Environmental impact of APC residues from municipal solid waste incineration: reuse assessment based on soil and surface water protection criteria

Waste management and environmental protection are mandatory requirements of modern society. In our study, air pollution control (APC) residues from municipal solid waste incinerators (MSWI) were considered as a mixture of fly ash and fine particulate solids collected in scrubbers and fabric filters. These are hazardous wastes and require treatment before landfill. Although there are a number of treatment options, it is highly recommended to find practical applications rather than just dump them in landfill sites. In general, for using a construction material, beyond technical specifications also soil and surface water criteria may be used to ensure environmental protection. The Dutch Building Materials Decree (BMD) is a valuable tool in this respect and it was used to investigate which properties do not meet the threshold criteria so that APC residues can be further used as secondary building material. To this end, some scenarios were evaluated by considering release of inorganic species from unmoulded and moulded applications. The main conclusion is that the high amount of soluble salts makes the APC residues a building material prohibited in any of the conditions tested. In case of moulding materials, the limits of heavy metals are complied, and their use in Category 1 would be allowed. However, also in this case, the soluble salts lead to the classification of "building material not allowed". The treatments with phosphates or silicates are able to solve the problem of heavy metals, but difficulties with the soluble salts are still observed. This analysis suggests that for APC residues to comply with soil and surface water protection criteria to be further used as building material at least a pre-treating for removing soluble salts is absolutely required.     

Displaying in the dark: light-dependent alternative mating tactics in the Alpine newt

Environment plays a major role for determining the kind of courtship behaviours or alternative mating tactics employed, but the effect of physical variables on fitness has received little attention. The Alpine newt courts during both day and night times and exhibits a complex suite of behaviours involving olfactory, visual and tactile cues. Displaying in both dark and light conditions may increase the number of mating opportunities and alleviate predation risk, but the frequency and efficacy of the various tactics deployed may vary across light conditions, leading males to vary their use of these tactics across different light regimes. To test this hypothesis, we video-recorded sexual encounters at two light intensities in a controlled experimental design. When courting in the dark, males used comparatively more olfactory rather than visual displays. They also relied more on positive feedback from the female before releasing a spermatophore for her to pick up. The particular mix of tactics used under each light condition is likely to be adaptive because in the dark (1) visual communication is hampered, making olfactory displays possibly more effective and (2) males depositing spermatophores are more likely to lose fertilizations to competitors. Mating in light and dark conditions has similar reproductive payoffs, which shows that displaying in the dark is not detrimental and may even be advantageous if predation risk is reduced at night. These results confirm the importance of taking into account physical variables to understand the evolution of sexual communication in animals.     

The role of hydrodynamics, matrix and sampling duration in passive sampling of polar compounds with Empore SDB-RPS disks

There is an increasing need to monitor concentrations of polar organic contaminants in the aquatic environment. Integrative passive samplers can be used to assess time weighted average aqueous concentrations, provided calibration data are available and sampling rates are known. The sampling rate depends on environmental factors, such as temperature and water flow rate. Here we introduce an apparatus to investigate the sampling properties of passive samplers using river-like flow conditions and ambient environmental matrices: river water and treated sewage effluent. As a model sampler we selected Empore SDB-RPS disks in a Chemcatcher housing. The disks were exposed for 1 to 8 days at flow rates between 0.03 and 0.4 m s(-1). Samples were analysed using a bioassay for estrogenic activity and by LC-MS-MS target analysis of the pharmaceuticals sulfamethoxazole, carbamazepine and clarithromycin. In order to assess sampling rates of SDB disks, we also measured aqueous concentrations of the pharmaceuticals. Sampling rates increased with increasing flow rate and this relationship was not affected by the environmental matrix. However, SDB disks were only sampling in the integrative mode at low flow rates <0.1 m s(-1) and/or for short sampling times. The duration of linear uptake was particularly short for sulfamethoxazole (1 day) and longer for clarithromycin (5 days). At 0.03 m s(-1) and 12-14 degrees C, the sampling rate of SDB disks was 0.09 L day(-1) for clarithromycin, 0.14 L day(-1) for sulfamethoxazole and 0.25 L day(-1) for carbamazepine. The results show that under controlled conditions, SDB disks can be effectively used as passive sampling devices.     

Chemical monitoring of river water bodies in an EU outermost region: examples from the Azores archipelago (Portugal)

Chemical monitoring of water quality on a total of 16 rivers in the Azores archipelago (Portugal), since 2003, made it possible to identify the major pressures and spatial geochemical variations along main course of the rivers. River water pollution is to a large extent associated to point sources, namely domestic wastewater discharges, especially in urban areas, and diffuse sources, associated with pasture land, and explain the high values on BOD(5) and nutrients (P and N). Heavy metals and metalloids, as well as hydrocarbons and pesticides, are generally under the detection limits of the analytical methods. Generally, river water reflects pollution loads according to a simple model, derived from land use in the watershed: in the upper part conditions are pristine, in the intermediate portion of the basin pasture land dominates and near the coast urban discharges are increasingly important. Results stress the role that an approach based on the watershed scale, coupled with land use management measures, are crucial to water management procedures and a successful WFD implementation in small river basin districts like the Azores. The paper also shows the need for full compliance regarding EU directives on urban wastewater and nitrate pollution due to agriculture.     

