珠江三角洲经济区污水系统设计原则

分析了珠江三角洲经济区水环境现状；阐述了城市污水分散处理与集中处理的利弊；指出污水深度处理与回用是形成良性水循环的有效途径，更是经济可持续发展的必然要求；通过对已建排水系统存在问题的分析，探讨了珠江三角洲经济开发区污水系统的设计原则，认为污水系统规划要改变传统设计方法，应方便再生水回用，由经济、技术、地理等综合因素确定排水分区、污水厂厂址与数量，选择适合各排水区域水质水量的工艺流程，预留污水厂与再生水回用管线分期发展的空间，应优先选用国产污水处理设备，尽可能维持城市河涌自然生态。     

基于可接受安全间距的单车道交通流模拟模型

交通流微观模拟是采用计算机对交通流进行描述及分析的方法。尤其对于复杂的交通流而言,微观模拟具有明显的优势,然而模拟的准确与否,关键在于模型的建立。笔者即是在研究我国单车道交通流特点的基础上,借鉴车道变换理论,基于驾驶员可接受的交通安全间距,分析安全变换车道的各间距之间的关系,阐述了有超车的单车道交通流模拟模型的建立方法     

水源热泵空调系统的水质处理技术

针对影响水源热泵系统运行效能的地下水水质和回灌过程中井堵塞的问题,提出相应的水质处理方法和水源热泵用地下水水质参考标准.     

JYZ-1型烟气浊度在线监测仪介绍

介绍了JYZ-1型烟气浊度在线监测仪的测量原理、特点及其在环境监测中的应用。     

大力发展循环经济促进宁阳县可持续发展

宁阳县发展循环经济过程中所取得的初步成果,同时对当前存在的突出问题,提出了相应的对策和改进措施:制定促进循环经济发展的相关政策;构筑循环经济基本模式,推动建立生态工业园;建立循环经济发展的技术支撑体系;制定发展循环经济的长远规划;提高全民发展循环经济意识和公众参与水平.     

西部复杂性地貌地区消防规划评估与建设研究 ——以凉山州区域为例

城市消防规划作为城市消防安全体系建设的重要依据,是助力城市现代化进程、推动城市综合安全智慧网络形成的重要基石。通过对凉山州各地貌地区消防现状存在问题的分析,结合凉山州的实际情况及全州建设发展多种形式综合性消防应急救援队伍的需要,提出了能满足全州消防安全需求且能够有效指导城市消防建设的相应对策。     

页岩气加砂压裂高压管汇失效爆裂风险 控制措施研究与实践

随着页岩气平台井工厂化压裂施工启动,在大排量、高压力、长时间施工条件下,高压管汇失效爆裂大幅增加。为减少高压管汇在压裂过程中失效爆裂风险,运用故障假设、因果分析法从人的因素、物的因素、技术工艺、生产管理、工作环境5个方面分析事故的原因,提出了提升采购产品质量、修订完善高压管汇使用技术规范和管理制度、实施专业化管理、应用大数据管理高压管汇、优化现场地面高压管汇流程分配布局设计与联接工艺等高压管汇失效爆裂风险预防控制措施和失效后应急安全防护措施,建立了生命周期全过程、专业化的高压管汇失效爆裂防控与应急防护体系,实现风险可防受控。为页岩气压裂作业的安全提供了参考。     

Short-duration hydrothermal fermentation of food waste: preparation of soil conditioner for amending organic-matter-impoverished arable soils

Environmental Science and Pollution Research - Soil conditioners can be used to compensate for the insufficient soil nutrition and organic matter (OM) of arable soils. However, the traditional...     

Determination of 27 pharmaceuticals and personal care products (PPCPs) in water: The benefit of isotope dilution

• Isotope dilution method was developed for the determination of 27 PPCPs in water. • The established method was successfully applied to different types of water samples. • The correction effect of corresponding 27 ILSs over 70 d was investigated. • Benefit of isotopic dilution method was illustrated for three examples. Pharmaceuticals and personal care products (PPCPs) are a unique group of emerging and non-persistent contaminants. In this study, 27 PPCPs in various water samples were extracted by solid phase extraction (SPE), and determined by isotope dilution method using liquid chromatography coupled to tandem triple quadruple mass spectrometer (LC-MS/MS). A total of 27 isotopically labeled standards (ILSs) were applied to correct the concentration of PPCPs in spiked ultrapure water, drinking water, river, effluent and influent sewage. The corrected recoveries were 73%–122% with the relative standard deviation (RSD)<16%, except for acetaminophen. The matrix effect for all kinds of water samples was<22% and the method quantitation limits (MQLs) were 0.45–8.6 ng/L. The developed method was successfully applied on environmental water samples. The SPE extracts of spiked ultrapure water, drinking water, river and wastewater effluent were stored for 70 days, and the ILSs-corrected recoveries of 27 PPCPs were obtained to evaluate the correction ability of ILSs in the presence of variety interferences. The recoveries of 27 PPCPs over 70 days were within the scope of 72%–140% with the recovery variation<37% in all cases. The isotope dilution method seems to be of benefit when the extract has to be stored for long time before the instrument analysis.     

Bio-drying and size sorting of municipal solid waste with high water content for improving energy recovery

Bio-drying can enhance the sortability and heating value of municipal solid waste (MSW), consequently improving energy recovery. Bio-drying followed by size sorting was adopted for MSW with high water content to improve its combustibility and reduce potential environmental pollution during the follow-up incineration. The effects of bio-drying and waste particle size on heating values, acid gas and heavy metal emission potential were investigated. The results show that, the water content of MSW decreased from 73.0% to 48.3% after bio-drying, whereas its lower heating value (LHV) increased by 157%. The heavy metal concentrations increased by around 60% due to the loss of dry materials mainly resulting from biodegradation of food residues. The bio-dried waste fractions with particle size higher than 45 mm were mainly composed of plastics and papers, and were preferable for the production of refuse derived fuel (RDF) in view of higher LHV as well as lower heavy metal concentration and emission. However, due to the higher chlorine content and HCl emission potential, attention should be paid to acid gas and dioxin pollution control. Although LHVs of the waste fractions with size <45 mm increased by around 2× after bio-drying, they were still below the quality standards for RDF and much higher heavy metal pollution potential was observed. Different incineration strategies could be adopted for different particle size fractions of MSW, regarding to their combustibility and pollution property.