Total organic carbon analysis as a precursor to disinfection byproducts in potable water: oxidation technique considerations

In recent years, an increasing number of regulations and methodologies have begun to utilize total organic carbon (TOC) analysis for monitoring microbial contamination and/or disinfectant byproduct (DBP) precursors. This paper highlights some analytical differences and similarities between the two widely used TOC oxidation techniques: UV persulfate and high temperature combustion (HTC). Previous papers have come to different and sometimes contradictory conclusions on this subject. However, these studies either compared instruments with significantly different flow paths or TOC systems from different eras. Unlike previous studies, this paper compares two modern TOC analyzers with nearly identical flow paths for sample recovery, detection limits, and analysis of real world samples. On average, both persulfate and HTC oxidation yielded good recoveries for 10 hard to oxidize compounds and potable water samples from 5 different locations across the USA. In general, persulfate yielded more precise results because of its lower background response relative to sample response while HTC gave slightly higher results (roughly 2% to 3%) for surface water samples.     

A WATER QUALITY‐BASED APPROACH FOR WATERSHED WIDE BMP STRATEGIES1

ABSTRACT: Watershed management strategies generally involve controlling nonpoint source pollution by implementing various best management practices (BMPs). Currently, stormwater management programs in most states use a performance‐based approach to implement onsite BMPs. This approach fails to link the onsite BMP performance directly to receiving water quality benefits, and it does not take into account the combined treatment effects of all the stormwater management practices within a watershed. To address these issues, this paper proposes a water quality‐based BMP planning approach for effective nonpoint source pollution control at a watershed scale. A coupled modeling system consisting of a watershed model (HSPF) and a receiving water quality model (CE‐QUAL‐W2) was developed to establish the linkage between BMP performance and receiving water quality targets. A Monte Carlo simulation approach was utilized to develop alternative BMP strategies at a watershed level. The developed methodology was applied to the Swift Creek Reservoir watershed in Virginia, and the results show that the proposed approach allows for the development of BMP strategies that lead to full compliance with water quality requirements.     

From Poole to Fulham: A Changing Culture in UK Environmental Impact Assessment Decision Making?

This paper examines the role of environmental impact assessment (EIA) in project authorization decision making and the way in which the courts have interpreted its role. The purpose of the paper is to establish whether or not that role has changed over the period between the introduction of EIA in 1988 and 2001. From the evidence reported here, it is argued that while the procedural stages of EIA have been very much strengthened over that period, the importance of EIA as a tool to aid planning authorization decision making remains largely peripheral.     

Tundra disturbance and ecosystem production: Implications for impact assessment

Environmental regulations governing industrial activities in tundra environments stem largely from the expected ecological effects of the activities. One of the major ecological effects of industrial activities is the surface subsidence associated with thermokarst, which can result in changes in primary and secondary production. The primary production changes associated with thermokarst are strongly governed by three ecosystem properties—soil temperature, water regime, and nutrient availability. Most disturbances set in motion a more-or-less predictable sequence of landscape change related to these properties: soil warming, thermokarst, surface flooding, accelerated organic matter decomposition, and increased nutrient availability. The warmed soil and the enhanced nutrient availability typically lead to increased annual primary production, increased dominance by graminoids, and reduced plant species diversity. These vegetational changes may in turn potentially enhance secondary production, but in general these second-level responses have yet to be quantified. More information is needed about the food-chain effects of tundra landscape disturbances before regulators can make well-informed predictions of impacts or plan useful habitat rehabilitation.     

Environmental regulatory compliance on army lands: A case study

A “finding of no significant impact” (FONSI) resulting from an environmental assessment (EA) was reported by the US Army in June 1986 for the construction and utilization of a multipurpose range complex (MPRC) at the Pohakuloa Training Area, Hawaii. There was little public response, and the US Fish and Wildlife Service and state agencies were consulted and had few comments concerning the results of the botanical surveys used in the assessment. Construction of the $24 million project was begun in 1988. Near the end of construction in 1989 a lawsuit was filed to halt construction because an environmental impact statement (EIS) had not been done for the project, and the plaintiff thought that significant damage had occurred to several unusual ecosystems. Judgment was against the plaintiff and construction continued. An appeal was filed with the 9th Circuit Court. As MPRC construction was nearly complete, and on advice of Department of Justice lawyers, the Department of Army agreed to settle out of court. The settlement in part called for: (1) the plaintiff to drop the appeal and allow construction to be completed as scheduled, and (2) the Department of Army to prepare an EIS for the operation of the MPRC. A subsequent botanical survey for the EIS discovered one endangered plant species, four category 1 candidate plant species (taxa with sufficient data to support listing as endangered or threatened), three category 2 candidate plant species (taxa with some evidence of vulnerability but insufficient data to support listing at this time), one category 3a species (presumably extinct taxa), and possibly three undescribed species growing within the MPRC boundary. The MPRC case study is an excellent example of why the National Environmental Policy Act (NEPA) must be modified to require in-depth and thorough environmental surveys.     

SIMULATION/OPTIMIZATION TECHNIQUES FOR MULTI-BASIN WATER RESOURCE PLANNING1

A set of simulation and optimization tools capable of analyzing the development and operation of a complex, multi-basin, interconnected water resource are explained. These models provide valuable information regarding the important questions: (1) “When should new projects be build?” (2) “How big should they be?” and (3) “How should the system be operated?” Since these tools were developed by and for practicing engineers, their applicability to real-world problems is mandatory. To assure this, testing was done on an actual proposed project, the Texas Water System.     

