Total quality practitioner. Improving environmental process

Quick fix. Putting out firs. Do it over. Fix it again. Bottlenecks. Come back to it later. Out of stock. Back order. Not what we ordered. Is that the best you can do? It's the contractor's fault. Not within specs. Defective. Nobody's perfect. Lost in the system. Over budget. Delayed. Late penalities. Fines.     

Spatial variability of soil phosphorus in relation to the topographic index and critical source areas: sampling for assessing risk to water quality

A measure of soil P status in agricultural soils is generally required for assisting with prediction of potential P loss from agricultural catchments and assessing risk for water quality. The objectives of this paper are twofold: (i) investigating the soil P status, distribution, and variability, both spatially and with soil depth, of two different first-order catchments; and (ii) determining variation in soil P concentration in relation to catchment topography (quantified as the "topographic index") and critical source areas (CSAs). The soil P measurements showed large spatial variability, not only between fields and land uses, but also within individual fields and in part was thought to be strongly influenced by areas where cattle tended to congregate and areas where manure was most commonly spread. Topographic index alone was not related to the distribution of soil P, and does not seem to provide an adequate indicator for CSAs in the study catchments. However, CSAs may be used in conjunction with soil P data for help in determining a more "effective" catchment soil P status. The difficulties in defining CSAs a priori, particularly for modeling and prediction purposes, however, suggest that other more "integrated" measures of catchment soil P status, such as baseflow P concentrations or streambed sediment P concentrations, might be more useful. Since observed soil P distribution is variable and is also difficult to relate to nationally available soil P data, any assessment of soil P status for determining risk of P loss is uncertain and problematic, given other catchment physicochemical characteristics and the sampling strategy employed.     

Development of the high spatial resolution EMICAT2000 emission model for air pollutants from the north-eastern Iberian Peninsula (Catalonia, Spain)

Ozone (O(3)) pollution episodes take place in Catalonia (NE of the Iberian Peninsula), mainly during summertime. The complex O(3) behaviour could be understood by using a Chemical Transport Model (CTM). Emission inventories provide the spatial and temporal emissions distribution of the O(3) precursors and other pollutants required by this approach. We developed the EMICAT2000 model with high spatial (cells of 1 km(2)) and temporal (1h) resolutions, to estimate the emissions during the year 2000 from Catalonia. Total annual emissions were 107 kt yr(-1) of NO(x), 137 kt yr(-1) of NMVOC, 267 kt yr(-1) of CO, 65 kt yr(-1) of SO(2), 24 kt yr(-1) of TSP and 32,175 kt yr(-1) of equivalent CO(2). Main NO(x) sources are on-road traffic (58%) and industries (38%). Main NMVOC sources are on-road traffic (36%), vegetation (34%) and use of solvents (13%). Speciation was established according to the Carbon Bond IV mechanism. EMICAT2000 generates directly the data files required for the third generation CTM Models-3/CMAQ.     

Case study: Voluntary agreements in environmental management at formosa plastics

Three agreements addressing environmental and safety performance, zero discharge of wastewater and sustainable development have been signed between Formosa Plastics Corporation, Texas (Formosa Plastics), and its former adversaries. The key element of the agreements is the improvement of the affected community. These agreements go beyond public information and beyond procedures for public participation. They have led to meaningful public participation and partnership and are unique in this respect. The following article explores the setup and results of each agreement. The initial agreement, the Blackburn-Formosa Agreement, signed in 1992, set the stage for subsequent partnerships. The Wilson-Formosa Zero Discharge Agreement followed in 1994. Finally, the Sustainable Development Agreement was signed by Jim Blackburn, Diane Wilson, and Formosa Plastics in late 1997. These agreements have proven very successful in avoiding disputes and helping improve company performance in environmental and safety issues. In many respects, these agreements offer a model for others in working with an affected community.     

