珠江入海河口经济鱼类重金属含量分析

1999年5－6月和10－11月对珠江三角洲虎门、蕉门、磨刀门3大入海河口的经济鱼类肌肉中重金属残留水平进行了调查分析，结果表明在采集的24个种类鱼样中，Zn、Pb、As3种重金属含量分别为5.789mg/kg、0.987mg/kg、0.207mg/kg，超标率分别为45％、50％、44％。在3大入海口采集的鱼样中，肌肉内重金属含量经方差分析表明，各地点无显著差异，与80年代河口鱼类肌肉重金属含量相比，Zn、Pb、Cr含量有显著差异。     

废电池的环境污染及资源化价值分析

分析了各类废电池的资源化,安再生利用价值由高到低顺序依次为铅酸蓄电池、镍镉、镍氢电池、普通干电池。电池中含有的主要污染物质包括重金属以及酸、碱等电解质溶液。对环境和人体健康危害较大的废电池类别主要为：（1）含汞电池，指氧化汞电池，部分汞含量较高的锌锰和碱锰干电池；（2）铅酸蓄电池；（3）含镉电池，主要是Ni-Cd电池。废电池中化学物质释放进入环境过程是在电池包壳破损后发生的，或者是电池包壳本身发生浸蚀作用。普通家用干电池中的污染物质大多呈固态，由电池内部迁移到环境中是一种缓慢的过程。文中还分析了废电池污染环境的主要途径、采用各种不同处理、处置方式管理废电池可能引起的环境污染。     

基于熵的RCM方法在海上油气设施安全评估中的应用

针对海上油气处理系统开展RCM分析时专家意见分散这一情况,采用熵权模型对各专家的评分计算筛选,确定权重排序后,再进行详细的FMEA分析。结果表明:熵权模型的建立和应用识别出了50%的低风险等级设施,将分析关注重点聚焦于高中风险设施;对故障模式进行安全、环境、生产损失和维修成本FMAE分析,给出了采用状态监测、故障检测、定期更换或修复、改进性维修方向性操作以及采用维护点检措施,包括机械常规检查、机械状态监测、电气检查、仪表检查、联锁检查、绝热检查的维护检修策略。     

Experimental investigation of the effect of occupant characteristics on contemporary seat belt payout behavior in frontal impacts

Objective: The goal of this study was to investigate the influence of the occupant characteristics on seat belt force vs. payout behavior based on experiment data from different configurations in frontal impacts.

Methods: The data set reviewed consists of 58 frontal sled tests using several anthropomorphic test devices (ATDs) and postmortem human subjects (PMHS), restrained by different belt systems (standard belt, SB; force-limiting belt, FLB) at 2 impact severities (48 and 29 km/h). The seat belt behavior was characterized in terms of the shoulder belt force vs. belt payout behavior. A univariate linear regression was used to assess the factor significance of the occupant body mass or stature on the peak tension force and gross belt payout.

Results: With the SB, the seat belt behavior obtained by the ATDs exhibited similar force slopes regardless of the occupant size and impact severities, whereas those obtained by the PMHS were varied. Under the 48 km/h impact, the peak tension force and gross belt payout obtained by ATDs was highly correlated to the occupant stature (P =.03, P =.02) and body mass (P =.05, P =.04), though no statistical difference with the stature or body mass were noticed for the PMHS (peak force: P =.09, P =.42; gross payout: P =.40, P =.48). With the FLB under the 48 km/h impact, highly linear relationships were noticed between the occupant body mass and the peak tension force (R² = 0.9782) and between the gross payout and stature (R² = 0.9232) regardless of the occupant types.

Conclusions: The analysis indicated that the PMHS characteristics showed a significant influence on the belt response, whereas the belt response obtained with the ATDs was more reproducible. The potential cause included the occupant anthropometry, body mass distribution, and relative motion among body segments specific to the population variance. This study provided a primary data source to understand the biomechanical interaction of the occupant with the restraint system. Further research is necessary to consider these effects in the computational studies and optimized design of the restraint system in a more realistic manner.     

Indicator system to evaluate the effectiveness and efficiency of China clean power systems

Mitigation and Adaptation Strategies for Global Change - The mitigation of climate change demands a transition to low-carbon power generation systems. To identify effective transition strategies...     

