高温状态下受热时间对膨润土物性指标的影响∗

高温状态下膨润土的物性指标变化是高放核废物深地质处置库设计的重要参数之一。通过高温状态下不同受热时间MX80钠基膨润土的比重、液塑限、自由膨胀率试验,研究了受热时间对膨润土基本物性指标的影响规律;并通过热重分析(TGA)、X衍射(XDR)、电镜扫描(SEM)试验,从微观角度对上述变化规律进行了合理解释。研究结果表明:随着受热时间的增加,膨润土的比重、液塑限、自由膨胀率在受热15～30天内急剧下降,降幅分别为2.5%、3.1%和28.3%,之后各值变化量很小;高温状态下,膨润土的矿物成分转化、结合水脱附、微观形貌改变是膨润土物性指标发生变化的根本原因,三者之间相互作用和彼此影响。     

FRP加固震损RC柱建模方法及骨架模型研究

为研究震损RC柱采用FRP(Fiber Reinforced Polymer,FRP)加固修复后的抗震性能,本文基于OpenSees仿真平台,根据震后RC柱的表观损伤状态提出FRP加固震损RC柱的有限元模型建立方法。对FRP加固震损RC柱进行5120种工况的Pushover分析,采用三折线荷载-位移骨架曲线,研究损伤状态对骨架曲线特征点参数的影响规律,并通过数据回归分析提出FRP加固震损RC柱的骨架曲线计算模型。分析结果表明:损伤会降低FRP加固RC柱的承载力及刚度,且降低程度随损伤指数的增大而增加,两者近似成抛物线关系;在DS-5损伤状态下,相比于FRP加固完好RC柱,FRP加固震损RC柱的屈服承载力P y、峰值承载力P c、弹性刚度K 1、弹塑性刚度K 2及下降段刚度K 3的均值下降17.9%、14.5%、41.8%、43.1%和19.9%;损伤对FRP加固RC柱弹性刚度和弹塑性刚度的降低程度明显高于屈服承载力和峰值承载力;文中提出的FRP加固震损RC柱骨架曲线计算模型具有较高精度。     

快速高效去除微囊藻的GO/QPEI复合纳米材料

本研究合成了一种新型高效的去除铜绿微囊藻(Microcystis aeruginosa)的氧化石墨烯/季铵盐聚乙烯亚胺(GO/QPEI)纳米复合材料.GO/QPEI在pH为4~10的条件下都具有高效去除M.aeruginosa的能力,其去除能力在2 min内可达96%以上.GO/QPEI对微囊藻的吸附更符合Freundlich方程,最大吸附量为5.58×1011cells·mg-1.吸附动力学表明GO/QPEI的假二级吸附反应.GO纳米片和QPEI的协同效应是其高效去除微囊藻的主要机制.     

Compositions and sources of organic acids in fine particles (PM2.5) over the Pearl River Delta region, south China

Organic acids as important constituents of organic aerosols not only influence the aerosols' hygroscopic property, but also enhance the formation of new particles and secondary organic aerosols. This study reported organic acids including C14–C32fatty acids, C4–C9dicarboxylic acids and aromatic acids in PM2.5collected during winter 2009 at six typical urban, suburban and rural sites in the Pearl River Delta region. Averaged concentrations of C14–C32fatty acids, aromatic acids and C4– C9 dicarboxylic acids were 157, 72.5 and 50.7 ng/m3, respectively. They totally accounted for 1.7% of measured organic carbon. C20–C32fatty acids mainly deriving from higher plant wax showed the highest concentration at the upwind rural site with more vegetation around, while C14–C18fatty acids were more abundant at urban and suburban sites, and dicarboxylic acids and aromatic acids except 1,4-phthalic acid peaked at the downwind rural site. Succinic and azelaic acid were the most abundant among C4–C9dicarboxylic acids, and 1,2-phthalic and 1,4-phthalic acid were dominant aromatic acids. Dicarboxylic acids and aromatic acids exhibited significant mutual correlations except for 1,4-phthalic acid, which was probably primarily emitted from combustion of solid wastes containing polyethylene terephthalate plastics. Spatial patterns and correlations with typical source tracers suggested that C14–C32fatty acids were mainly primary while dicarboxylic and aromatic acids were largely secondary. Principal component analysis resolved six sources including biomass burning, natural higher plant wax, two mixed anthropogenic and two secondary sources; further multiple linear regression revealed their contributions to individual organic acids. It turned out that more than 70% of C14–C18fatty acids were attributed to anthropogenic sources, about 50%–85% of the C20–C32fatty acids were attributed to natural sources, 80%–95% of dicarboxylic acids and 1,2-phthalic acid were secondary in contrast with that 81% of 1,4-phthalic acid was primary.     

