1025t/h四角切圆煤粉炉内空气过量系数对NO生成的影响

文章采用计算流体力学软件Fluent数值模拟了1 025 t/h四角切圆煤粉炉内的湍流扩散燃烧,分析了空气过量系数对炉内烟气速度、烟气温度和氮氧化物组分的影响。结果表明:空气过量系数会对炉内流场的空气动力学特性和温度场分布均匀性产生显著影响。煤粉炉膛最佳空气过量系数为1.07,此时炉内温度场、速度场和浓度场的分布可使燃烧中间产物HCN和NH_3较好的将燃料型NO还原为N_2,来充分发挥空气分级燃烧降低NO排放的功效。     

某钢铁企业颗粒物无组织排放核算与监测对比分析

以济南东部老工业区一家大型钢铁企业为例,通过前期调研和排放系数核算出颗粒物(TSP)排放总量,再运用公式计算出厂区周边不同距离颗粒物(TSP)的落地浓度。将该落地浓度与厂区周边颗粒物(TSP)的监测值进行对比分析,充分印证了连续点源扩散的高斯模式的准确性和可行性。随着气流经过该厂区,对比上下风向监测点位颗粒物(TSP)浓度迅速升高(增大1.04倍),下风向颗粒物(TSP)浓度超出二级标准1.32倍;颗粒物(TSP)的落地浓度在厂区不同距离上的浓度变化明显,从0.1到10 km其落地浓度稀释了约3 500倍,距离>4 km时,无组织排放的颗粒物(TSP)对周围空气质量直接影响有限。     

我国工业危险废物的来源、处理及监管对策与建议

通过大量环境统计数据的分析,对我国工业危险废物的产生、综合利用、处置和贮存,从行业来源、区域分布进行了分析和总结。结合我国工业危险废物企业自建设施和政府集中处理设施处理情况,对我国工业危险废物的处理和环保监管对策提出了若干建议。     

京津冀区域燃煤发电行业大气污染物排放时空变化特征研究

为了科学评估京津冀区域燃煤发电行业特别排放限值和超低排放相关要求实施后的大气污染物减排效果,以行业调查数据为基础,建立了2013年和2015年京津冀区域燃煤发电行业大气污染物排放清单,分析了装机容量与SO_2、NO_x和烟尘排放量的时空耦合关系,讨论了国家相关政策和标准的实施效果。结果显示:区域内2015年燃煤机组装机容量与2013年相比略有下降,SO_2、NO_x和烟尘排放量分别下降75.95%、83.09%和71.20%,减排效果明显。2015年100 MW以下等级机组3种污染物排放总量位居各机组首位,建议通过多种合理方式压减小型燃煤发电机组数量和排放浓度。     

Effects of sludge retention time, carbon and initial biomass concentrations on selection process: From activated sludge to polyhydroxyalkanoate accumulating cultures

Four sequence batch reactors (SBRs) fed by fermented sugar cane wastewater were continuously operated under the aerobic dynamic feeding (ADF) mode with different configurations of sludge retention time (SRT), carbon and initial biomass concentrations to enrich polyhydroxyalkanoate (PHA) accumulating mixed microbial cultures (MMCs) from municipal activated sludge. The stability of SBRs was investigated besides the enrichment performance. The microbial community structures of the enriched MMCs were analyzed using terminal restriction fragment length polymorphism (T-RFLP). The optimum operating conditions for the enrichment process were: SRT of 5 days, carbon concentration of 2.52 g COD/L and initial biomass concentration of 3.65 g/L. The best enrichment performance in terms of both operating stability and PHA storage ability of enriched cultures (with the maximum PHA content and PHA storage yield (Y_PHA/S) of 61.26% and 0.68 mg COD/mg COD, respectively) was achieved under this condition. Effects of the SRT, carbon concentration and initial biomass concentration on the PHA accumulating MMCs selection process were discussed respectively. A new model including the segmentation of the enrichment process and the effects of SRT on each phase was proposed.     

Effects of free ammonia on volatile fatty acid accumulation and process performance in the anaerobic digestion of two typical bio-wastes

The effect of free ammonia on volatile fatty acid(VFA)accumulation and process instability was studied using a lab-scale anaerobic digester fed by two typical bio-wastes:fruit and vegetable waste(FVW)and food waste(FW)at 35°C with an organic loading rate(OLR)of 3.0 kg VS/(m~3·day). The inhibitory effects of free ammonia on methanogenesis were observed due to the low C/N ratio of each substrate(15.6 and 17.2,respectively). A high concentration of free ammonia inhibited methanogenesis resulting in the accumulation of VFAs and a low methane yield. In the inhibited state,acetate accumulated more quickly than propionate and was the main type of accumulated VFA. The co-accumulation of ammonia and VFAs led to an "inhibited steady state" and the ammonia was the main inhibitory substance that triggered the process perturbation. By statistical significance test and VFA fluctuation ratio analysis,the free ammonia inhibition threshold was identified as 45 mg/L. Moreover,propionate,iso-butyrate and valerate were determined to be the three most sensitive VFA parameters that were subject to ammonia inhibition.     

