Experimental and modeling study of the effect of CH(4) and pulverized coal on selective non-catalytic reduction process

The reduction of nitric oxide using ammonia combined with methane and pulverized coal additives has been studied in a drop tube furnace reactor. Simulated flue gas with 1000ppm NO(x) and 3.4% excess oxygen was generated by cylinder gas. Experiments were performed in the temperature range of 700-1200 degrees C to investigate the effects of additives on the DeNO(x) performance. Subsequently, a kinetic mechanism was modified and validated based on experimental results, and a computational kinetic modeling with CHEMKIN was conducted to analyze the secondary pollutants. For both methane and pulverized coal additives, the temperature window is shifted towards lower temperatures. The appropriate reaction temperature is shifted to about 900 and 800 degrees C, respectively with 1000ppm methane and 0.051gmin(-1) pulverized lignite coal. The addition of methane and pulverized coal widens the temperature window towards lower temperature suggesting a low temperature application of the process. Furthermore, selective non-catalytic reduction (SNCR) reaction rate is accelerated evidently with additives and the residence time to complete the reaction is shortened distinctly. NO(x) reduction efficiency with 80% is achieved in about 0.3s without additive at 1000 degrees C. However, it is achieved in only about 0.2s with 100ppm methane as additive, and only 0.07 and 0.05s are needed respectively for the cases of 500 and 1000ppm methane. The modified kinetic modeling agrees well with the experimental results and reveals additional information about the process. Investigation on the byproducts where NO(2) and N(2)O were analyzed by modeling and the others were investigated by experimental means indicates that emissions would not increase with methane and pulverized coal additions in SNCR process and the efficacious temperature range of SNCR reaction is widened approximately with 100 degrees C.     

特尔斐—模糊综合比较法评价生态环境质量变化

根据生态系统的组成,利用特尔斐测定法选定影响环境的因子,确定其权重,现场监测调查实际资料,判定各因子的作用分值,采用模糊综合法计算出生态环境变化前后的综合分值,以判定生态环境质量变化前后的好坏。     

天津市空气污染预报方法

文章论述了空气污染预报几种理论和方法,特别详细介绍了天津市空气质量预报方法及其应用效果。     

Contributions of deposited particles to pine needle polycyclic aromatic hydrocarbons

The contributions of deposited particles (P) to polycyclic aromatic hydrocarbon (PAH) levels in pine (Cedrus deodar) needles sampled from the Dalian region were evaluated by washing off the particles from pine needle surfaces. P values ranged from 4.4 +/- 2.2% for fluorene to 69.9 +/- 4.0% for indeno(1,2,3-cd)pyrene, and positively correlated with the logarithm of octanol-air partition coefficients (log K OA) of each PAH significantly. P and the total levels of 14 PAHs under study ( summation PAHs), that ranged from 490 to 3241 ng g(-1) dw (dry weight) with median value of 1521 ng g(-1) dw, were high for traffic areas, and low for residential or park areas, implying the significant contributions of PAHs in both gas and particle phases emitted by vehicles. However, PAH profiles in pine needles were not significantly altered by the washing, due to the low fractions (2-5%) of the 5- and 6-ring PAHs in summation PAHs. The high wind speed and frequently alternating wind directions in the Dalian spring could quicken the depuration processes of pine needle PAHs. Thus, the local meteorological conditions and source variations should be taken into account when using pine needles to implicate seasonal variations of atmospheric semi-volatile organic compounds.     

Occurrence of organic contaminants in sewage sludges from eleven wastewater treatment plants, China

This study presents the occurrence of 43 semi-volatile organic compounds (SVOCs) listed as priority pollutants by both China and the United States Environmental Protection Agency, in sewage sludges collected from eleven wastewater treatment plants (WWTPs) of mainland and Hong Kong, China. Thirty-six SVOCs were detected by gas chromatography coupled with mass spectrometer (GC-MS) and at least 14 in each sample. The most abundant compounds were phthalic acid esters (PAEs) and polycyclic aromatic hydrocarbons (PAHs) with total concentrations ranging from 10 to 114mgkg(-1) dry weight (d.w.) (with a mean of 30mgkg(-1) d.w.) and from 1.4 to 33mgkg(-1)d.w. (with a mean of 16mgkg(-1) d.w.), respectively, followed by chlorobenzenes, nitroaromatics, haloethers and halogenated hydrocarbons which occurred generally at concentrations lower than 10mgkg(-1) d.w. Large variations were observed between the concentrations of individual compounds as well as their total concentrations in sludge samples from different WWTPs. The highest values of sum concentration of 16 PAHs and of 6 PAEs were found in sewage sludge from Beijing. The mean total concentration of each class of SVOCs in sewage sludge from mainland was remarkably higher than that from Hong Kong. The concentrations of di(2-ethylhexyl) phthalate in 91% sludge samples met the limit (100mgkg(-1)d.w.) proposed by the Europe Union for land application, whereas the PAH concentrations of 64% sludge samples exceeded the maximum permissible concentration (6.0mgkg(-1)d.w.). The occurrence of SVOCs in this study are compared with other studies and their sources are discussed.     

