Factors affecting the concentrations of PM10 in central Taiwan

In this study, the synoptic weather types that have high probability and low probability of producing PM10 episode are referred to as HPE and LPE, respectively. Multiple linear regressions analysis showed that NO2 was the most important contributor (35.61%) to the concentrations of PM10 for HPE weather. For LPE weather, the season factor had the greatest contribution (48.11%) to the concentrations of PM10. Using the correlation coefficients between the concentrations of PM10 and SO2 or NO2 on HPE and LPE to calculate the increase of PM10 from LPE to HPE, we found that the increase of PM10 owing to the increase of SO2 and NO2 from LPE to HPE was 12.93microg/m3 which was about 51% of the total amount of PM10 increased from LPE to HPE. Results of factor analysis showed that the first component could be attributed to the result of local pollution especially for the weather patterns of types P3 and P6, while the secondary component for the weather patterns of types P1 and P4 can be attributed to the long-range transport of SO2 pollutants from China.     

Sorption kinetics of toluene in humin under two different levels of relative humidity

To identify any resistant fraction for desorption of toluene from humin and to quantify the sorption-desorption rates, the time courses of toluene sorption to compressed humin disks and to a thin humin film were investigated. The apparent diffusivity of toluene with humin disks ranges from 10(-8) to 10(-9) cm2/s and increases with temperature, based on the weight change of humin disks mounted on a microbalance and on the results simulated by use of a diffusion model. No detectable level of residual toluene was found after desorption, as revealed either by the gravimetric analysis or by the Fourier transform infrared (FTIR) spectrum obtained at either low or high humidity. The time scale for intrinsic vapor sorption without mass transfer hindrance is less than a few minutes with the thin film. All the results indicate that the sorption of toluene to humin is reversible and mainly diffusion controlled. This finding helps to better understand the sorption kinetics associated with humin and soil organic matter.     

Microsomal monooxygenase activity in Tilapia (Oreochromis mossambicus) exposed to a bleached kraft mill effluent using different exposure systems.

Bleached kraft pulp and paper mill effluents (BKMEs) are known to have adverse effects on aquatic organisms. One of the effects of BKMEs is its ability to induce cytochrome P4501A activity in exposed fish. 7-Ethoxyresorufin O-deethylase (EROD) activity is the most common biomarker used to measure the mixed-function monooxygenase activity. In this study, Tilapia were exposed to BKMEs using different exposure systems and their hepatic EROD activity, as well as liver/somatic index (LSI), were determined. In the Phase I study, Tilapia treated with betaNF and a whole (100%) BKME using a static, non-renewal system exhibited statistically significant EROD induction, but LSI values were not altered. In the Phase II study, fish were either caged in the mill's fishpond with the whole effluent passing through or cultured in tanks receiving 100% of the BKME continuously using a flow-through system in the laboratory. Their EROD activities were then compared with the non-exposed fish (control). The EROD activities in both groups of fish were elevated significantly with the greatest induction being observed in the field-exposed group. The LSI values in all of the field-exposed fish were significantly greater than the control Tilapia. The EROD assay was sensitive in detecting biological changes in fish exposed to the BKME. Further studies are warranted to better understand the impacts of BKMEs on aquatic organisms in Taiwan.     

Chemically Functionalized Plant Fibers and Carbon Nanotubes for High Compatibility and Reinforcement in Polylactic Acid (PLA) Composite

In this study, surface modification is used to improve the compatibility of Kenaf fibers (KFs) and multi-walled carbon nanotubes (MWCNTs) in a polylactic acid (PLA) matrix, as well as to enhance the mechanical properties. Through the use of a silane coupling agent, the KF is grafted with functional groups to generate a chemical bond with the PLA; the modified KF shows high compatibility in the PLA matrix. Compared to the bare PLA, the optimal KF/MWCNT/PLA composite (PC1F30-OX) shows increases of 58% in tensile strength, and 113% in impact strength. A small addition of MWCNTs (1 wt%) dramatically improves the antistatic ability by lowering the surface resistance to 3.47 GΩ. With the addition of hydrophilic KF into the PLA, the composite becomes much more environmentally friendly, and the biodegradation rate can be controlled by the amount of KF added. The addition of hydrophilic KF allowed the composite to accommodate more enzyme to hasten the biodegradation; almost complete decomposition occurred after 11 weeks.     

