Chromium fractionation and speciation in natural waters

It is common for leather industries to dump chromium-contaminated effluent into rivers and other bodies of water. Thus, it is crucial to know the impacts caused by this practice to the environment. A study on chromium partitioning and speciation, with determination at trace levels, was carried out in a potentially contaminated creek. Chromium fractionation and speciation was performed using a flow-injection preconcentration system and detection by flame atomic absorption spectrometry. High levels of this element were found in the particulate material (449-9320 mg kg(-1)), which indicates its compatibility with this fraction. The concentration of Cr(iii) in the water samples collected ranged from 5.2-105.2 μg L(-1). Cr(vi) was always below of the DL (0.3 μg L(-1)). Chromium accumulation observed in the sediment (873-1691 mg kg(-1)) may confirm contamination due to the long term release of contaminated effluents in the creek.     

Pesticide residues in sediments and aquatic species in Lake Nokoué and Cotonou Lagoon in the Republic of Bénin

Lake Nokoué and Cotonou Lagoon are the most important and most productive continental freshwaters in Bénin, with an estimated fish production of over 2 tonnes per hectare in Lake Nokoué. Organochlorine pesticides are used in agriculture and to repel tsetse flies, malaria mosquitoes and other diseases raised. Sediment, fish, shrimp and oyster species were collected in Lake Nokoué and Cotonou Lagoon for pesticide residues analysis. The main pesticides identified in sediment were pp′-DDT and its metabolites pp-DDE and pp′-DDD, with residue levels between the detection limit and 24.4 μg/kg dry weight. Fish species commonly consumed such as Elops lacerta, Podamasys jubelini, Gobbienellus occidentalis, Ethmalosa fimbriata, Mugil cephalus and Hemichromis fasciatus were contaminated with residues of seven to nine pesticides, including pp-DDE, op′-DDD, pp′-DDD, op′-DDT, pp′-DDT, α-endosulfan, aldrin, dieldrin and γ-hexachlorocyclohexane. The levels ranged from detection limit to 289 ng/g lipid. The same pesticides were also detected in other aquatic species, such as shrimp and oysters. A summed risk assessment, comparing pesticide intake levels through fish consumption with tolerable daily intake levels proposed by the World Health Organization, showed in all cases a low risk for human health.     

Spatial and seasonal distribution of 17 endocrine disruptor compounds in an urban estuary (Mondego River,Portugal): evaluation of the estrogenic load of the area

The Mondego River estuary demonstrates signs of pollution, but the levels of endocrine disrupting compounds (EDCs), such as the natural (17β-estradiol and estrone) and pharmaceutical (17α-ethynylestradiol) estrogens, xenoestrogenic industrial pollutants (4-octylphenol, 4-nonylphenol, and their mono- and diethoxylates and bisphenol A), phytoestrogens (formononetin, biochanin A, daidzein, and genistein), and sitosterol were either poorly or never measured in this area. Thus, to conclude about the influx of EDCs in this estuary, water samples were taken every 2 months, during 1 year (2010) in low tide, at eight sites distributed along the estuary. Water samples (1 L) were preconcentrated in the Oasis HLB cartridges and cleaned in silica cartridges before their analysis by GC-MS. In summer, potentially hazardous amounts of estrogens (≈26 ng L^?1), alkylphenols (≈11.5 μg L^?1), alkylphenolethoxylates (≈13 μg L^?1), and phytoestrogens (≈5.6 μg L^?1) were measured. These data suggest that changes in the hydrodynamics of the estuary coupled with the increase of water temperatures interfere with the amount of EDCs in the water. Complementary physicochemical parameters also point to high levels of anthropogenic pollution in this area. Globally, the estrogenic load, expressed in ethynylestradiol equivalents, attained 71.8 ng L^?1 demonstrating that, all together, the measured EDCs pose important health risks for both biota and humans.     

Community duplicate diet methodology: a new tool for estimating dietary exposures to pesticides

An observational field study was conducted to assess the feasibility of a community duplicate diet collection method; a dietary monitoring tool that is population-based. The purpose was to establish an alternative procedure to duplicate diet sampling that would be more efficient for a large, defined population, e.g., in the National Children's Study (NCS). Questionnaire data and food samples were collected in a residence so as not to lose the important component of storage, preparation, and handling in a contaminated microenvironment. The participants included nine Hispanic women of child bearing age living in Apopka, FL, USA. Foods highly consumed by Hispanic women were identified based on national food frequency questionnaires and prioritized by permethrin residue concentrations as measured for the Pesticide Data Program. Participants filled out questionnaires to determine if highly consumed foods were commonly eaten by them and to assess the collection protocol for the food samples. Measureable levels of permethrin were found in 54% of the samples. Questionnaire responses indicated that the collection of the community duplicate diet was feasible for a defined population.     

Synthesis of zeolite from waste fly ash for adsorption of CO2

Zeolitic sorbents for CO₂ adsorption were prepared from waste coal fly ash (FA) through hydrothermal treatment at various ratios of NaOH/FA and NaAlO₂/FA, including an initial alkali fusion step. The fusion step decomposed the fly ash into very small amorphous particulate zeolite forms. The fly ash was converted to Na-P1 type with a NaOH/FA ratio of 0.5 and Na-A type with a NaAlO₂/FA ratio of 0.53. The product properties were affected by the reaction temperature: Na-P1 and Na-A types were formed at 100°C. Temperatures above 140°C led to the formation of more sodalite because of the redissolving and recrystallization of zeolite crystals. Alkali metal and alkaline earth metal cations were impregnated in the synthesized Na-P1 and Na-A zeolite through an ion-exchange method. The completed zeolitic sorbents were applied to the adsorption of low-level CO₂. As a result of the experiments, calcium ions were found to be the best for CO₂ adsorption owing to their electrostatic behavior and acid-base interaction.     

