The BOR syndrome and renal agenesis-prenatal diagnosis andfurther clinical delineation

This is the first report of prenatal diagnosis of a fetus with brachio-oto-renal dysplasia (BOR) syndrome with right-sided renal agenesis and severe left hypoplasia. The father of this fetus had malformed external ears, a left-sided preauricular pit and branchial cyst, and bilateral mild to moderate deafness without a demonstrable renal anomaly. This family highlights the variable expressivity seen in the autosomal dominant BOR syndrome, the importance of genetic counselling for families with BOR syndrome, and the aetiologic heterogeneity of renal agenesis.     

Spontaneous resolution of a cystic hygroma in a fetus with Turner syndrome

The prenatal detection of a cystic hygroma (CH) in a fetus with a 45,X karyotype is described. The cystic hygroma underwent spontaneous resolution and a healthy baby with Turner syndrome was subsequently born. The implications for genetic counselling are discussed.     

Selenium Distribution in Topsoils and Plants of a Semi-arid Mediterranean Environment

Selenium was determined from 25 topsoils and 25 plants in the semi-arid Central Spain where large extents of soils are developed on evaporitic materials. Some species of vegetation associated with them are of the genera Astragalus, Salsola, Mercurialis, Phlomis, Thymus and Atriplex. Total selenium in soils was determined and its bioavailability assessed by chemical sequential fractionation. Se content in soils was adequate (in the range 0.17–0.39 mg kg⁻¹) or large (in the range 0.50–4.38 mg kg⁻¹) and appeared in highly and/or potentially available forms. Several plant species showed high Se levels (in the range 5–14.3 mg kg⁻¹), which can be a potential risk of toxicity to animals. Data obtained from the study area can be used as a guide to the range of values in soils and plants of the European Mediterranean area that are relatively unpolluted from industrial sources, allowing comparison with more polluted areas.     

Combustion sources of particles. 1. Health relevance and source signatures

Combustion processes result in generation of a large number of particle and gaseous products that create health and environmental risks. Of particular importance are the very small particles that are emitted in large quantities from all the combustion sources, and that have been shown to be potentially more significant in terms of their impact on health than larger particles. To control and mitigate the particles with a view of health and environmental risk reduction, a good understanding is necessary of the relative and absolute contribution from the emission sources to the airborne concentrations. This understanding could only be achieved by developing source signature libraries through direct emission measurements from the sources on one hand, and by measuring particle concentrations in the air, and apportioning them to the specific local and distant sources using the signatures, on the other hand. This paper is a review of particle characteristics that are used as source signatures as well as their general advantages and limitations. The second part of the paper reviews source signatures of the most common combustion pollution sources.     

Biomarker approach to evaluating the impact of scientific stations on the Antarctic environment using Trematomus bernacchii as a bioindicator organism

A biomonitoring study was performed to evaluate the human impact on two small coves adjacent to the Italian Scientific Station at Terra Nova Bay in November 1995. The study used the fish species Trematomus bernacchii as a bioindicator organism for a biomarker analysis based on porphyrin levels, and BPMO (Benzo(a)pyrene MonoOxygenase) and EROD (Ethoxyresorufin-O-deethylase) activities. Porphyrin levels and EROD and BPMO activities were found to be generally low. In contrast to previous years, no statistically significant difference was found between the potentially contaminated cove and the control cove after the Italian expedition had been active nearby for a period of one month. This indicates a marked decrease in certain types of contaminants such as organochlorines and trace metals, mainly due to improvements in waste disposal.     

Control of ozone precursors in a complex industrial terrain by using multiscale-nested air quality models with fine spatial resolution (1 km2)

The location of the northeastern Iberian Peninsula (NEIP) in the northwestern Mediterranean basin, the presence of the Pyrenees mountain range (with altitudes > 3000 m), and the influence of the Mediterranean Sea and the large valley canalization of Ebro river induce an extremely complicated structure for the dispersion of photochemical pollutants. Air pollution studies in very complex terrains such as the NEIP require high-resolution modeling for resolving the very complex dynamics of flows. To deal with the influence of larger-scale transport, however, high-resolution models have to be nested in larger models to generate appropriate initial and boundary conditions for the finer resolution domains. This article shows the results obtained through the utilization of the MM5-EMICAT2000-CMAQ multiscale-nested air quality model relating the sensitivity regimes for ozone (O3)-nitrogen oxides (NOx)-volatile organic compounds (VOCs) in an area of high geographical complexity, like the industrial area of Tarragona, located in the NEIP. The model was applied with fine temporal (one-hour) and spatial resolution (cells of 24 km, 2 km, and 1 km) to represent the chemistry and transport of tropospheric O3 and other photochemical species with respect to different hypothetical scenarios of emission controls and to quantify the influence of different emission sources in the area. Results indicate that O3 chemistry in the industrial domain of Tarragona is strongly sensitive to VOCs; the higher percentages of reduction for ground-level O3 are achieved when reducing by 25% the emissions of industrial VOCs. On the contrary, reductions in the industrial emissions of NOx contribute to a strong increase in hourly peak levels of O3. At the same time, the contribution of on-road traffic and biogenic emissions to ground-level O3 concentrations in the area is negligible with respect to the pervasive weight of industrial sources. This analysis provides an assessment of the effectiveness of different policies for the control of emission of precursors by comparing the modeled results for different scenarios.     

