Review of Light-Duty Diesel and Heavy-Duty Diesel Gasoline Inspection Programs

Abstract

Emissions from diesel vehicles and gas-powered heavyduty vehicles are becoming a new focus of many inspection and maintenance (I/M) programs. Diesel particulate matter (PM) is increasingly becoming more recognized as an important health concern, while at the same time, the public awareness of diesel PM emissions because of their visibility have combined to increase the focus on diesel emissions in the United States. This has resulted in an increased interest by some states in including heavy-duty vehicle testing in their I/M program.

This paper provides an overview of existing I/M programs focused on testing light-duty diesel vehicles, heavyduty diesel vehicles, and heavy-duty gasoline vehicles (HDGVs). Information on 39 I/M programs in 27 different states in the United States plus 9 international inspection programs is included. Information on the status of diesel emissions technology and current test procedures is also presented. The goal is to provide useful information for air quality managers as they work to decide whether such I/M programs would be worth pursuing in their respective areas and in evaluating the emissions measurement technology to be used in the program. Testing of HDGVs is generally limited to idle testing, because dynamometer testing of these vehicles is not practical, and most were not certified on a chassis basis.

Testing of diesel vehicles has mostly been limited to SAE J1667 “snap-idle” opacity testing. Cost-effective technology for measuring diesel emissions currently does not exist, and, therefore, opacity-type measurements, although not effective at reducing the pollutants of most significant health concern, will continue to be used.     

Control of Ozone Precursors in a Complex Industrial Terrain by Using Multiscale-Nested Air Quality Models with Fine Spatial Resolution (1 km2)

Abstract

The location of the northeastern Iberian Peninsula (NEIP) in the northwestern Mediterranean basin, the presence of the Pyrenees mountain range (with altitudes >3000 m), and the influence of the Mediterranean Sea and the large valley canalization of Ebro river induce an extremely complicated structure for the dispersion of photochemical pollutants. Air pollution studies in very complex terrains such as the NEIP require high-resolution modeling for resolving the very complex dynamics of flows. To deal with the influence of larger-scale transport, however, high-resolution models have to be nested in larger models to generate appropriate initial and boundary conditions for the finer resolution domains. This article shows the results obtained through the utilization of the MM5-EMICAT2000-CMAQ multiscale-nested air quality model relating the sensitivity regimes for ozone (O₃)-nitrogen oxides (NO_x)-volatile organic compounds (VOCs) in an area of high geographical complexity, like the industrial area of Tarragona, located in the NEIP. The model was applied with fine temporal (one-hour) and spatial resolution (cells of 24 km, 2 km, and 1 km) to represent the chemistry and transport of tropospheric O₃ and other photochemical species with respect to different hypothetical scenarios of emission controls and to quantify the influence of different emission sources in the area. Results indicate that O₃ chemistry in the industrial domain of Tarragona is strongly sensitive to VOCs; the higher percentages of reduction for ground-level O₃ are achieved when reducing by 25% the emissions of industrial VOCs. On the contrary, reductions in the industrial emissions of NO_x contribute to a strong increase in hourly peak levels of O₃. At the same time, the contribution of on-road traffic and biogenic emissions to ground-level O₃ concentrations in the area is negligible with respect to the pervasive weight of industrial sources. This analysis provides an assessment of the effectiveness of different policies for the control of emission of precursors by comparing the modeled results for different scenarios.     

Influence of usage and chemical–physical properties on the atmospheric transport and deposition of pesticides to agricultural regions of Manitoba,Canada

This study quantified the masses of 14 pesticides deposited as wet (precipitation) versus dry (gaseous and particle) atmospheric deposition at a research farm in southwestern Manitoba, Canada. The concentration in air of these pesticides was also measured. Total bulk deposition amounts (wet + dry) ranged from 0.009 to 2.3 μg m^?2 for the 12 pesticides detected, and for the six pesticides with both wet and dry deposition detections, dry deposition contributed 12–51% of the total deposition over the crop growing season. Although not applied at the site, eight herbicides registered for use in Canada, as well as lindane (γ-HCH), were all frequently detected (92–100%) in the 12 air samples analyzed during the crop growing season, with by-product isomer α-HCH (75%), clopyralid (50%) and atrazine (8%) detected to a lesser extent. The chemical’s physicochemical properties and the relative mean mass of each agricultural pesticide applied in the province of Manitoba and in a 13 km radius were significant parameters in explaining the trends in the concentrations of pesticides detected in our samples. The important contribution of dry deposition to total pesticide deposition warrants greater attention in arid and semi-arid areas such as the Prairie Region of Canada, also because under a changing climate this region is estimated to experience more severe droughts while the more favorable conditions predicted for pest infestations could lead to increased pesticide applications in agricultural and urban areas.     

