Partitioning and removal of dioxin-like congeners in flue gases treated with activated carbon adsorption

Activated carbon adsorption is commonly used to control dioxin-like congener (PCDD/Fs and PCBs) emissions. Partitioning of PCDD/Fs and PCBs between vapor and solid phases and their removal efficiencies achieved with existing air pollution control devices (APCDs) at a large-scale municipal waste incinerator (MWI) and an industrial waste incinerator (IWI) are evaluated via intensive stack sampling and analysis. Those two facilities investigated are equipped with activated carbon injection (ACI) with bag filter (BF) and fixed activated carbon bed (FACB) as major PCDD/F control devices, respectively. Average PCDD/F and PCB concentrations of stack gas with ACI+BF as APCDs are 0.031 and 0.006ng-TEQ/Nm(3), and that achieved with FACB are 1.74 and 0.19ng-TEQ/Nm(3) in MWI and IWI, respectively. The results show that FACB could reduce vapor-phase PCDD/Fs and PCBs concentrations in flue gas, while the ACI+BF can effectively adsorb the vapor-phase dioxin-like congener and collect the solid-phase PCDD/Fs and PCBs in the meantime. Additionally, the results of the pilot-scale adsorption system (PAS) experimentation indicate that each gram activated carbon adsorbs 105-115ng-PCDD/Fs and each surface area (m(2)) of activated carbon adsorbs 10-25ng-PCDD/Fs. Based on the results of PAS experimentation, this study confirms that the surface area of mesopore+macropore (20-200A) of the activated carbon is a critical factor affecting PCDD/F adsorption capacity.     

Prediction for energy content of Taiwan municipal solid waste using multilayer perceptron neural networks

In the past decade, the treatment amount of municipal solid waste (MSW) by incineration has increased significantly in Taiwan. By year 2008, approximately 70% of the total MSW generated will be incinerated. The energy content (usually expressed by lower heating value [LHV]) of MSW is an important parameter for the selection of incinerator capacity. In this work, wastes from 55 sampling sites, including villages, towns, cities, and remote islands in the Taiwan area, were sampled and analyzed once a season from April 2002 to March 2003 to determine the waste characteristics. The LHV of MSW in Taiwan was predicted by the multilayer perceptron (MLP) neural networks model using the input parameters of elemental analysis and dry- or wet-base physical compositions. Although all three of the models predicted LHV values rather accurately, the elemental analysis model provided the most accurate prediction of LHV values. Additionally, the wet-base physical composition model was the easiest and most economical. Therefore, the waste treatment operators can choose the more appropriate analysis method considering situations themselves, such as time, equipment, technology, and cost.     

2003年夏秋季大气环流异常对西北地区降水的影响

根据2003年6～10月西北地区118站逐日降水资料,对该地区、该时段的大气环流及其对该地区降水的影响进行了分析研究.     

隧道内偏置火源顶棚近壁面温度边界层效应研究

基于隧道火灾不同横向火源位置的非对称卷吸影响,通过模拟计算分析了中心火源和偏置火源产生的烟气沿纵向最大温升变化规律,研究了顶棚下方近壁面区域内的不同温度分布,提出偏置火源纵向空间最大顶棚温升公式。结果表明:在壁面黏性作用下,沿纵向蔓延的烟气最高温度在顶棚下方呈现“温度边界层”分布;随着火源位置的偏移,下游出现偏置距离起主导作用影响温度衰减的区域,衰减速度相较于中心火源逐渐降低;火源下游近壁面最高温度位置逐渐远离顶棚后趋于稳定。研究结果对于排烟方式的设计以及空间通风效果的提升有着重要意义。     

Thermal hazard accident investigation of hydrogen peroxide mixing with propanone employing calorimetric approaches

Hydrogen peroxide (H₂O₂), historically, due to its broad applications in the chemical industries, has caused many serious fires and explosions around the world. Its thermal hazards may also be incurred by an incompatible reaction with other chemicals, and a runaway reaction may be induced in the last stage. This study applied thermal analytical methods to explore the H₂O₂ leading to these accidents by incompatibility and to discuss what might be formed by the upset situations. Thermal hazard analysis contained a solvent, propanone (CH₃COCH₃, so-called acetone), which was deliberately selected to mix with H₂O₂ for investigating the degree of thermal hazard. Differential scanning calorimetry (DSC) and vent sizing package 2 (VSP2) were employed to evaluate the thermal hazard of H₂O₂. The results indicated that H₂O₂ is highly hazardous while mixed with propanone, as a potential contaminant. The time to maximum rate (TMR) was used as emergency response time in the chemical industries. Therefore, TMR of H₂O₂ was calculated to be 70 min for runaway reaction (after T₀) and TMR of H₂O₂/propanone was discovered to be 27 min only. Fire and explosion hazards could be successfully lessened if the safety-related data are properly imbedded into manufacturing processes.     

移动通风槽技术在攀钢炼铁高炉矿槽除尘系统的应用

采用移动通风槽技术对攀钢炼铁高炉矿槽除尘系统槽上原有吸尘点进行改造,改造后达到节能减排、降低成本的目的,具有一定的经济效益及环境效益.     

冷空气在北上台风“利奇马”致灾暴雨中的作用分析

利用NCEP逐6 h再分析资料、地面加密观测、探空、雷达资料,分析得出“利奇马”致灾暴雨是在长时间稳定维持的天气尺度环流背景下形成的。冷空气在降水所起的作用表现在:(1)长时间维持的弱冷空气与偏南暖湿气流交汇形成了边界层辐合线,辐射升温和暖湿气流的输送加大了辐合线两侧的温度和露点梯度,在高温高湿的有利环境下,对流在辐合线附近强烈发展。(2)高空槽后冷空气由“利奇马”环流西北侧渗入,先后形成3个冷平流中心,分别对应3个阶段的降水。(3)冷暖空气在降水区的持续辐合抬升作用增强了降水,最强降水时段发生在锋区垂直方向坡度最大的时段。(4)水平锋生有利于水汽输送和辐合抬升,垂直锋生有利于对流不稳定能量的累积和触发。冷空气形成的水平辐合和抬升造成大范围上升运动,使得锋生和垂直锋消同时存在,最强降水时段发生在水平锋生最强的时段。     

天津城市化发展趋向与水资源可持续利用

分析了新时期天津城市化发展趋向，从城市人口增长、城市工业结构、城市化进程等诸方面，探讨了城市化进程与水资源利用之间的关系，提出了适应城市化发展的水资源可持续利用战略。     

用连续提取法研究芘在鱼鳃表面的结合形态

建立了研究鱼鳃表面芘的结合状态的四步连续提取方法．分别用H2O、CaCl2、CH3OH和n-C6H14+CH2Cl2(1:1, v/v)混合液提取经暴露的鱼鳃．操作定义的前3步分别提取松散附着在鳃表的鱼鳃黏液中的芘,紧密附着在鳃表的鱼鳃黏液中的芘以及直接吸着在鱼鳃表皮上的芘,第4步则用来提取鱼鳃组织吸收的芘．其提取的芘分别占总量的 4．0％、12．1％、45．2％和38．7％．经3 h暴露,进入鳃组织的芘仅为总测定量的三分之一强,因此大部分芘并未进入鳃组织．单独进行的五步CH3OH连续提取实验结果证明,CH3OH提取步骤能有效地解吸鳃表吸着的芘,但不会导致鳃组织中芘的释放．动态实验结果表明,黏液结合态芘在暴露1h左右即达到平衡,而鳃表吸着态和鳃组织吸收态芘在暴露3h内含量迅速上升,3 h后显著趋缓．