Breccias of the Adnet Formation: indicators of a Mid-Liassic tectonic event in the Northern Calcareous Alps (Salzburg/Austria)

Stratigraphy, lithology and depositional structures of Liassic red limestone-breccias of the Adnet Formation, including the 'Adnet Scheck', were studied at several outcrops of the Northern Calcareous Alps (NCA) south-east of Salzburg. A four-fold lithostratigraphic division is proposed for the Adnet Formation of the Osterhorn Mountains: the hemipelagic Schmiedwirt (Sinemurian) and Kehlbach (Carixian) members are separated from the pelagic Saubach Member (Toarcian) by a layer of amalgamated breccias (Scheck Member, probably Domerian to early Toarcian). Several other breccia beds occur locally from the base of the Kehlbach Member up to the lower Saubach Member. Although the sediments overlying the Scheck Member breccias are of coeval age, the ages of the underlying strata are very different. This can be explained by submarine Liassic erosion during a period of resedimentation from the middle Carixian until the early Toarcian. At least 10–15?m of partly lithified sediments were eroded by gravity flows. The entire Kehlbach Member and up to two-thirds of the Schmiedwirt Member were removed at Adnet. The breccias originated from submarine debris flows. Repeated flows over a long period and the depositional setting exclude a triggering by sea-level fluctuations. Most probably they arose from tectonically triggered slumps and slides of superficial sediments. The 'Scheck' was initiated on the steep upper slope of the drowned Triassic Adnet reef and flowed to the north-east.The Pliensbachian to early Toarcian period of tectonic activity indicated by the breccias was the most important during the Liassic in the Osterhorn Mountains and other parts of the NCA. From the large-scale regional distribution of the breccias and in accord with published data, a roughly north-east trending strike-slip fault zone is proposed, crossing the NCA south of the Osterhorn block, with a peaking activity during the Pliensbachian to early Toarcian as the cause of the tectonic movements.     

Latest precambrian (Cadomian) zircon ages, Nd isotopic systematics and P-T evolution of granitoid orthogneisses of the Erzgebirge, Saxony and Czech Republic

Single zircons from two orthogneiss complexes, the Grey Gneiss and Red Gneiss, the lowermost tectonic units in the Erzgebirge, were dated. The grey Freiberg Gneiss is of igneous origin and has a ²⁰⁷Pb/²⁰⁶Pb emplacement age of 550±7 Ma. A quartz monzonite from Lauenstein contains idiomorphic zircons with a mean ²⁰⁷Pb/²⁰⁶Pb age of 555±7 Ma as well as xenocrysts ranging in age between 850 and 1910 Ma. Red gneisses from the central Erzgebirge contain complex zircon populations, including numerous xenocrysts up to 2464 Ma in age. The youngest, idiomorphic, zircons in all samples yielded uniform ²⁰⁷Pb/²⁰⁶Pb ages between 550±9 and 554±10 Ma. Nd isotopic data support the interpretation of crustal anatexis for the origin of both units. _Nd(t) values for the grey gneisses are –7.5 and –6.0 respectively, (mean crustal residence ages of 1.7–1.8 Ga). The red gneisses have a wider range in _Nd(t) values from –7.7 to –2.8 (T _DM ages of 1.4–1.8 Ga). The zircon ages document a distinct late Proterozoic phase of granitoid magmatism, similar in age to granitoids in the Lusatian block farther north-east. However, Palaeozoic deformation as well as medium pressure metamorphism ( 8 kbar/600–650° C) are identical in both gneiss units and distinguish these rocks from the Lusatian granitoids. The grey and red gneisses were overthrust by units with abundant high-pressure relicts and a contrasting P-T evolution. Zircon xenocryst and Nd model ages in the range 1000–1700 Ma are similar to those in granitoid rocks of Lusatia and the West-Sudetes, and document a pre-Cadomian basement in parts of east-central Europe that, chronologically, has similarities with the Sveconorwegian domain in the Baltic Shield.     