A giant spider from the Jurassic of China reveals greater diversity of the orbicularian stem group

A large female spider, Nephila jurassica, was described from Middle Jurassic strata of north-east China and placed in the modern genus Nephila (family Nephilidae) on the basis of many morphological similarities, but, as with many ancient fossils, the single specimen lacked synapomorphies of the family (Selden et al. 2011). In order to test the placement within the nephilid phylogenetic tree, Kuntner et al. (2013) calibrated the molecular phylogeny using N. jurassica in three different scenarios based on inferred mitochondrial substitution rates. They concluded that N. jurassica fitted better as a stem orbicularian than a nephilid. Now, a giant male spider has been discovered at the same locality that yielded N. jurassica. The two sexes are considered conspecific based on their similar morphological features, size, and provenance. The male cannot be accommodated in Nephilidae because of its pedipalp morphology, so the new genus Mongolarachne and family Mongolarachnidae are erected for the species. Comparison with possibly related families show that Mongolarachnidae is most likely on the orbicularian stem, close to other cribellate orbicularians (e.g., Deinopoidea), which suggests a greater diversity of cribellate orbicularians during the Middle Jurassic.     

Enhanced cross-flow filtration with flat-sheet ceramic membranes by titanium-based coagulation for membrane fouling control

• Ceramic membrane filtration showed high performance for surface water treatment. • PTC pre-coagulation could enhance ceramic membrane filtration performance. • Ceramic membrane fouling was investigated by four varied mathematical models. • PTC pre-coagulation was high-effective for ceramic membrane fouling control. Application of ceramic membrane (CM) with outstanding characteristics, such as high flux and chemical-resistance, is inevitably restricted by membrane fouling. Coagulation was an economical and effective technology for membrane fouling control. This study investigated the filtration performance of ceramic membrane enhanced by the emerging titanium-based coagulant (polytitanium chloride, PTC). Particular attention was paid to the simulation of ceramic membrane fouling using four widely used mathematical models. Results show that filtration of the PTC-coagulated effluent using flat-sheet ceramic membrane achieved the removal of organic matter up to 78.0%. Permeate flux of ceramic membrane filtration reached 600 L/(m²·h), which was 10-fold higher than that observed with conventional polyaluminum chloride (PAC) case. For PTC, fouling of the ceramic membrane was attributed to the formation of cake layer, whereas for PAC, standard filtration/intermediate filtration (blocking of membrane pores) was also a key fouling mechanism. To sum up, cross-flow filtration with flat-sheet ceramic membranes could be significantly enhanced by titanium-based coagulation to produce both high-quality filtrate and high-permeation flux.     

SPATIAL ANALYSIS FOR MONTHLY RAINFALL IN SOUTH FLORIDA1

ABSTRACT: Several methods have been developed to interpolate point rainfall data and integrate areal rainfall data from any network of stations. From previous studies, it can be concluded that models for spatial analysis of rainfall are dependent on topography, area of analysis, type of rainfall, and density of gauging network. The purpose of this study is to evaluate a set of six appropriate models for point and areal rainfall estimations over a 4000 square mile area in South Florida. In this study, a case of developing spatial continuity model for monthly rainfall from a database that had various lengths of records and missing data is documented. The spatial correlation and variogram models for monthly rainfall were developed. Six methods of spatial interpolation were applied and the results validated with historical observations. The results of the study indicate that the multiquadric, kriging, and optimal interpolation schemes are the best three methods for interpolation of monthly rainfall within the study area. The optimal and kriging methods have the advantage of providing estimates of the error of interpolation. The optimal interpolation method uses the spatial correlation function and the kriging method uses the variogram function. The two spatial functions are related. Either of the two methods provide good estimates of monthly point and areal rainfall in the study area.