Valorization of pellets from municipal WWTP sludge in lightweight clay ceramics

A direct result of the growing number of municipal wastewater-treatment plants (WWTPs) has been an increase in the generation of large amounts of sewage sludge that requires environmentally acceptable final destination. To decrease the volume of sludge, a common technique is drying the sludge at a low temperature in rotary kilns. The result of this process is a granulated material consisting of dehydrated sludge pellets.After this treatment, this pelletized material becomes easier to manipulate, but it also becomes a more toxic waste, containing dangerous substances, mostly of the lipid type. At its final stage, this material is usually incinerated, used as a comburent material, used as an agricultural fertilizer, or used in the cement industry. Each application has its own problems and requires remediation measures from the safety and environmental viewpoints.In this study, we looked beyond these possible applications and analyzed the transformation of sewage sludge through a ceramization process into a material similar to expanded clays; we subsequently explored its uses in the building industry or in the agriculture industry, among others. Both the properties of the product material and the production method were characterized, and an environmental analysis was conducted.The new, lightweight material had a microstructure with open porosity and low thermal conductivity. Environmental characterization such as the leaching test revealed that undetectable amounts of hazardous metals from the sludge were present in the leachate after the sludge went through a thermal treatment, despite their initial presence (with the exception of vanadium, which could pose some restrictions on some of the proposed uses for the final product). Toxicity tests also showed negative results. The study of gaseous emissions during production revealed emissions factors similar to those during the production of conventional clay ceramics, although with higher organic emissions. As for conventional clay ceramics, industrial production would require the implementation of some type of air-depuration system. The results showed that the ceramization of sludge pellets is a promising valorization technique worth considering from both the economic and technological perspectives.     

Valorisation of forestry waste by pyrolysis in an auger reactor

Pyrolysis of forestry waste has been carried out in an auger reactor to study the influence of operational variables on the reactor performance and the properties of the related products. Pine woodchips were used for the first time as raw material and fed continuously into the reactor. Ten experiments were carried out under inert atmosphere at: (i) different reaction temperature (1073, 973, 873, 823 and 773 K); (ii) different solid residence time (5, 3, 2 and 1.5 min); and (iii) different biomass flow rate (3.9, 4.8 and 6.9 kg/h). Results show that the greatest yields for liquid production (59%) and optimum product characterisation were obtained at the lowest temperature studied (773 K) and applying solid residence times longer than 2 min. Regarding bio-oil properties, GC/MS qualitative identification show that the most abundant compounds are volatile polar compounds, phenols and benzenediols; and very few differences can be observed among the samples regardless of the pyrolysis operating conditions. On the whole, experimental results demonstrate that complete reaction of forest woodchips can be achieved in an auger reactor in most of the experimental conditions tested. Moreover, this study presents the initial steps for the future scaling up of the auger reactor with the aim of converting it into a mobile plant which will be able to remotely process biomass such as energy crops, forestry and agricultural wastes to obtain bio-oil that, in turn, can be used as energy vector to avoid high transport costs.     

Stakeholder analysis for industrial waste management systems

Stakeholder approaches have been applied to the management of companies with a view to the improvement of all areas of performance, including economic, health and safety, waste reduction, future policies, etc. However no agreement exists regarding stakeholders, their interests and levels of importance. This paper considers stakeholder analysis with particular reference to environmental and waste management systems. It proposes a template and matrix model for identification of stakeholder roles and influences by rating the stakeholders. A case study demonstrates the use of these and their ability to be transferred to other circumstances and organizations is illustrated by using a large educational institution.     

Patterns of Predation Risk and Survival of Bird Nests in a Chilean Agricultural Landscape

Abstract: We used experimental nests baited with California Quail (  Callipepla californica ) eggs or clay eggs to examine relative risks of nest predation in an agricultural landscape and in two large forest preserves in a south-temperate rainforest in Chile. The most common predators, as identified by marks on clay eggs, were a caracara (   Milvago chimango ), a blackbird ( Curaeus curaeus ), and rodents. Nest losses from predation were similar in large and small forest patches and lower in patches than in extensive forest. In general, predation risk was higher (and nest survival therefore lower) on forest edges than in forest interior, in short-grass pasture than in tall-grass pasture, in narrow corridors than in wide corridors, and on visible nests than on concealed nests. High predation risks in pasture habitat tended to increase the risk of nest predation in adjacent forest edges. For open-cup nesters, the risk of nest predation was relatively high in the present agricultural landscape, indicating that much of the available wooded habitat (  forest edges, narrow corridors) offers poor nesting habitat, although it may be suitable for foraging and traveling. The numerous bird-plant mutualisms in this landscape may be at risk if nesting success of the principal mutualists is consistently low.     

Transport of organic contaminants through salinity stratified water masses. A microcosm experiment

A salt-wedge stratified microcosm, spiked with 31 target analytes, including PCBs, organochlorine and organophosphorous pesticides, triazines, organophosphate flame retardants and caffeine (an urban wastewater molecular marker), was setup. Compound behaviour was monitored during a four week period, by sampling at six different levels of the water column, in order to understand the transport and loss processes of the different classes of chemical substances. Compound transport from one water body to the other has been positively correlated with diffusion via their molar volume. Target analytes loss has been positively correlated with evaporation via their K(H) and with degradation via their halve-lives. From these two processes, evaporation was found to be predominant using a multiparametric regression.     

