水解酸化-缺氧法处理采油废水的污染物迁移降解试验研究

水解酸化．缺氧法对采油废水有较好的处理效果，采用GC／MS技术对水解酸化-缺氧法处理采油废水过程中污染物的迁移降解进行的研究表明：水解酸化段和缺氧段对采油废水中碳原子为C6-C9、分子量为100—140的有机物均有较好的降解能力。其中，在水解酸化段中酮类、芳烃得到较好的降解，缺氧段中酚类和醚类化合物降解明显。水解酸化-缺氧工艺对于采油废水中的甲苯和二甲苯具有较好的降解能力。     

Improved product selectivity of electrochemical reduction of carbon dioxide by tuning local carbon dioxide concentration with multiphysics models

Environmental Chemistry Letters - Electrochemical reduction of carbon dioxide (CO2) is promising to alleviate carbon emissions and produce fuels and materials in a circular way, yet effective...     

Biotoxicity evaluation of zinc oxide nanoparticles on bacterial performance of activated sludge at COD,nitrogen, and phosphorus reduction

• ZnO-NP disrupted metabolic/catabolic balance of bacteria by affecting DHA activity. • ZnO-NPs toxicity was related to Zn²⁺ ion, interaction with cell and ROS generation. • Exposure to ZnO-NPs resulted in changed bacterial community structure at sludge. • The change in the EPS content was observed during exposure to ZnO-NPs. The unique properties and growing usage of zinc oxide nanoparticles increase their release in municipal wastewater treatment plants. Therefore, these nanoparticles, by interacting with microorganisms, can fail the suitable functioning of biological systems in treatment plants. For this reason, research into the toxicity of ZnO is urgent. In the present study, the toxicity mechanism of ZnO-NPs towards microbial communities central to granular activated sludge (GAS) performance was assessed over 120-day exposure. The results demonstrate that the biotoxicity of ZnO-NPs is dependent upon its dosage, exposure time, and the extent of reactive oxygen species (ROS) production. Furthermore, GAS performance and the extracellular polymeric substances (EPS) content were significantly reduced at 50 mg/L ZnO-NPs. This exposure led to decreases in the activity of ammonia monooxygenase (25.2%) and nitrate reductase (11.9%) activity. The Field emission scanning electron microscopy images confirmed that ZnO-NPs were able to disrupt the cell membrane integrity and lead to cell/bacterial death via intracellular ROS generation which was confirmed by the Confocal Laser Scanning Microscopy analysis. After exposure to the NPs, the bacterial community composition shifted to one dominated by Gram-positive bacteria. The results of this study could help to develop environmental standards and regulations for NPs applications and emissions.     

外加镍在土壤中的形态与再分配

镍处理土壤经室内培养12周后,采用连续提取技术对试验土壤中镍的形态与再分配方式进行了研究。研究结果表明,外加的水溶性镍进入土壤后的主要存在形态与添加的剂量有关:低剂量时,以铁锰氧化态为主,这一形态在100mg·kg-1处理土壤中占比例最大,达到31.6%;高剂量时,以交换态为主,这一形态在1600mg·kg-1处理土壤中占比例最大,达到48.4%。随着镍添加剂量由0(对照)增加到1600mg·kg-1,再分配系数逐渐由1.00增大到30.65;金属结合强度系数则由0.90减小至0.25,也反映出进入土壤中镍的剂量较大时,镍是以不稳定的形态占优。试验结果也证实了土壤具有减小镍的环境危害的作用,但这种缓冲能力是有限的。随着时间的推移,镍的形态会继续发生变化,但这一转化过程是缓慢的。因此,一旦土壤发生重金属污染,其对土壤环境的影响将是长期的。     

双酚A促进粪肠球菌中信息素调控质粒pCF10介导的耐药基因接合转移

粪肠球菌是一种在自然水体中广泛存在的革兰氏阳性细菌。信息素调控质粒介导的接合转移是造成粪肠球菌耐药基因快速扩散的重要方式。双酚A是一种内分泌干扰物,因其在工业中大量应用造成其在水环境中的广泛分布。本文以信息素调控质粒中比较有代表性的pCF10质粒作为研究对象,研究了双酚A对粪肠球菌中耐药基因接合转移的影响,证实了双酚A可以促进pCF10质粒介导的耐药基因接合转移,且这一结果同双酚A作用浓度和作用时间相关。双酚A影响耐药基因的扩散,是通过促进编码正调控信息素的ccfA基因表达实现的。本文旨在深入理解双酚A影响抗生素抗性基因扩散的环境行为,为耐药基因控制及双酚A环境效应的评估提供理论支持。     

The size distribution of airborne bacteria and human pathogenic bacteria in a commercial composting plant