Chromium fractionation and speciation in natural waters

It is common for leather industries to dump chromium-contaminated effluent into rivers and other bodies of water. Thus, it is crucial to know the impacts caused by this practice to the environment. A study on chromium partitioning and speciation, with determination at trace levels, was carried out in a potentially contaminated creek. Chromium fractionation and speciation was performed using a flow-injection preconcentration system and detection by flame atomic absorption spectrometry. High levels of this element were found in the particulate material (449-9320 mg kg(-1)), which indicates its compatibility with this fraction. The concentration of Cr(iii) in the water samples collected ranged from 5.2-105.2 μg L(-1). Cr(vi) was always below of the DL (0.3 μg L(-1)). Chromium accumulation observed in the sediment (873-1691 mg kg(-1)) may confirm contamination due to the long term release of contaminated effluents in the creek.     

Spatial and seasonal distribution of 17 endocrine disruptor compounds in an urban estuary (Mondego River,Portugal): evaluation of the estrogenic load of the area

The Mondego River estuary demonstrates signs of pollution, but the levels of endocrine disrupting compounds (EDCs), such as the natural (17β-estradiol and estrone) and pharmaceutical (17α-ethynylestradiol) estrogens, xenoestrogenic industrial pollutants (4-octylphenol, 4-nonylphenol, and their mono- and diethoxylates and bisphenol A), phytoestrogens (formononetin, biochanin A, daidzein, and genistein), and sitosterol were either poorly or never measured in this area. Thus, to conclude about the influx of EDCs in this estuary, water samples were taken every 2 months, during 1 year (2010) in low tide, at eight sites distributed along the estuary. Water samples (1 L) were preconcentrated in the Oasis HLB cartridges and cleaned in silica cartridges before their analysis by GC-MS. In summer, potentially hazardous amounts of estrogens (≈26 ng L^?1), alkylphenols (≈11.5 μg L^?1), alkylphenolethoxylates (≈13 μg L^?1), and phytoestrogens (≈5.6 μg L^?1) were measured. These data suggest that changes in the hydrodynamics of the estuary coupled with the increase of water temperatures interfere with the amount of EDCs in the water. Complementary physicochemical parameters also point to high levels of anthropogenic pollution in this area. Globally, the estrogenic load, expressed in ethynylestradiol equivalents, attained 71.8 ng L^?1 demonstrating that, all together, the measured EDCs pose important health risks for both biota and humans.     

Differential global profiling as a new analytical strategy for revealing micropollutant treatment by-products: application to ethinylestradiol and chlorination water treatment

The detection and structural elucidation of micropollutants treatment by-products are major issues to estimate efficiencies of the processes employed for drinking water production versus endocrine disruptive compounds contamination. This issue was mainly investigated at the laboratory scale and in high concentration conditions. However, potential by-products generated after chlorination can be influenced by the dilution factor employed in real conditions. The present study proposes a new methodology borrowed to the metabolomic science, using liquid chromatography coupled to high-resolution mass spectrometry, in order to reveal potential chlorination by-products of ethinylestradiol in spiked real water samples at the part-per-billion level (5 μg L⁻¹). Conventional targeted measurements first demonstrated that chlorination with sodium hypochlorite (0.8 mg L⁻¹) led to removals of ethinylestradiol over 97%. Then, the developed differential global profiling approach permitted to reveal eight chlorination by-products of EE2, six of them being described for the first time. Among these eight halogenated compounds, five have been structurally identified, demonstrating the potential capabilities of this new methodology applied to environmental samples.     

RECOTOX,a French initiative in ecotoxicology-toxicology to monitor,understand and mitigate the ecotoxicological impacts of pollutants in socioagroecosystems

RECOTOX is a cross-cutting initiative promoting an integrated research to respond to the challenges of monitoring, understanding, and mitigating environmental and health impacts of pesticides in agroecosystems. The added value of RECOTOX is to develop a common culture around spatial ecotoxicology including the whole chain of pressure-exposure-impact, while strengthening an integrated network of in natura specifically equipped sites. In particular, it promotes transversal approaches at relevant socioecological system scales, to capitalize knowledge, expertise, and ongoing research in ecotoxicology and, to a lesser extent, environmental toxicology. Thus, it will open existing research infrastructures in environmental sciences to research programs in ecotoxicology of pesticides.     

Nanoanalytics: history,concepts, and specificities

Environmental Science and Pollution Research - This article deals with analytical chemistry devoted to nano-objects. A short review presents nano-objects, their singularity in relation to their...