Channel flow and trichloroethylene treatment in a partly iron-filled fracture: experimental and model results

Technical developments have now made it possible to emplace granular zero-valent iron (Fe(0)) in fractured media to create a Fe(0) fracture reactive barrier (Fe(0) FRB) for the treatment of contaminated groundwater. To evaluate this concept, we conducted a laboratory experiment in which trichloroethylene (TCE) contaminated water was flushed through a single uniform fracture created between two sandstone blocks. This fracture was partly filled with what was intended to be a uniform thickness of iron. Partial treatment of TCE by iron demonstrated that the concept of a Fe(0) FRB is practical, but was less than anticipated for an iron layer of uniform thickness. When the experiment was disassembled, evidence of discrete channelised flow was noted and attributed to imperfect placement of the iron. To evaluate the effect of the channel flow, an explicit Channel Model was developed that simplifies this complex flow regime into a conceptualised set of uniform and parallel channels. The mathematical representation of this conceptualisation directly accounts for (i) flow channels and immobile fluid arising from the non-uniform iron placement, (ii) mass transfer from the open fracture to iron and immobile fluid regions, and (iii) degradation in the iron regions. A favourable comparison between laboratory data and the results from the developed mathematical model suggests that the model is capable of representing TCE degradation in fractures with non-uniform iron placement. In order to apply this Channel Model concept to a Fe(0) FRB system, a simplified, or implicit, Lumped Channel Model was developed where the physical and chemical processes in the iron layer and immobile fluid regions are captured by a first-order lumped rate parameter. The performance of this Lumped Channel Model was compared to laboratory data, and benchmarked against the Channel Model. The advantages of the Lumped Channel Model are that the degradation of TCE in the system is represented by a first-order parameter that can be used directly in readily available numerical simulators.     

热镀锌过程污染综合防治改造工程实践

热镀锌生产是传统的重污染行业,单纯的"三废"治理,不仅存在着治理费用高,且存在着"二次污染"的问题。通过以广州某热镀锌生产污染综合防治改造工程为例,全面分析生产过程中存在的污染源,通过对生产工艺进行改造,提高原料及能源利用率,减少污染物的产生,实现污染的全过程综合防治,在此基础上,总结成功实施的经验,为类似项目的污染防治工作提供参考和借鉴。     

浮萍生长及其除磷效率的影响因素的研究

磷是藻类增殖的限制因子,是引起水体富营养化的关键营养物质.有效除磷,能在很大程度上减轻水体的富营养化.利用浮萍科植物吸收转化污水中的营养物质引起了越来越多研究者的关注,但对浮萍科植物除磷效果的影响因素的研究相对较少.以少根紫萍(Spirodela oligorrhiza)为供试材料,以完全培养液为处理对象,研究了培养液pH、少根紫萍初始放养密度对其生长及除磷效率的影响.结果表明:少根紫萍能够耐受的最低pH在4左右,在pH＝5～9能正常生长,在pH＝6～8具有较高的TP去除率,最高去除率可达84.1%;少根紫萍的相对增长率随其初始放养密度的增加而降低,但其鲜重增长量、平均增长速率、TP去除率及平均TP去除速率均随着初始放养密度的增加而增加.     

铬渣酸溶性六价铬浸出动力学研究

考察了铬渣中的六价铬的在硫酸中浸出行为,分别研究了温度、硫酸浓度和铬渣粒径对酸溶性六价铬浸出的影响.研究表明,酸溶性六价铬酸浸为化学反应过程,可用"颗粒不变缩核收缩芯模型"进行描述,通过尝试法,确定酸溶性六价铬浸出过程为内扩散控制类型,表观活化能为9.32 kJ/mol;在此基础上,经多元回归分析,得到了表观反应速率常数关于温度、硫酸浓度和铬渣粒径的经验表达式.     

白银露天矿粉尘污染预报及控制管理模式的研究

在白银露天矿污染气象站五年的污染气象观测基础上,分析了采场粉尘浓度与污染源强度和气象因素之间的相关性,提出了粉尘污染预报的模式和方法,其准确率达到66.9％。并以粉尘污染预报模式为依据。提出了污染源控制管理模式。试验表明利用本模式对污染源实施控制管理具有实用意义和价值。