemical/thermal weathering on the sorptive behavior of polycyclic aromatic hydrocarbons (PAHs). A clean sandy-clay-loam soil was subjected to Soxhlet extraction and PAH sorptive phenomena were evaluated based on quantity and quality changes in soil organic matter (SOM) and clay minerals. Critical changes in sorption capacity were found to depend on the initial PAH concentrations. Above 7 mg/l, weathering increased the PAH in comparison to that of unmodified soil, whereas it decreased when applied below this concentration. Similarly, less PAH was desorbed from the altered soil when PAH was applied above 7 mg/l. Therefore, when PAH was applied below 7 mg/l, quantitative reduction of sorbent amount (i.e., SOM and clay minerals) by soil weathering governed PAH sorptive behavior. However, when the PAH was applied above the critical limit, qualitative modifications in the sorbents facilitated an opposite trend. Sorbent swelling, removal of competing compounds, and possible changes in surface characteristics by Soxhlet extraction, together with increased concentration gradient effects were factors that resulted in dissimilar PAH sorptive phenomena, pivoting at the critical concentration.     

Recovery of phosphates from wastewater using converter slag: Kinetics analysis of a completely mixed phosphorus crystallization process

A phosphorus crystallization process for recovering phosphates was developed using a completely mixed reactor and powdered converter slag as a seed crystal. This completely mixed phosphorus crystallization process achieved a stable and high phosphorus recovery: the average PO4-P removal efficiency during 200 d of operation was 87%, with a range of 70-98%. The apparent volume of the slag doubled due to crystal growth during the long-term phosphorus-removal experiments. The Ca2+ concentration, slag dosage, and temperature were found to govern the phosphorus recovery system for a given condition of pH and hydraulic retention time. The equations for the rate constant and reaction order were obtained by evaluating the model parameters. The model developed in this study was observed to successfully simulate the behavior of effluent PO4-P in a completely mixed phosphorus crystallization reactor over a wide variety of operating conditions of temperature, Ca2+ concentration, and influent PO4-P. Model investigations of design factors suggest that the completely mixed phosphorus crystallization process with influent PO4-P concentrations of less than 10 mg l(-1) could ensure effluent PO4-P concentrations of less than 0.5 and 1.0 mg l(-1) during summer and winter in Korea, respectively.     

Effects of riboflavin on the phototransformation of benzo[a]pyrene

Riboflavin (Vitamin B2) is a natural dye-sensitizer habitually present in natural waters. Effects of riboflavin as photosensitizer on the transformation of benzo[a]pyrene (BaP) (10 microM) in the aqueous-organic solvent (water/acetonitrile/methanol 50/40/10) were investigated in this study. The photolysis half life of BaP in solution containing 50 microM riboflavin was 5 min, compared to 98 min in the absence of riboflavin. The rate of phototransformation of BaP increased as the concentration of riboflavin was raised from 10 microM to 100 microM under both natural sunlight and UVA irradiation. The half life of BaP in the presence of 50 microM riboflavin was 10.6 min and 43.1 min when exposed to visible range of natural sunlight and UVA irradiation respectively. Riboflavin decomposes under natural sunlight. Lumichrome, a principal photoproduct of riboflavin, was shown to photosensitize BaP under natural sunlight after photolysis of riboflavin. Our study indicated that other photoproducts from riboflavin, such as lumiflavin, were also involved in the phototransformation of BaP under sunlight when riboflavin diminished. The major photoproducts in the photolysis of BaP were identified as 1,6-benzo[a]pyrene-dione, 3,6-benzo[a]pyrene-dione, 6,12-benzo[a]pyrene-dione by using high performance liquid chromatography (HPLC). All these products were detected in the samples which were irradiated under different light sources and in the presence or absence of riboflavin. The possible phototransformation mechanism was discussed.     

A critical exploration of blood and environmental chromium concentration among oral cancer patients in an oral cancer prevalent area of Taiwan

The growing incidence of oral cancer (OC) in Taiwan has become a crucial public health concern. In particular, Changhua, a county in central Taiwan, carries persistently high OC incidence rate, with an alarmingly high male/female ratio of OC incidence. Previous epidemiological studies had found that the incidence is spatially correlated with the level of soil content to certain heavy metals in the central Taiwan area. Soil and the human body both intake environmental heavy metals, which can be absorbed through various ways. The soil metal concentration is an index of possible environmental exposure to heavy metal, and the blood metal concentration somewhat reflects the level of the exposure on the human body. Metallic carcinogen is likely to generate free radicals and play a role in many cancers, and many studies had reported that environmental exposure to heavy metals is an important risk factor for developing cancer. Studies on animals showed that chronic intake of chromium (Cr) could induce OC. This study aims to explore the association between the Cr concentration in the farm soil and in the blood of OC patients. We recruited 79 OC patients from Changhua County, with their lifestyle being adjusted in regression analysis. The results showed that the Cr concentration in the blood of OC patients is significantly higher than the background value, and is positively associated with the Cr concentration in the soil surrounding their residence (p-value < 0.023). Because Changhua County is only with moderate prevalence of the known OC habitual risk factors, an environmental factor related to heavy metal Cr exposure is suspected. Future investigations may verify the causal relation between Cr and OC.     