Effects of a mixture of tetracyclines to Lemna gibba and Myriophyllum sibiricum evaluated in aquatic microcosms

The impact of a mixture of oxytetracycline, chlortetracycline, tetracycline and doxycycline on Myriophyllum sibiricum and Lemna gibba was investigated using fifteen 12,000-L microcosms (k=5, n=3). Significant concentration-response relationships were only found for M. sibiricum, where dry mass was 69, 47, 30, and 7% of controls at respective treatment concentrations of 0.080, 0.218, 0.668, and 2.289 micromol/L. Somatic endpoints were strongly and negatively correlated with percent light transmission, except plant length, which was positively correlated. Treated microcosms experienced a reduction in the percent of surface irradiance penetrating the water column as high as 99.8% at a depth of 70 cm, relative to controls. Position relative to the water column was likely responsible for the differential effects observed between floating (L. gibba) and submerged (M. sibiricum) species of macrophytes. A hazard quotient assessment of the lowest EC10 value indicated significant risk, exceeding the critical HQ value, but not the lowest EC25 value.     

The economic benefits of fulfilling the World Health Organization’s limits for particulates: A case study in Algeciras Bay (Spain)

Algeciras Bay is an important industrial and port zone in the south of Spain whose pollution by particulate matter surpasses the threshold levels recommended by the World Health Organization (WHO) in its 2005 Guide on Air Quality. This study analyses the mortality avoided and the economic benefit which would be derived from a reduction of the pollution of PM2.5 and PM10 to the levels recommended by the WHO in Algeciras Bay in the period 2005-2015. The analysis carried out shows that the industrial zones, such as Los Barrios and San Roque, are those which have greater levels of pollution and in which the relative risk is greater. The calculations for Algeciras Bay between 2000 and 2015 show 182 deaths which would be avoided if the particulate matter pollution were reduced to the levels recommended by the WHO. Likewise, the economic valuation which this impact has on health is carried out through two concepts: the cost of illness and the Value of Statistical Life (VSL). The result shows that the economic benefit that would come out with the cost of illness valuation is 5,329,110€ and from the VSL is 414,787,113€.

Implications: PM_2.5 has a greater concentration in industrial localities and is linked to the industrial activity. When the particulate matter pollution is reduced to the levels recommended by the WHO in an industrialised area such as Algeciras (Spain), 182 deaths which would be avoided. The result shows that the economic benefit that would come out with the cost of illness valuation is 5,329,110€ and from the value of statistical life is 414,787,113€.     

Heavy metal extractable forms in sludge from wastewater treatment plants

The analysis of heavy metals is a very important task to assess the potential environmental and health risk associated with the sludge coming from wastewater treatment plants (WWTPs). However, it is widely accepted that the determination of total elements does not give an accurate estimation of the potential environmental impact. So, it is necessary to apply sequential extraction techniques to obtain a suitable information about their bioavailability or toxicity. In this paper, a sequential extraction scheme according to the BCR's guidelines was applied to sludge samples collected from each sludge treatment step of five municipal activated sludge plants. Al. Cd, Co, Cu, Cr, Fe, Mn, Hg, Mo, Ni, Pb, Ti and Zn were determined in the sludge extracts by inductively coupled plasma atomic emission spectrometry. In relation to current international legislation for the use of sludge for agricultural purposes none of metal concentrations exceeded maximum permitted levels. In most of the metal elements under considerations, results showed a clear rise along the sludge treatment in the proportion of two less-available fractions (oxidizable metal and residual metal).     

Challenges and Opportunities for Creating Intelligent Hazard Alerts: The “FloodHippo” Prototype

Disasters evolving from hazards are a persistent and deadly occurrence in the United States. Despite this, hazard alerts have remained spatially vague, temporally imprecise, and lack actionable information. These deficiencies indicate a divide between the status quo and what is possible given modern environmental models, geographic information systems (GIS), and smartphone capabilities. This work describes an alternative, prototype system, “FloodHippo,” which integrates operational model outputs, cloud‐based GIS, and expanded communication channels to provide personal and interactive disaster alerts for floods. The precepts and methods underpinning FloodHippo apply equally to other disasters that evolve over space and time, presenting the opportunity for a more intelligent disaster response system. The development of such a system would not only minimize current shortcomings in disaster alerts but also improve resilience through individual action, along with community, academic, and federal cooperation.