Quantification of PCDD/F concentrations in animal manure and comparison of the effects of the application of cattle manure and sewage sludge to agricultural land on human exposure to PCDD/Fs

PCDD/Fs were quantified in samples of cattle, pig, sheep and chicken manure. TEQs ranged from 0.19 ng TEQ/kg dw for the pig manure to 20 ng TEQ/kg dw for one cattle manure sample. Exposure assessments were carried out to compare the effect of various sewage sludge and cattle manure land application scenarios on human PCDD/F exposure. Background exposure was estimated at 4.9 pg TEQ/kg bw/day and it was found that land application of sewage sludge and cattle manure at contemporary rates did not increase PCDD/F TEQ background exposure. It was concluded that the application of sewage sludge, under the new UK guidelines, and cattle manure to agricultural land, do not make a significant contribution to human exposure to PCDD/Fs.     

Relationship between volatile organohalogen compounds in drinking water and human urine in Poland

Selected volatile organohalogen compounds (VOX) were investigated in urine samples from people living in different areas of the Gdańsk-Sopot-Gdynia TriCity (Poland). The analytes were isolated and preconcentrated using the so-called thin layer headspace technique with autogenous generation of the liquid sorbent. Final gas chromatographic determination was carried out by direct aqueous injection with electron capture detection. Analyte concentrations in drinking water ranged from not detected to approximately 8 microg/l (chloroform), depending on the source of drinking water in a given part of the TriCity (underground, surface or mixed). The corresponding urine levels were typically lower by about an order of magnitude. VOX levels in urine of people living in the parts of the TriCity supplied with drinking water containing elevated levels of the analytes were higher than the levels in urine of people whose drinking water originated from deep underground wells. The linear correlation coefficients for the relationships between total VOX and chloroform levels in drinking water and in urine were r2=0.65 and 0.88, respectively. The fraction of VOX excreted with urine in unchanged form did not exceed 20%.     

Simultaneous removal of NOx,SO2, and Hg from flue gas in FGD absorber with oxidant injection (NaClO2)– full-scale investigation

ABSTRACT

This article presents the results of an industrial-scale study (on 400 MW_e lignite fired unit) of simultaneous NO_x, SO₂, and Hg^T removal in FGD absorber with oxidant injection (NaClO₂) into flue gas. It was confirmed that the injection of sodium chlorite upstream the FGD (Flue Gas Desulfurization) absorber oxidize NO to NO₂, Hg⁰ to Hg²⁺, and enhancing NO_x and Hg^T removal efficiency from exhaust gas in FGD absorber. Mercury removal efficiency grows with the rise of degree of oxidation NO to NO₂ and was limited by the phenomenon of re-emission. For NO_x removal the most critical parameters is slurry pH and temperature. There was no negative effect on sulfur dioxide removal efficiency caused by oxidant injection in tested FGD absorber. Based on the data provided, NO_x and Hg^T emissions can be reduced by adjusting the FGD absorber operating parameters combined with oxidant injection.     

Impact assessment of climate policy on Poland's power sector

This article addresses the impact of the European Union Emissions Trading System (EU ETS) on Poland’s conventional energy sector in 2008–2020 and further till 2050. Poland is a country with over 80% dependence on coal in the power sector being under political pressure of the European Union’s (EU) ambitious climate policy. The impact of the increase of the European Emission Allowance (EUA) price on fossil fuel power sector has been modelled for different scenarios. The innovation of this article consists in proposing a methodology of estimation actual costs and benefits of power stations in a country with a heavily coal-dependent power sector in the process of transition to a low-carbon economy. Strong political and economic interdependence of coal and power sector has been demonstrated as well as the impact caused by the EU ETS participation in different technology groups of power plants. It has been shown that gas-fuelled combined heat and power units are less vulnerable to the EU ETS-related costs, whereas the hard coal-fired plants may lose their profitability soon after 2020. Lignite power plants, despite their high emissivity, may longer remain in operation owing to low operational costs. Additionally, the results of long-term, up to 2050, modelling of Poland’s energy sector supported an unavoidable need of deep decarbonisation of the power sector to meet the post-Paris climate objectives. It has been concluded that investing in coal-based power capacity may lead to a carbon lock-in of the power sector. Finally, the overall costs of such a transformation have been discussed and confronted with the financial support offered by the EU. The whole consideration has been made in a wide context of changes ongoing globally in energy markets and compared with some other countries seeking transformation paths from coal. Poland’s case can serve as a lesson for all countries trying to reduce coal dependence in power generation. Reforms in the energy sector shall from the very beginning be an essential part of a sustainable transition of the whole nation’s economy. They must scale the power capacity to the future demand avoiding stranded costs. The reforms must be wide-ranging, based on a wide political consensus and not biased against the coal sector. Future energy mix and corresponding technologies shall be carefully designed, matched and should remain stable in the long-term perspective. Coal-based power capacity being near the end of its lifetime provides an economically viable option to commence a fuel switch and the following technology replacement. Real benefits and costs of the energy transition shall be fairly allocated to all stakeholders and communicated to the society. The social costs and implications in coal-dependent regions may be high, especially in the short-term perspective, but then the transformation will bring profits to the whole society.     