Incubation time effects on imazaquin desorption as determined by nonequilibrium thin-soil disc flow

Because organic sorption in soil may never reach equilibrium, a thin-disc flow nonequilibrium method may be helpful in understanding herbicide-soil interactions. This research was conducted to (i) determine the influence of incubation time on imazaquin [2-(4,5-dihydro-4-methyl-4-(1-methylethyl)-5-oxo-1H-imidazol-2-yl)-3-quinolinecarboxylic acid] desorption from soil, (ii) examine the influence of solution flow velocities on desorption, and (iii) elucidate the most appropriate kinetic model to describe imazaquin leaching. Soil at 7.5% moisture w/w was treated with imazaquin and incubated for 24, 72, and 168 h. Treated soil was sealed in an in-line filter apparatus and rinsed with 5.0 mM CaCl2 at 0.33, 0.67, or 1.0 mL min(-1). Effluent was collected as 1.0-mL fractions for a total of 50 mL. Flow was stopped for 24 h. When flow resumed, fractions were collected for an additional 15 mL. After the initial desorption, 79% of the imazaquin incubated for 24 h was leached. Increasing incubation time beyond 24 h reduced imazaquin leaching. After both desorption events, 13% of the initially applied imazaquin remained in the soil incubated for 168 h, compared with 7% with soil incubated for 24 h. Elovich and Freundlich kinetics accounted for 98% of the variance observed in the imazaquin desorption curves. First-order and diffusion kinetics accounted for 91% of the variance. Incubating soil for 72 h before desorption reduced the rate of imazaquin desorption by approximately 12%, compared with the 24-h incubation treatment. Imazaquin desorption was not affected by wash solution flow rate. These data suggest that the kinetics of desorption in prolonged desorption events are limited by transport phenomena (i.e., particle and film diffusion).     

Prediction of cervical spine injury risk for the 6-year-old child in frontal crashes

This article presents a series of 49 km/h sled tests using the Hybrid III 6-year-old dummy in a high-back booster, a low-back booster, and a three-point belt. Although a 10-year review at a level I trauma center showed that noncontact cervical spine injuries are rare in correctly restrained booster-age children, dummy neck loads exceeded published injury thresholds in all tests. The dummy underwent extreme neck flexion during the test, causing full-face contact with the dummy's chest. These dummy kinematics were compared to the kinematics of a 12-year-old cadaver tested in a similar impact environment. The cadaver test showed neck flexion, but also significant thoracic spinal flexion which was nonexistent in the dummy. This comparison was expanded using MADYMO simulations in which the thoracic spinal stiffness of the dummy model was decreased to give a more biofidelic kinematic response. We conclude that the stiff thoracic spine of the dummy results in high neck forces and moments that are not representative of the true injury potential.     

Using nonequilibrium thin-disc and batch equilibrium techniques to evaluate herbicide sorption

Nonequilibrium disc-flow techniques may better reproduce dynamic soil-pesticide interactions than traditional batch sorption studies. Batch kinetic and equilibrium experiments and dual-label thin-disc flow experiments were conducted with atrazine (6-chloro-N-ethyl-N'-isopropyl-1,3,5-triazine-2,4-diamine) and imazaquin [2-(4,5-dihydro-4-methyl-4-(1-methylethyl)-5-oxo-1H-imidazol-2-yl)-3-quinolinecarboxylic acid] using a Demopolis silt loam (loamy-skeletal, carbonatic, thermic, shallow Typic Udorthent; 8% clay, 62 g kg(-1) organic matter, 7.6 pH). Batch kinetic studies with both herbicides revealed an almost instantaneous rapid phase and a much slower gradual phase. The rapid phase was complete after 5 min and equilibrium was reached at 24 h. The rapid phase accounted for 74% and 12 to 30% of the total amounts adsorbed for atrazine and imazaquin, respectively. The sorption of both the rapid and 24-h isotherms for each herbicide best fit the Freundlich equation. The rapid and 24-h K(f) values of atrazine were 1.38 and 2.41, respectively, and the N value of both phases was approximately 0.93. For imazaquin, the rapid and 24-h K(f) values were 0.056 and 035, respectively, and the N value for the rapid phase of imazaquin was 0.71, compared with 0.86 for the 24-h isotherm. In the dual-label thin-disc flow experiments, the average partition coefficient for atrazine at the peak soil concentration point was 1.54. This value closely agreed with the observed rapid-phase K(f) value of 1.38. In contrast, the thin-disc flow experiments failed to detect any imazaquin retention. The thin-disc flow method can allow for a greater resolution of rapid sorption kinetics, which is impractical with batch studies. Along with dynamic partitioning data, the thin-disc flow method may provide kinetics data that may better complement environmental models than coefficients generated with batch techniques.     

Production of radioactive particles for use in environmental studies

This paper presents an aerosol generation technique developed to produce dry aerosol particles of various sizes from aqueous solutions of salt. The technique was tested with sodium chloride, lithium carbonate and uranyl acetate at various aqueous concentrations which produced particles in the size range of 0.13-1.37 microm Mass Median Diameter (MMD). The generated aerosols were acceptably monodisperse with a geometric standard deviation of 1.4-2. Both MMD and Mass Median Aerodynamic Diameter (MMAD) increased significantly (p<0.001) with increased concentration of the salt in solution. The technique can also be used to generate aerosols of different chemical species. The results obtained indicate that the system is convenient for use with various aerosol-forming materials, with a stable particle size distribution being maintained for a long period of steady operation. The technique was successfully applied in wind tunnel studies to simulate the release of submicron radioactive particles and their interception by crops, grass and tree canopies. The relevance and application of the technique in other areas of environmental assessment studies is discussed.