A CFD study of the transport and fate of airborne droplets in a ventilated office: The role of droplet−droplet interactions

• Coulomb and Lennard−Jones forces were considered for droplet interactions. • The net droplet interactions were repulsive. • Repulsive droplet interactions increased the transport of droplets. • Repulsive droplet interactions significantly modified the fate of droplets. Previous studies reported that specially designed ventilation systems provide good air quality and safe environment by removing airborne droplets that contain viruses expelled by infected people. These water droplets can be stable in the environment and remain suspended in air for prolonged periods. Encounters between droplets may occur and droplet interactions should be considered. However, the previous studies focused on other physical phenomena (air flow, drag force, evaporation) for droplet transport and neglected droplet interactions. In this work, we used computational fluid dynamics (CFD) to simulate the transport and fate of airborne droplets expelled by an asymptomatic person and considered droplet interactions. Droplet drag with turbulence for prediction of transport and fate of droplets indicated that the turbulence increased the transport of 1 μm droplets, whereas it decreased the transport of 50 μm droplets. In contrast to only considering drag and turbulence, consideration of droplet interactions tended to increase both the transport and fate. Although the length scale of the office is much larger than the droplet sizes, the droplet interactions, which occurred at the initial stages of release when droplet separation distances were shorter, had a significant effect in droplet fate by considerably manipulating the final locations on surfaces where droplets adhered. Therefore, it is proposed that when an exact prediction of transport and fate is required, especially for high droplet concentrations, the effects of droplet interactions should not be ignored.     

An individual-based model to study the reproduction of egg bearing copepods: Application to Eurytemora affinis (Copepoda Calanoida) from the Seine estuary,France

Limited empirical studies have elucidated the daily egg production and associated reproductive processes of egg bearing copepod. Herein, we present an individual-based model which constitutes a realistic representation of the reproduction in egg bearing copepods. The model has been parameterized using an extensive set of experimental data obtained from the literature and from the laboratory and field experiments on the estuarine copepod Eurytemora affinis. The proposed model takes into account the adult female longevity, the clutch size and interclutch duration, which is a function of egg maturation time and latency time required by the female after egg hatching to produce a new clutch. The embryonic development time and hatching success are also taken into account. The effect of temperature on the means and variances of above-mentioned reproductive parameters has been also incorporated. A multi agent system based generic platform “Mobidyc” has been used to generate and calibrate the model. The model demonstrates the reproductive parameters of females of E. affinis which is validated through individual based experiments. Temperature specific simulations provide a dynamical explanation of temperature effect on the cumulative egg production. The daily survival principally affects the number of clutches produced per female during its life span. The results obtained in the present study by combining temperature and survival effects reveal the relatively greater importance of the first factor on the daily egg production of egg-carrying copepods. The present model is generic and hence easily applicable to other animals with comparable reproductive strategy.     

Characteristics of fungal flora in onion farmlands with potential link to human mycotic keratitis

Acquisition of mycotic keratitis has been linked to agricultural activities. Although fungi were identified in injured eyes, data derived directly from farmlands are limited. Following five cases of fungal corneal ulcers in onion harvesters in the monsoon area of Taiwan, the present study further determined fungi genera and their concentrations in onion crops and surface soils of onion farmlands. In total, 52, 100 and 100 samples of soils, onion leaves and bulb scales, respectively, were collected from three monsoon and one non-monsoon farmlands. Fungal colonies were counted and microscopically examined after incubation at 25°C for 4–7 days on malt extract agar with 40?g?mL^?1 chloramphenicol. Results showed the peak fungi levels were mostly observed at harvest time. Among keratitis-related fungi, Aspergillus predominated in soils as well as in onion bulb scales, while Alternaria in onion leaves. Cladosporium was also prevalent in soils, onion leaves and scales. Other keratitis-related fungi included Acremonium, Curvalaria, Fusarium, Mycelia, Penicillium, Rhizoctonia and Rhizopus. The present study provides an exposure link between onion harvesters and presence of keratitis-related fungi from onion crops and soils, which may account for mycotic ocular infection via hand-to-eye contact and airborne transmission during the monsoon season.     

Design and use of group-specific primers and probes for real-time quantitative PCR

Real-time quantitative polymerase chain reaction (qPCR) has gained popularity as a technique to detect and quantify a specific group of target microorganisms from various environmental samples including soil, water, sediments, and sludge. Although qPCR is a very useful technique for nucleic acid quantification, accurately quantifying the target microbial group strongly depends on the quality of the primer and probe used. Many aspects of conducting qPCR assays have become increasingly routine and automated; however, one of the most important aspects, designing and selecting primer and probe sets, is often a somewhat arcane process. In many cases, failed or non-specific amplification can be attributed to improperly designed primer-probe sets. This paper is intended to provide guidelines and general principles for designing group-specific primers and probes for qPCR assays. We demonstrate the effectiveness of these guidelines by reviewing the use of qPCR to study anaerobic processes and biologic nutrient removal processes. qPCR assays using group-specific primers and probes designed with this method, have been used to successfully quantify 16S ribosomal Ribonucleic Acid (16S rRNA) gene copy numbers from target methanogenic and ammonia-oxidizing bacteria in various laboratory- and full-scale biologic processes. Researchers with a good command of primer and probe design can use qPCR as a valuable tool to study biodiversity and to develop more efficient control strategies for biologic processes.