Combustion sources of particles: 2. Emission factors and measurement methods

Emissions from the combustion of biomass and fossil fuels are a significant source of particulate matter (PM) in ambient outdoor and/or indoor air. It is important to quantify PM emissions from combustion sources for regulatory and control purposes in relation to air quality. In this paper, we review emission factors for several types of important combustion sources: road transport, industrial facilities, small household combustion devices, environmental tobacco smoke, and vegetation burning. We also review current methods for measuring particle physical characteristics (mass and number concentrations) and principles of methodologies for measuring emission factors. The emission factors can be measured on a fuel-mass basis and/or a task basis. Fuel-mass based emission factors (e.g., g/kg of fuel) can be readily used for the development of emission inventories when the amount of fuels consumed are known. Task-based emission factors (g/mile driven, g/MJ generated) are more appropriate when used to conduct comparisons of air pollution potentials of different combustion devices. Finally, we discuss major shortcomings and limitations of current methods for measuring particle emissions and present recommendations for development of future measurement techniques.     

Use of O2 consumption and CO2 production in kinetic cells to delineate pyrite oxidation-carbonate buffering and microbial respiration in unsaturated media

Identifying zones of sulphide oxidation and carbonate buffering is important in the development of a management plan for mine waste-rock piles. In this study, we used a kinetic cell technique to measure rates of O2 consumption and CO2 production in low sulphide (<0.12 wt.% S), low inorganic carbon (<0.20 wt.% C(inorganic)), gneissic waste rock and associated organic-rich lake sediment (0.7 wt.% C(organic)), and forest soil (1.4 wt.% C(organic)) collected from the Key Lake uranium mine in Saskatchewan, Canada. Solid chemistry, stable carbon isotope, pore water sulphate concentration data, and stoichiometric considerations indicated that O2 consumption and CO2 production were constrained by microbial respiration in the lake sediment and forest soil and by pyrite oxidation-carbonate buffering in the gneissic waste rock. Mean ratios of molar CO2 production to O2 consumption rates were 0.5 for lake sediment, 0.7 for forest soil, and 0.2 for gneissic waste rock. The different O2/CO2 ratios suggested that O2-CO2 monitoring may provide a practical tool for identifying the zones of microbial respiration and pyrite oxidation-carbonate buffering in mine waste-rock piles. Rates of O2 consumption and CO2 production were about one order of magnitude greater in lake sediment than in gneissic waste rock, indicating that microbial respiration would exert a control on the distribution of O2 and CO2 gas in waste-rock piles constructed upon the dewatered lake sediments.     

Development of the IM147: an alternative inspection/maintenance mass-emission transient test to address vehicle preconditioning concerns

A series of studies was performed to develop an alternative to the U.S. Environmental Protection Agency's gold standard IM240 mass-based emission test. The new IM147 test was based on the second phase of the IM240 that consists of 147 sec of transient vehicle operation. Paired IM240/IM147 tests were conducted on vehicles ranging from 1981 to 1996 to determine IM147 cutpoints and excess emissions were identified. Additionally, an optimized test procedure was developed that combined possible triplicate IM147s with improved drive trace quality control, fast-pass, and retest methods. The optimized procedure was found to provide improved vehicle preconditioning with a relatively minor decrease in excess emissions identification. Resulting identification rates ranged from 96 to 100% for hydrocarbons (HC), 93-100% for CO, and 93-100% for NOx, depending on cutpoint selection, while false failures caused by lack of vehicle preconditioning were reduced to essentially zero. Significant vehicle throughput improvements were achieved through the development of software algorithms involving modal fast-pass and retest procedures. Modal drive trace variation limits also were developed to improve test accuracy. The combination of the algorithms reduced average IM147 test times by nearly 60%.     

Dissipation of oxytetracycline, chlortetracycline, tetracycline and doxycycline using HPLC-UV and LC/MS/MS under aquatic semi-field microcosm conditions

A mixture of four tetracyclines; oxytetracycline (OTC), chlortetracycline (CTC), tetracycline (TC), and doxycycline (DC) was applied in fifteen 12000l outdoor microcosms at four treatment levels plus controls each with three replicates (n = 3). The dissipation times of parent compounds were monitored and half-lives (DT50) of 1-4 days, depending on treatment level were recorded. This is in accordance with half-lives from previous findings in bench-top experiments. Parent compound DT50, were determined using HPLC-UV. Furthermore, the samples were analyzed for ten different tetracycline products using LC/MS/MS. Two products were found for chlortetracycline; 4-epi-anh-chlortetracyline and the iso-chlortetracycline. Iso-forms were only found for CTC and only at the highest treatment (300 microg l(-1)). The half-lives, trajectories, and relative amounts of the products were analogous for all four tetracyclines. DT50 for products were less than 1.2 days. Formation of 4-epi-anh-tetracyclines, occurred at neutral to weak alkaline conditions.