Reductive dechlorination of a chlorinated solvent plume in Houston,Texas

Chlorinated solvents such as tetrachloroethene (perchloroethene, PCE) and trichloroethene (TCE) have been extensively used in various industrial applications for many years. Because neither are typically consumed through their various uses, they are often released to the environment through industrial application or disposal. Once released, PCE and TCE tend to migrate downward into groundwater, where they persist. In the current case study, cheese whey was used as a groundwater amendment to facilitate the reductive dechlorination of a chlorinated solvent plume underlying an auto dealer/repair shop in Harris County, Texas. From September 2010 to January 2014, over 32,000 gallons of cheese whey were injected into the subsurface resulting in a marked reduction in oxidation–reduction potential (ORP) and nitrate concentrations, coupled with an increase in ferrous iron concentrations. Statistical trend analyses indicate the primary contaminants, PCE and TCE, as well as the daughter product cis‐1,2‐dichloroethene (cDCE), all exhibited a positive response, as evidenced by statistically decreasing trends, and/or reversal in concentration trends, subsequent to cheese whey injections. Maximum concentrations of PCE and TCE in key test wells decreased by as much as 98.97 percent and 99.17 percent, respectively. In addition, the bacterial genus Dehalococcoides, capable of complete reduction of PCE to non‐toxic ethene, was found to be more abundant in the treatment area, as compared to background concentrations. Because cheese whey is a by‐product of the cheese making process, the cost of the product is essentially limited to transport. This study demonstrates cheese whey to be an effective groundwater amendment at a cost which is orders of magnitude lower than popular industry alternatives.     

Evolution and Innovation of Hydraulic Capture Analysis Methodology

An efficient program for assessing groundwater extraction system capture zones has been developed that can be run on any digitized potentiometric surface. The program was developed in response to the need to simulate particle capture by multiple remediation system elements (i.e., extraction wells, hydraulic barrier, etc.) at a hydrogeologically complex site in California (the Site). The method uses MODPATH software but does not otherwise require a groundwater model. The program called “CapZone FileBuilder” (Capture Zone File Builder) Version 1.0 was created to import digitized potentiometric surfaces and use them to create MODFLOW output files (using native USGS MODFLOW‐2005 codes). CapZone FileBuilder was created using the C# programming language with Visual Studio 2013 as the integrated development environment. The model was applied to a site that has a regulatory requirement for capture analysis as part of an annual remedy‐effectiveness evaluation for groundwater contamination. Previously, capture analysis was highly labor intensive and time consuming, performed using manual flow net analysis or calibration of highly discretized MODFLOW groundwater models. CapZone FileBuilder is now used to perform the capture analysis for this site and is universally applicable to any site with a groundwater potentiometric map. ©2017 Wiley Periodicals, Inc.     

Inorganic nanoparticles enhance the production of reactive oxygen species (ROS) during the autoxidation of L-3,4-dihydroxyphenylalanine (L-dopa)

Public concerns over the toxicity of nanoparticles (NPs) are growing due to the rapid development of nanotechnology. An important mechanism of nanotoxicity is oxidative stress resulting from reactive oxygen species (ROS). In this study, the chemical production of ROS by inorganic NPs oxidizing the mammalian phenolic compound, l-3,4-dihydroxyphenylalanine (l-dopa) was evaluated using a ROS sensitive dye, 2′,7′-diclorodihydrofluorescin (DCFH). CeO₂, Fe₂O₃ and Fe⁰ NPs enhanced ROS production during the autoxidation of l-dopa by more than four-fold in reactions that were dependent on O₂. This is the first report of chemical ROS production due to interaction of phenolic compounds with NPs. Mn₂O₃ oxidized DCFH in a reaction that did not require O₂ or l-dopa, suggesting a direct redox reaction between the Mn₂O₃ and the dye. CeO₂, Mn₂O₃ and to a lesser extent Fe⁰ formed clear electron paramagnetic resonance (EPR) signature for hydroxyl radicals when incubated in aerobic aqueous suspensions with spin traps. The results indicate that NPs can generate ROS via chemical reactions with medium components and biomolecules susceptible to oxidation, such as l-dopa. NPs were reactive whereas micron-sized particles were not. The combined assay with l-dopa and DCFH is a method proposed to screen for chemical ROS production by NPs.     

Geographic and trophic patterns of OCs in pelagic seabirds from the NE Atlantic and the Mediterranean: a multi-species/multi-locality approach

Trophic ecology and geographic location are crucial factors explaining OC levels in marine vertebrates, but these factors are often difficult to disentangle. To examine their relative influence, we analyzed PCBs, DDTs and stable-nitrogen isotope signatures (δ15N) in the blood of 10 pelagic seabird species across 7 breeding localities from the northeast Atlantic and western Mediterranean. Large scale geographic patterns emerged due to the confined character and greater historical OC inputs in the Mediterranean compared to the Atlantic basin. Spatial patterns also emerged at the regional scale within the Atlantic basin, probably associated with long-range pollutant transport. Trophic ecology, however, was also a major factor explaining OC levels. We found clear and consistent OC differences among species regardless of the sampled locality. However, species δ15N and blood OC levels were not correlated within most breeding localities. Petrel species showed significantly greater OC burdens than most shearwater species but similar trophic positions, as indicated by their similar δ15N signatures. This pattern probably results from Petrel species feeding on mesopelagic fish and squid that migrate close to the sea surface at night, whereas shearwater species mainly feed on epipelagic diurnal prey. In sum, this study illustrates the lasting and unequal influence of past human activities such as PCB and DDT usage across different marine regions. In addition, our results suggest that multi-species designs are powerful tools to monitor geographic patterns of OCs and potentially useful to assess their vertical dynamics in the marine environment.