Physico-chemical characterization and source tracking of black carbon at a suburban site in Beijing

Particles from ambient air and combustion sources including vehicle emission, coal combustion and biomass burning were collected and chemically pretreated with the purpose of obtaining isolated BC (black carbon) samples. TEM (transmission electron microscopy) results indicate that BC from combustion sources shows various patterns, and airborne BC appears spherical and about 50 nm in diameter with a homogeneous surface and turbostratic structure. The BET (Barrett–Emmett–Teller) results suggest that the surface areas of these BC particles fall in the range of 3–23 m²/g, with a total pore volume of 0.03–0.05 cm³/g and a mean pore diameter of 7–53 nm. The nitrogen adsorption–desorption isotherms are indicative of the accumulation mode and uniform pore size. O₂-TPO (temperature programmed oxidation) profiles suggest that the airborne BC oxidation could be classified as the oxidation of amorphous carbon, which falls in the range of 406–490°C with peaks at 418, 423 and 475°C, respectively. Generally, the BC characteristics and source analysis suggest that airborne BC most likely comes from diesel vehicle emission at this site.     

黄磷乳浊液脱硝及改性研究

采用黄磷乳浊液为吸收剂,考察了黄磷浓度、反应温度、搅拌速度、氧气浓度、烟气流量等影响因素对脱硝率的影响,并且通过添加碳酸钙进行改性,提高了体系的脱硝率。结果表明,脱硝率随黄磷浓度增大、反应温度升高、搅拌速度增大而升高;随烟气流量的增大而下降;加入碳酸钙改性可以明显提高体系脱硝效果;烟气流量400 m L/min,反应温度50℃,搅拌速度1 200 r/min,氧气浓度12%,黄磷浓度6 g/L,碳酸钙浓度2 g/L的条件下,处理NO浓度为0.06%的烟气,反应30 min体系脱硝率可达到84.76%。     

Phosphorus recovery from biogas fermentation liquid by Ca-Mg loaded biochar

Shortage in phosphorus (P) resources and P wastewater pollution is considered as a serious problem worldwide. The application of modified biochar for P recovery from wastewater and reuse of recovered P as agricultural fertilizer is a preferred process. This work aims to develop a calcium and magnesium loaded biochar (Ca-Mg/biochar) application for P recovery from biogas fermentation liquid. The physico-chemical characterization, adsorption efficiency, adsorption selectivity, and postsorption availability of Ca-Mg/biochar were investigated. The synthesized Ca-Mg/biochar was rich in organic functional groups and in CaO and MgO nanoparticles. With the increase in synthesis temperature, the yield decreased, C content increased, H content decreased, N content remained the same basically, and BET surface area increased. The P adsorption of Ca-Mg/biochar could be accelerated by nano-CaO and nano-MgO particles and reached equilibrium after 360 min. The process was endothermic, spontaneous, and showed an increase in the disorder of the solid-liquid interface. Moreover, it could be fitted by the Freundlich model. The maximum P adsorption amounts were 294.22, 315.33, and 326.63 mg/g. The P adsorption selectivity of Ca-Mg/biochar could not be significantly influenced by the typical pH level of biogas fermentation liquid. The nano-CaO and nano-MgO particles of Ca-Mg/biochar could reduce the negative interaction effects of coexisting ions. The P releasing amounts of postsorption Ca-Mg/biochar were in the order of Ca-Mg/B600 > Ca-Mg/B450 > Ca-Mg/B300. Results revealed that postsorption Ca-Mg/biochar can continually release P and is more suitable for an acid environment.     

Antimony(V) removal from water by hydrated ferric oxides supported by calcite sand and polymeric anion exchanger

We fabricated and characterized two hybrid adsorbents originated from hydrated ferric oxides(HFOs) using a polymeric anion exchanger D201 and calcite as host. The resultant adsorbents(denoted as HFO-201 and IOCCS) were employed for Sb(V) removal from water. Increasing solution pH from 3 to 9 apparently weakened Sb(V) removal by both composites, while increasing temperature from 293 to 313 K only improved Sb(V) uptake by IOCCS. HFO-201 exhibited much higher capacity for Sb(V) than for IOCCS in the absence of other anions in solution. Increasing ionic strength from 0.01 to 0.1 mol/L NaNO3would result in a significant drop of the capacity of HFO-201 in the studied pH ranges; however, negligible effect was observed for IOCCS under similar conditions. Similarly, the competing chloride and sulfate pose more negative effect on Sb(V) adsorption by HFO-201 than by IOCCS, and the presence of silicate greatly decreased their adsorption simultaneously, while calcium ions were found to promote the adsorption of both adsorbents. XPS analysis further demonstrated that preferable Sb(V) adsorption by both hybrids was attributed to the inner sphere complexation of Sb(V) and HFO, and Ca(II) induced adsorption enhancement possibly resulted from the formation of HFO-Ca-Sb complexes. Column adsorption runs proved that Sb(V) in the synthetic water could be effectively removed from 30 μg/L to below 5 μg/L(the drinking water standard regulated by China), and the effective treatable volume of IOCCS was around 6 times as that of HFO-201, implying that HFO coatings onto calcite might be a more effective approach than immobilization inside D201.