自然水体中主要有毒有机物的研究进展

介绍了主要有毒有机物多环芳烃(PAHs)、多氯联苯(PCBs)、有机氯农药(OCPs)在环境中的危害及其来源,着重评述了近年来中国自然水体中和沉积物中该类污染物的研究进展,指出新的检测技术的开发、有毒有机物的生殖毒性和生态环境风险影响方法学的研究及污染区域污染控制、消减及修复是今后该领域的工作重点.     

铁-镍交联改性膨润土的制备及应用

以钠基膨润土为原料,制备了铁-镍无机交联、铁-镍有机交联系列改性膨润土,比较了二者对废水的COD、色度、浊度和废水中Cr^6＋的去除效果;考察了改性嘭润土加入量、pH、搅拌时间等因素对实验结果的影响。结果表明,铁-镍有机交联改性嘭润土对Cr^6＋的去除效果明显好于铁-镍无机交联改性膨润土,对COD的去除效果略好于铁-镍无机交联改性膨润土;铁-镍无机交联改性膨润土对废水浊度的去除效果略好于铁-镍有机交联改性膨润土;二者对色度的去除效果相当。吸附行为符合Langmuir方程。     

负载型纳米TiO2光催化剂的制备及其光催化活性

采用悬浮聚合法制备粉煤灰-聚苯乙烯微珠载体,通过矿化接枝技术将水热法制备的纳米TiO2负载在粉煤灰-聚苯乙烯微珠载体上,制成负载型纳米TiO2光催化剂。用x射线衍射仪、扫描电子显微镜对负载型纳米TiO2光催化剂进行了表征;通过光催化降解甲醛实验评价了负载型纳米TiO2光催化剂的活性。实验结果表明,纳米TiO2在载体上分散良好,平均粒径为36．4nm;该催化剂活性较高,明显优于粉体纳米TiO2光催化剂,重复使用10次左右,该催化剂的活性无明显下降。     

钾细菌在剩余污泥资源化中的应用

通过对钾细菌在剩余污泥中的接种,利用钾细菌将土壤中难溶性钾转化为可溶性钾是增加作物钾素营养的一个途径,将含大量钾细菌的剩余污泥制成的微生物肥料应用于农田中,从而达到剩余污泥的资源化利用,为剩余污泥的科学处理提供依据。     

济南市环境、社会、经济协调发展评价

建立了济南市城市环境、社会、经济协调评价指标体系,采用多目标二级决策方法对各指标的权重进行分配;在已有协调度计算方法的基础上,构建了协调度的计算公式;并运用该指标体系和协调度公式对济南市环境、社会经济协调状况进行评判。结果表明济南市的环境、社会经济之间发展是不平衡的,协调状况为中级协调水平;环境综合指数较低,表明环境的建设滞后于社会经济的发展。     

低有机负荷下三槽式氧化沟运行参数的调整实践

由于唐山某污水处理厂进水的有机负荷远低于设计运行进水条件,致使三槽氧化沟运行不正常。针对这种情况,对低有机负荷状态下三槽式氧化沟的运行参数进行了调整,探索出了低有机负荷状态下三槽式氧化沟的运行模式。     

碾子山区生态区建设规划特点分析

本文着重介绍了碾子山区生态区建设规划的总体结构、生态经济区建设及保证措施等方面特点。     

Identification of main influencing factors of life cycle CO2 emissions from the integrated steelworks using sensitivity analysis

The amount of CO₂ emissions from steelworks accounts for a great share of the total CO₂ emissions from industry in China. Thus, reducing CO₂ emissions from steelworks is urgent for China's environmental protection and sustainable development. This study aims at identifying factors that influence CO₂ emissions from steelworks and proposing measures to reduce CO₂ emissions. The life cycle inventory (LCI) of iron and steel products implies the relationship between the CO₂ emissions of the steelworks and the input variables of the LCI. The Tornado Chart Tool is utilized to calculate the variation of CO₂ emissions caused by the change of each input variables of LCI. Then, mean sensitivity of each input variable is calculated and the ranking criterion developed is used to identify the main factors influencing the integrated steelworks. Subsequently, measures for reducing CO₂ emissions are proposed. The results indicate that the very important influencing factors of CO₂ emissions in steelworks are the CO₂ emission factor of Blast Furnace Gas (BFG), liquid steel unit consumption of continuous casting, continuous casting slab unit consumption of hot rolling and hot metal ratio of steel making. Consequently, many efficient measures for reducing CO₂ emissions have been proposed, such as removing CO₂ contained in BFG, decreasing the hot metal ratio of Basic Oxygen Furnace (BOF), recycling BFG, optimizing the products' structure, etc.     

Study on mechanics of crowd jam based on the cusp-catastrophe model

Some characteristics of crowd jam like the phenomena of discontinuous jumping in reality are hard to be explained by the equations governing pedestrians. The catastrophe theory can explain these characteristics. A cusp-catastrophe model is developed to analyze the mechanics of crowd jam by drawing graphs for a cusp-catastrophe model of crowd, the bifurcation set and the projection of catastrophe model. Meanwhile, the critical density and the critical velocity are derived. It is concluded that the cusp model is a more efficient predictor than the linear model or the equations governing pedestrians and is reasonably realistic for dense crowd flow scenarios.     

荒漠化类型划分及其数量化评价体系

从我国荒漠化监测的实际需要出发，提出了包括气候区、外营力、土地利用类型、地表特征和荒漠化程度在内的多因素复叠式荒漠化分类体系；既可适用于小区域大比例尺的重点监测，又可适用于大区域小比例尺的宏观监测的各荒漠化类型数量化程度判定指标体系和判定方法；适用于各级行政区的荒漠化水平评价方法．