Defining Chlorophyll-a Reference Conditions in European Lakes

The concept of “reference conditions” describes the benchmark against which current conditions are compared when assessing the status of water bodies. In this paper we focus on the establishment of reference conditions for European lakes according to a phytoplankton biomass indicator—the concentration of chlorophyll-a. A mostly spatial approach (selection of existing lakes with no or minor human impact) was used to set the reference conditions for chlorophyll-a values, supplemented by historical data, paleolimnological investigations and modelling. The work resulted in definition of reference conditions and the boundary between “high” and “good” status for 15 main lake types and five ecoregions of Europe: Alpine, Atlantic, Central/Baltic, Mediterranean, and Northern. Additionally, empirical models were developed for estimating site-specific reference chlorophyll-a concentrations from a set of potential predictor variables. The results were recently formulated into the EU legislation, marking the first attempt in international water policy to move from chemical quality standards to ecological quality targets.     

Environmental impact of APC residues from municipal solid waste incineration: reuse assessment based on soil and surface water protection criteria

Waste management and environmental protection are mandatory requirements of modern society. In our study, air pollution control (APC) residues from municipal solid waste incinerators (MSWI) were considered as a mixture of fly ash and fine particulate solids collected in scrubbers and fabric filters. These are hazardous wastes and require treatment before landfill. Although there are a number of treatment options, it is highly recommended to find practical applications rather than just dump them in landfill sites. In general, for using a construction material, beyond technical specifications also soil and surface water criteria may be used to ensure environmental protection. The Dutch Building Materials Decree (BMD) is a valuable tool in this respect and it was used to investigate which properties do not meet the threshold criteria so that APC residues can be further used as secondary building material. To this end, some scenarios were evaluated by considering release of inorganic species from unmoulded and moulded applications. The main conclusion is that the high amount of soluble salts makes the APC residues a building material prohibited in any of the conditions tested. In case of moulding materials, the limits of heavy metals are complied, and their use in Category 1 would be allowed. However, also in this case, the soluble salts lead to the classification of "building material not allowed". The treatments with phosphates or silicates are able to solve the problem of heavy metals, but difficulties with the soluble salts are still observed. This analysis suggests that for APC residues to comply with soil and surface water protection criteria to be further used as building material at least a pre-treating for removing soluble salts is absolutely required.     

Coupled effects of solution chemistry and hydrodynamics on the mobility and transport of quantum dot nanomaterials in the vadose zone

To investigate the coupled effects of solution chemistry and hydrodynamics on the mobility of quantum dot (QD) nanoparticles in the vadose zone, laboratory scale transport experiments involving single and/or sequential infiltrations of QDs in unsaturated and saturated porous media, and computations of total interaction and capillary potential energies were performed. As ionic strength increased, QD retention in the unsaturated porous media increased; however, this retention was significantly suppressed in the presence of a non-ionic surfactant in the infiltration suspensions as indicated by surfactant enhanced transport of QDs. In the vadose zone, the non-ionic surfactant limited the formation of QD aggregates, enhanced QD mobility and transport, and lowered the solution surface tension, which resulted in a decrease in capillary forces that not only led to a reduction in the removal of QDs, but also impacted the vadose zone flow processes. When chemical transport conditions were favorable (ionic strength of 5 × 10(-4)M and 5 × 10(-3)M, or ionic strengths of 5 × 10(-2)M and 0.5M with surfactant), the dominating phenomena controlling the mobility and transport of QDs in the vadose zone were meso-scale processes, where infiltration by preferential flow results in the rapid transport of QDs. When chemical transport conditions were unfavorable (ionic strength of 5 × 10(-2)M and 0.5M) the dominating phenomena controlling the mobility and transport of QDs in the vadose zone were pore-scale processes governed by gas-water interfaces (GWI) that impact the mobility of QDs. The addition of surfactant enhanced the transport of QDs both in favorable and unfavorable chemical transport conditions. The mobility and retention of QDs was controlled by interaction and capillary forces, with the latter being the most influential. GWI were found to be the dominant mechanism and site for QD removal compared with solid-water interfaces (SWI) and pore straining. Additionally, ripening phenomena were demonstrated to enhance QDs removal or retention in porous media and to be attenuated by the presence of surfactant.     

AMEG: the new SETAC advisory group on aquatic macrophyte ecotoxicology

Introduction and background

Primary producers play critical structural and functional roles in aquatic ecosystems; therefore, it is imperative that the potential risks of toxicants to aquatic plants are adequately assessed in the risk assessment of chemicals. The standard required macrophyte test species is the floating (non-sediment-rooted) duckweed Lemna spp. This macrophyte species might not be representative of all floating, rooted, emergent, and submerged macrophyte species because of differences in the duration and mode of exposure; sensitivity to the specific toxic mode of action of the chemical; and species-specific traits (e.g., duckweed's very short generation time).

Discussion and perspectives

These topics were addressed during the workshop entitled “Aquatic Macrophyte Risk Assessment for Pesticides” (AMRAP) where a risk assessment scheme for aquatic macrophytes was proposed. Four working groups evolved from this workshop and were charged with the task of developing Tier 1 and higher-tier aquatic macrophyte risk assessment procedures. Subsequently, a SETAC Advisory Group, the Macrophyte Ecotoxicology Group (AMEG) was formed as an umbrella organization for various macrophyte working groups. The purpose of AMEG is to provide scientifically based guidance in all aspects of aquatic macrophyte testing in the laboratory and field, including prospective as well as retrospective risk assessments for chemicals. As AMEG expands, it will begin to address new topics including bioremediation and sustainable management of aquatic macrophytes in the context of ecosystem services.