涕灭威在植物和土壤中的移动与分布

报道了涕灭威在花生、棉花、柑橘和土壤中的吸收、运转和分布。结果表明，涕灭威及其代谢物在柑橘叶子中的残留４０ｄ达到最高峰（３．４４９ｐｐｍ），可食部位的残留范围为０－０．０８９ｐｐｍ，低于美国ＥＰＡ规定的ＭＲＬ。涕灭威在土壤中降解较快，半衰期约１周。收获时土壤中的检出范围为０－０．１５７ｐｐｍ。涕灭威及其代谢物水溶性很强，且具有渗透和扩散性，因此使用不当可能造成地下水污染。     

高强铝合金超塑挤压成形

主要介绍了工业牌号高强铝合金在供应态或经简单预处理后在通用油压机上超塑成形的实例,并分析探讨了非理想组织材料超塑成形中微观组织的变化。     

医用射线装置对环境辐射水平的影响

调查了上海市7家医院50余台x、γ射线装置,监测了工作环境和公众环境的辐射水平,并根据辐射防护规定进行评价。调查发现,由于少数设备老化,或防护门窗安装不当等,造成了环境剂量的增加。     

羌塘高原美马错自然保护区的初步评价

拟建的羌塘高原美马错自然保护区是我国青藏高原高寒草原生态系统保存最完好的地区之一,区内含有野牦牛、藏野驴、藏羚等多种珍稀野生动物,其密度之高为西藏所仅见。该地区具有极高的自然保护价值,应作为代表青藏高原高寒草原生态系统的典型地区,列为国家级自然保护区。     

假单胞杆菌抗镉基因的克隆

以pBR322为载体,将抗镉的假单胞杆菌R4染色体的抗镉基因克隆至大肠杆菌HB101,从5000个重组体中筛选出一株抗镉基因克隆株,命名为大肠杆菌HB101(pBC311)。重组质粒pBC311经PstⅠ酶解和琼脂糖凝胶电泳证实抗镉基因位于3.6kb长的PstⅠ片段上。克隆菌株可在含100μg/ml CdCl_2的L-肉汤中生长,其生长停滞期比受体大肠杆菌HB101短得多,说明克隆菌株含有抗镉基因。     

用多硫化物同时去除高浓度含氰电镀废水中氰和重金属的研究

研究表明,用多硫化物处理高浓度含氰电镀废水的同时,亦可有效地去除废水中的重金属,其方法操作简便。本文对实际应用中所需的工艺条件、反应产物硫氰化物的去向、残余多硫化物的处理、多硫化物的合成、反应热效应等进行了研究,取得了满意的结果。     

柴油添加剂的研究——有机钡盐的消烟助燃作用

本文介绍一种以有机钡盐为主的复合型柴油添加剂,其主要成分是过氧化钡与环烷酸在焦化汽油中反应所生成的环烷酸钡。台架实验结果表明,该添加剂在柴油中添加量为0.5—1.5‰(重量,以钡计)时,取得了消烟率40.9—66.3％、节能0.36—4.42％的效果。行车试验也证明本添加剂具有优良的消烟节能作用,当添加量为1.0‰(重量,以钡计)时,平均消烟率为67.7％,节油5.21％。     

厌氧升流式污泥层反应器内污泥颗粒化对固液分离效果的影响

厌氧升流式污泥层反应器在较高的COD容积负荷和水力负荷下稳定运行的关键是要有良好的固液分离,而固液分离的必要条件是污泥的沉降速度大于混合液在三相分离器的沉降区的最小断面上的向上流速。通过小型装置的试验表明,污泥的沉降速度与污泥的性状和浓度有关,使反应器内的污泥颗粒化能改善污泥沉降性、提高固液分离效果,使反应器能在相当高的COD容积负荷(20—30kgCOD/m~3·d)和水力负荷(0.8m~3/m~2·h)下稳定运行。本文叙述了厌氧升流式污泥层反应器内的污泥颗粒化过程,并简要地讨论了培养颗粒污泥的基本条件。