南京市黑臭河流水体中细菌多样性的研究

以南京市城南河为研究对象,分别提取上中下游的水体样本,分析水质中的氮、磷、COD等水质指标,并利用变性梯度凝胶电泳技术(DGGE)分析了城南河不同位置的细菌多样性。结果表明:城南河水体中的平均总氮为30.06 mg/L,总磷为6.14 mg/L,COD为42.03 mg/L,均超过国家V类水质标准。结合外观,城南河属于严重污染的典型黑臭河流。DGGE分析的结果表明:城南河具有较高的细菌多样性,优势菌群主要是变形菌门和拟杆菌门2大类群,且不同取样点细菌种类差别不大。     

电厂燃煤锅炉颗粒物分段去除效率及成因分析

选取某大型发电企业进行实测,根据测试数据计算颗粒物去除装置对颗粒物的分段去除效率。结果表明:静电除尘器除尘效率为99.91%、湿法脱硫装置除尘效率为60.51%、湿法脱硫装置出口相对静电除尘器进口的颗粒物去除效率为99.61%、湿法脱硫装置出口颗粒物浓度是静电除尘器出口颗粒物浓度的4.18倍。此外,也依据计算结果并结合实际情况分析了影响各除尘段颗粒物去除效率的主要成因,这些成因主要包括各除尘段功能、脱硫剂与脱硫副产品的颗粒物、脱硫装置运行平稳性等,期望本研究成果能对电厂燃煤锅炉大气污染控制设施关系调整、重新设计及大气环境污染治理思路调整提供重要科学依据与指导。     

浅谈热泵技术在兖矿集团的应用

通过对兖矿集团所属煤矿供暖小区的现状以及能耗进行调查、分析,本文就如何采用先进的热泵技术,对矿区燃煤小锅炉进行节能技术改造展开探讨,对类似节能改造有较高借鉴作用。     

突发公共事件应急交通研究综述

突发公共事件下的应急交通管理与控制问题是当前交通领域的一个研究热点。本文介绍了国内外有关应急交通领域的研究现状,对突发公共事件的概念进行了归纳总结,分析了突发公共事件下的应急交通行为;概述了数学分析方法和计算机仿真模拟应急交通疏散的研究成果,从逆向车道设计、交通分流、分阶段交通疏散、交通信号控制、平行应急管理与控制等方面对突发公共事件下的应急交通控制策略进行了分析;最后指出了有待进一步深入研究和探索的问题。     

Financing for innovative technologies and best practices to reduce persistent organic pollutants

Persistent Organic Pollutants (POPs) threaten human health and the global environment. Recognizing their dangers many countries began to limit or ban POPs production, use, and release in the 1990s. Eventually the Stockholm Convention on POPs, was adopted in 2001 and entered into force in 2004. The Global Environment Facility (GEF) provides financial support to developing country Parties for the implementation of the Stockholm Convention. The GEF’s POPs investment portfolio focuses on: 1) strengthening the capacity of developing country Parties to implement the Stockholm Convention; 2) establishing and supporting partnerships to develop and implement National Implementation Plans (NIPs), and 3) demonstrating and deploying best technologies and practices to reduce POPs emission, including development of safe alternatives. Since 2001 the GEF has committed US$568.8 million to POPs projects and leveraged some US$1474.5 million in co-financing from partners in the public and private sectors, bringing the total value of the GEF POPs portfolio to over US$2 billion. With GEF support, 108 developing country Parties have developed their NIPs. The GEF also financed 109 projects for the implementation of the Convention. Upon completion, these GEF POPs investments will contribute to the disposal of more than 70,000 tons of Polychlorinated Biphenyls (PCBs) oil, contaminated equipments, and waste, more than 40,000 tons of obsolete POPs pesticides and associated waste, and reducing dioxin/furan and mercury emission by introducing environmentally sound technologies and best practices. This paper summarizes: 1) direct and indirect GEF investments to support the goals of the Stockholm Convention; 2) investment case studies on PCB, DichloroDiphenylTrichloroethane (DDT), chlordane and mirex, medical waste, obsolete POPs and engaging civil society; and 3) lessons learned in terms of GEF financing strategies, best technologies and environmental practices to address POPs.     

光学气体成像技术在泄漏检测与维修中的应用研究

通过介绍光学气体成像技术的原理、泄漏检测与维修关键技术、甲烷气体泄漏检测与识别实验情况,讨论了该技术在石化生产过程中的应用发展趋势。