Amoxicillin effects on functional microbial community and spread of antibiotic resistance genes in amoxicillin manufacture wastewater treatment system

This study aimed to reveal how amoxicillin(AMX) affected the microbial community and the spread mechanism of antibiotic resistance genes(ARGs) in the AMX manufacture wastewater treatment system. For this purpose, a 1.47 L expanded granular sludge bed(EGSB) reactor was designed and run for 241 days treating artificial AMX manufacture wastewater. 454 pyrosequencing was applied to analyze functional microorganisms in the system. The antibiotic genes OXA_(-1), OXA_(-2), OXA_(-10), TEM_(-1), CTX-M_(-1), class I integrons(intI1) and 16 SrRNA genes were also examined in sludge samples. The results showed that the genera Ignavibacterium, Phocoenobacter,Spirochaeta, Aminobacterium and Cloacibacillus contributed to the degradation of different organic compounds(such as various sugars and amines). And the relative quantification of eachβ-lactam resistance gene in the study was changed with the increasing of AMX concentration.Furthermore the vertical gene transfer was the main driver for the spread of ARGs rather than horizontal transfer pathways in the system.     

Mesoporous carbon nanomaterials induced pulmonary surfactant inhibition, cytotoxicity, inflammation and lung fibrosis

Environmental exposure and health risk upon engineered nanomaterials are increasingly concerned. The family of mesoporous carbon nanomaterials(MCNs) is a rising star in nanotechnology for multidisciplinary research with versatile applications in electronics,energy and gas storage, and biomedicine. Meanwhile, there is mounting concern on their environmental health risks due to the growing production and usage of MCNs. The lung is the primary site for particle invasion under environmental exposure to nanomaterials. Here, we studied the comprehensive toxicological profile of MCNs in the lung under the scenario of moderate environmental exposure. It was found that at a low concentration of 10 μg/mL MCNs induced biophysical inhibition of natural pulmonary surfactant. Moreover, MCNs at similar concentrations reduced viability of J774 A.1 macrophages and lung epithelial A549 cells.Incubating with nature pulmonary surfactant effectively reduced the cytotoxicity of MCNs.Regarding the pro-inflammatory responses, MCNs activated macrophages in vitro, and stimulated lung inflammation in mice after inhalation exposure, associated with lung fibrosis.Moreover, we found that the size of MCNs played a significant role in regulating cytotoxicity and pro-inflammatory potential of this nanomaterial. In general, larger MCNs induced more pronounced cytotoxic and pro-inflammatory effects than their smaller counterparts. Our results provided valuable information on the toxicological profile and environmental health risks of MCNs, and suggested that fine-tuning the size of MCNs could be a practical precautionary design strategy to increase safety and biocompatibility of this nanomaterial.     

恶臭污染排放源指纹谱编制及初步应用

为了识别恶臭污染源排放特征以及了解不同行业恶臭物质排放差异,对恶臭污染排放源指纹谱指标物质进行了筛选,并依据筛选结果对6家典型恶臭排放企业进行样品采集及分析,绘制了各家企业的指纹谱图.结果表明:①通过物质嗅觉阈值与AMGE（ambient multimedia environmental goals,周围环境目标值）和RfC（reference concentration,健康风险参考浓度）对比以及结合国内外恶臭标准受控物质和现有的标准检测方法,最终确定了包括三甲胺、硫化氢、甲硫醇等典型恶臭物质在内的19种物质作为指纹谱指标物质.②依据我国现行的标准监测分析方法对19种恶臭指标物进行检测,初步得到了各家企业的恶臭物质指纹谱数据,绘制了各家企业的指纹谱图.③指纹谱成分分析结果显示,污水处理厂主要的恶臭物质是硫化氢,ρ（硫化氢）为44.566 mg/m3;涂料企业ρ（甲基乙基酮）、ρ（丁醛）和ρ（乙酸乙酯）较高,分别为39.037、28.757、27.840 mg/m3;制药企业ρ（丙醛）较高,为4.791 mg/m3;汽车和家具制造企业ρ（二甲苯）较高,分别为15.209和2.081 mg/m3.④应用分歧系数法分析不同企业指纹谱之间的相似程度,分析结果显示,分歧系数在0.331~0.809之间,不同企业之间指纹谱存在较大差异.研究显示,建立恶臭污染排放源指纹谱可进行恶臭源排放特征识别,为恶臭污染溯源提供基础数据和科学依据.      

深圳湾沉积物重金属污染时空分布特征

根据1992~2013年间深圳湾沉积物的监测数据,重点分析了重金属砷（As）、镉（Cd）、铬（Cr）、铜（Cu）、铅（Pb）、汞（Hg）和锌（Zn）含量、来源、相关性、污染程度和生态风险等污染状况。深圳湾沉积物中重金属含量存在明显的时空分布特征。1992~2013年间,深圳湾尤其是近岸海域,沉积物重金属含量的基本变化趋势为先增加后下降,重金属含量在2000~2009年间相对较高;Cd、Cr、Cu、Pb、Hg和Zn的含量从湾内到湾口逐渐降低。重金属Cu、Pb、Zn和As的富集因子指数较高,说明这4种重金属主要来自人类活动。Cd、Cr、Cu、Pb和Zn之间存在明显的相关性,具有相似污染途径和迁移过程。深圳湾底泥中重金属Pb、Zn和Cu属于轻微污染程度,其他重金属为无污染程度。深圳湾沉积物重金属的生态危害程度为轻微生态风险,重金属中Hg的生态风险指数最高,As和Cd次之。