•Bacterial concentrations from eight stages were 10⁴–10⁵copies/m³. •Diameter influenced clustering of bacterial and HPB lineages. •Dg of 8 HPB ranged from 2.42 to 5.09 μm in composting areas. •Dg of 8 HPB ranged from 3.70 to 8.96 μm in packaging areas. •HPB had high concentrations and small sizes in composting areas. Composting plants are regarded as one of the important sources of environmental bioaerosols. However, limitations in the size distribution of airborne bacteria have prevented our comprehensive understanding of their risk to human health and their dispersal behavior. In this study, different sizes of airborne bacteria were collected using an eight-stage impactor from a full-scale composting facility. Size-related abundance and communities of airborne bacteria as well as human pathogenic bacteria (HPB) were investigated using 16S rRNA gene sequencing coupled with droplet digital PCR. Our results indicate that the bacterial concentrations from the eight stages were approximately 10⁴–10⁵copies/m³. Although no statistical correlation was detected between the particle size and the Shannon index, the influence of size on bacterial lineages was observed in both composting and packaging areas. For airborne bacteria from different stages, the dominant phyla were Firmicutes, Proteobacteria, and Actinobacteria, and the dominant genera was Bacillus. Seven out of eight HPB with a small geometric mean aerodynamic diameter had a high concentration in composting areas. Based on diameters of 2.42 to 5.09 μm, most HPB in the composting areas were expected to be deposited on the bronchus and secondary bronchus. However, in the packaging areas, the deposition of HPB (diameters 3.70 to 8.96 μm) occurred in the upper part of the respiratory tract. Our results on the size distribution, abundance, and diversity of these bacteria offer important information for the systematic evaluation of bacterial pathogenicity and the potential health impacts on workers in composting plants and the surrounding residents.     

An integrated method for the rapid dewatering and solidification/stabilization of dredged contaminated sediment with a high water content

• An integrated method, called PHDVPSS, was proposed for treating DCS. • The PHDVPSS method showed superior performance compared to conventional method. • Using the method, water content (%) of DCS decreased from 300 to<150 in 3 days. • The 56-day UCS from this method is 12‒17 times higher than conventional method. • Relative to PC, GGBS-MgO binder yielded greater reduction in the leachability. To more efficiently treat the dredged contaminated sediment (DCS) with a high water content, this study proposes an integrated method (called PHDVPSS) that uses the solidifying/stabilizing (S/S) agents and prefabricated horizontal drain (PHD) assisted by vacuum pressure (VP). Using this method, dewatering and solidification/stabilization can be carried out simultaneously such that the treatment time can be significantly shortened and the treatment efficacy can be significantly improved. A series of model tests was conducted to investigate the effectiveness of the proposed method. Experimental results indicated that the proposed PHDVPSS method showed superior performance compared to the conventional S/S method that uses Portland cement (PC) directly without prior dewatering. The 56-day unconfined compressive strength of DCS treated by the proposed method with GGBS-MgO as the binder is 12‒17 times higher than that by the conventional S/S method. DCS treated by the PHDVPSS method exhibited continuous decrease in leaching concentration of Zn with increasing curing age. The reduction of Zn leachability is more obvious when using GGBS-MgO as the binder than when using PC, because GGBS-MgO increased the residual fraction and decreased the acid soluble fraction of Zn. The microstructure analysis reveals the formation of hydrotalcite in GGBS-MgO binder, which resulted in higher mechanical strength and higher Zn stabilization efficiency.     

Cu/Cr co-stabilization mechanisms in a simulated Al2O3-Fe2O3-Cr2O3-CuO waste system

• Cu and Cr can be mostly incorporated into CuFe_xAl_yCr_2−x−yO₄ with a spinel structure. • Spinel phase is the most crucial structure for Cu and Cr co-stabilization. • Compared to Al, Fe and Cr are easier to be incorporated into the spinel structure. • ‘Waste-to-resource’ by thermal process at attainable temperatures can be achieved. Chromium slag usually contains various heavy metals, making its safe treatment difficult. Glass-ceramic sintering has been applied to resolve this issue and emerged as an effective method for metal immobilization by incorporating heavy metals into stable crystal structures. Currently, there is limited knowledge about the reaction pathways adopted by multiple heavy metals and the co-stabilization functions of the crystal structure. To study the Cu/Cr co-stabilization mechanisms during thermal treatment, a simulated system was prepared using a mixture with a molar ratio of Al₂O₃:Fe₂O₃:Cr₂O₃:CuO= 1:1:1:3. The samples were sintered at temperatures 600–1300°C followed by intensive analysis of phase constitutions and microstructure development. A spinel phase (CuFe_xAl_yCr_2−x−yO₄) started to generate at 700°C and the incorporation of Cu/Cr into the spinel largely complete at 900°C, although the spinel peak intensity continued increasing slightly at temperatures above 900°C. Fe₂O₃/Cr₂O₃ was more easily incorporated into the spinel at lower temperatures, while more Al₂O₃ was gradually incorporated into the spinel at higher temperatures. Additionally, sintered sample microstructures became more condensed and smoother with increased sintering temperature. Cu / Cr leachability substantially decreased after Cu/Cr incorporation into the spinel phase at elevated temperatures. At 600°C, the leached ratios for Cu and Cr were 6.28% and 0.65%, respectively. When sintering temperature was increased to 1300°C, the leached ratios for all metal components in the system were below 0.2%. This study proposes a sustainable method for managing Cu/Cr co-exist slag at reasonable temperatures.     

南雄优质适产烤烟因土施肥技术研究

采用田间试验方法,探明南雄县烟区三种土壤类型氮、磷、钾养分的供应特性,烤烟在各生育期吸收养分的规律,不同土壤类型氮、磷、钾肥的不同配比对烤烟产量和质量的影响。根据三年试验结果进行统计,提出优质适产烤烟因土施肥技术方法,为南雄烤烟生产的发展提供了科学的施肥依据。