Analysis of occupational accidents: prevention through the use of additional technical safety measures for machinery

This article presents an analysis of results of 1035 serious and 341 minor accidents recorded by Poland's National Labour Inspectorate (PIP) in 2005–2011, in view of their prevention by means of additional safety measures applied by machinery users. Since the analysis aimed at formulating principles for the application of technical safety measures, the analysed accidents should bear additional attributes: the type of machine operation, technical safety measures and the type of events causing injuries. The analysis proved that the executed tasks and injury-causing events were closely connected and there was a relation between casualty events and technical safety measures. In the case of tasks consisting of manual feeding and collecting materials, the injuries usually occur because of the rotating motion of tools or crushing due to a closing motion. Numerous accidents also happened in the course of supporting actions, like removing pollutants, correcting material position, cleaning, etc.     

Allometric scaling and accidents at work

Allometry is the knowledge concerning relations between the features of some beings, like animals, or cities. For example, the daily energy rate is proportional to a mass of mammals rise of 3/4. This way of thinking has spread quickly from biology to many areas of research concerned with sociotechnical systems. It was revealed that the number of innovations, patents or heavy crimes rises as social interaction increases in a bigger city, while other urban indexes such as suicides decrease with social interaction. Enterprise is also a sociotechnical system, where social interaction and accidents at work take place. Therefore, do these interactions increase the number of accidents at work or, on the contrary, are they reduction-driving components? This article tries to catch such links and assess the allometric exponent between the number of accidents at work and the number of employees in an enterprise.     

Environmental risk assessment for trisodium [S,S]-ethylene diamine disuccinate, a biodegradable chelator used in detergent applications

Environmental safety data are presented for [S,S]-Ethylene Diamine Disuccinate ([S,S]EDDS), a new, biodegradable, strong transition metal chelator. An environmental risk assessment for its use in detergent applications, which takes into account the chelating properties of [S,S]-EDDS, is proposed.

A property of [S,S]-EDDS that distinguishes it from other strong transition metal chelators is its, “ready” and transparent (no recalcitrant metabolites) biodegradation profile. Because its sorption to activated sludge solids is low ( Kp of 40 1/kg), removal of [S,S]EDDS during sewage treatment, which is greater than 96% as determined by the Continuous Activated Sludge test , is mainly ascribed to biodegradation. At projected use volumes in detergent applications [S,S] - EDDS predicted steady-state concentration in rivers leaving the mixing zone will be below 5 pg/I due to rapid biodegradation. [S,S]-EDDS exhibits low toxicity to fish and Daphnia ( both EC₅₀s> 1000 mg/l). By contrast, due to limitation of the algal test for chelators apparent toxicity was observed (EC₅₀ = 0.290 mg/l, NOEC - No observable Effect Concentration = 0.125 mg/l). Schowanek et al. [1] demonstrated that this is not toxicity sensu stricto but a chelation effect of trace metals in the test medium and of resulting essential nutrients limitation. This requires specific attention when the results of algal toxicity are to be extrapolated to a field situation to perform realistic risk assessment. Metal speciation calculations, using MINEQL+, show that at the predicted environmental concentrations of [S,S] - EDDS (1–5 μg/l), such a chelation effect would be insignificant. These calculations allow to estimate the NOEC for chelation effects in the field to be in the range of 0.250-0.500 mg/l, depending on the background water chemistry. These values are well above the laboratory NOEC.

An environmental risk assessment was performed using the EUSES (1.0) program. EUSES is currently the EU recommended tool for conducting risk assessments (TGD 1995). It was applied to estimate the river water and soil concentrations from production, formulation and private use life stages. The estimated PEC/PNEC ratio in all relevant environmental compartments is smaller than 1, indicating “no immediate concern” at the anticipated usage level.