Spatial and temporal trends of polycyclic aromatic hydrocarbons in wild mussels from the Cantabrian coast (N Spain) after the Prestige oil spill

Polycyclic aromatic hydrocarbon (PAH) levels were determined in tissues of wild mussels (Mytilus galloprovincialis) collected at 17 stations along the Cantabrian coast (N Spain), from Navia (Asturias) to Fuenterrabía (Basque Country), in order to assess the extent of the environmental impact caused by the Prestige oil spill (November 13, 2002). Six sampling campaigns were carried out in April, June and November in 2003 and 2004. The comparison of PAH data with those obtained earlier in 2000 showed a widespread pyrolytic and petrogenic contamination and allowed an estimation, for the first time, of the background pollution in the region and identification of the chronic hotspots. The spatial distribution found in the first samples after the oil spill revealed the eastern area as the most affected due to the continuous arrival of fuel slicks since early summer 2003. Several stations in this area showed increased total PAH concentrations of up to 15 times the pre-spill levels, which did not recover until April 2004, more than one year after the accident. Molecular parameters within the aliphatic and aromatic fractions were determined to assess the presence of Prestige oil in these samples.     

Assessment of the Mediterranean sediments contamination by persistent organic pollutants

A compilation of information about levels of selected persistent organic pollutants, namely polychlorinated biphenyls (PCBs), dichlorodiphenyltrichloroetane and its degradation products (DDTs) and hexachlorobenzene (HCB), in Mediterranean sediments, including data published from 1971 to 2005, has been conducted in order to assess their main drivers and pressures in the environment. The application of mapping tools (GIS) and statistical instruments enabled the assessment of geographical and temporal trends. Chemical contamination mainly originates from land-based sources, and decreases significantly when moving off-shore. Contamination hot spots are generally located along the Northern coastline. The data for open sea sediments enabled the establishment of background levels of contamination for the region. A decreasing temporal trend in concentrations was found, more evident in the case of DDTs probably due to a more efficient regulation of this chemical. Finally, some gaps in reliable data were also identified which were related to the lack of information in the southern and eastern parts of the Mediterranean as well as the variety of analytical methodologies used.     

Comparison of the industrial source complex and AERMOD dispersion models: case study for human health risk assessment

Air quality models are typically used to predict the fate and transport of air emissions from industrial sources to comply with federal and state regulatory requirements and environmental standards, as well as to determine pollution control requirements. For many years, the U.S. Environmental Protection Agency (EPA) widely used the Industrial Source Complex (ISC) model because of its broad applicability to multiple source types. Recently, EPA adopted a new rule that replaces ISC with AERMOD, a state-of-the-practice air dispersion model, in many air quality impact assessments. This study compared the two models as well as their enhanced versions that incorporate the Plume Rise Model Enhancements (PRIME) algorithm. PRIME takes into account the effects of building downwash on plume dispersion. The comparison used actual point, area, and volume sources located on two separate facilities in conjunction with site-specific terrain and meteorological data. The modeled maximum total period average ground-level air concentrations were used to calculate potential health effects for human receptors. The results show that the switch from ISC to AERMOD and the incorporation of the PRIME algorithm tend to generate lower concentration estimates at the point of maximum ground-level concentration. However, the magnitude of difference varies from insignificant to significant depending on the types of the sources and the site-specific conditions. The differences in human health effects, predicted using results from the two models, mirror the concentrations predicted by the models.     

Socioecological transition in the Cauca river valley,Colombia (1943–2010): towards an energy–landscape integrated analysis

Regional Environmental Change - Agroecosystems are facing a global challenge amidst a socioecological transition that places them in a dilemma between increasing land-use intensity to meet the...     

Forests and global change: what can genetics contribute to the major forest management and policy challenges of the twenty-first century?

The conservation and sustainable use of forests in the twenty-first century pose huge challenges for forest management and policy. Society demands that forests provide a wide range of ecosystem services, from timber products, raw materials and renewable energy to sociocultural amenities and habitats for nature conservation. Innovative management and policy approaches need to be developed to meet these often-conflicting demands in a context of environmental change of uncertain magnitude and scale. Genetic diversity is a key component of resilience and adaptability. Overall, forest tree populations are genetically very diverse, conferring them an enormous potential for genetic adaptation via the processes of gene flow and natural selection. Here, we review the main challenges facing our forests in the coming century and focus on how recent progress in genetics can contribute to the development of appropriate practical actions that forest managers and policy makers can adopt to promote forest resilience to climate change. Emerging knowledge will inform and clarify current controversies relating to the choice of appropriate genetic resources for planting, the effect of silvicultural systems and stand tending on adaptive potential and the best ways to harness genetic diversity in breeding and conservation programs. Gaps in our knowledge remain, and we identify where additional information is needed (e.g., the adaptive value of peripheral populations or the genetic determinism of key adaptive traits) and the types of studies that are required to provide this key understanding.