Modelling of Air Quality with CAMx: A Case Study in Switzerland

The three-dimensional Eulerian model CAMx (Comprehensive Air QualityModel with Extensions) was applied for the first time to simulate bothgaseous and particulate photochemical air pollution in Switzerland during July 28–30, 1993. The meteorological input data were prepared using the Systems Applications International Mesoscale Model (SAIMM). The CAMx model results were compared with the measurements carried out at ground level andfrom airborne measuring platforms within the frame of the Swiss POLLUMET research programme. In general, the CAMx performance for gaseous species wasfound to be better than that of the previously used Urban Airshed Model (UAM)and the Variable Grid Urban Airshed Model (UAM-V). The most significant improvement for the gaseous species is in the prediction of HNO₃ concentrations, due to the inclusion of aerosol chemistry. Aerosol species such as NO₃ ^-, NH₄ ⁺, SO₄ ^2-, and secondary organic aerosols were calculated in one particle size range (0.04–2.5 m) and compared with a few measurements available. Although July 29 was reasonably well simulated, overestimated wind speeds by SAIMM for July 30 caused a too fast transport of pollutants. Similarly to measurements, significant spatial correlation of the secondarily formed aerosols with ozone and formaldehyde is found in the afternoon.     

Thermal constraints on prey-capture behavior of a burrowing spider in a hot environment

Summary Seothyra henscheli (Eresidae) is a burrowing spider that lives in the dune sea of the southern Namib Desert, Namibia. Prey capture by these spiders involves a foray from a cool subterranean retreat to the undersurface of a capture web that can be lethally hot. Striking, disentangling and retrieving prey from the capture web typically involves several short trips to the capture web, alternating with retreats to the cool burrow. It has been suggested that this behavior limits the increase of body temperature a spider must experience while working at the hot capture web. We used biophysical models in conjunction with direct observations of prey-capture behavior and distributions of sand temperature to estimate body temperatures experienced by S. henscheli during prey capture. In the circumstances we observed, only the relatively long post-strike retreat from the capture web is important in keeping spiders' body temperatures from exceeding their lethal limits. After the post-strike retreat, shuttling appreciably limits the increase in body temperature of small individuals, but may have little effect on body temperature increase in larger spiders. Correspondence to: J.S. Turner at the present address     

Twin climate cities—an exploratory study of their potential use for awareness-raising and urban adaptation

Twin climate cities are pairs of cities for which it is appropriate to assume that the future climate of a city “A” will be significantly similar to the current climate of another city “B”. In this paper, we explore the potential use of the climate twins approach for the development of adaptation strategies to climate change in urban areas. We propose an innovative and robust climate-matching method that is suitable to link cities’ current and future climates. Of the 100 cities investigated, 70 have at least one twin climate region, and 39 have a twin climate city. The case-study revealed a highly significant similarity for temperature variables and heat-related indices, but a less significant similarity for precipitation variables. The Climate Twins approach appears to be a potentially effective mechanism for raising awareness about the pace of climate change and for easily identifying (1) future impacts and vulnerabilities associated with climate change as well as (2) policies, infrastructure, and best practices that should be implemented in a city in order to cope efficiently with future extreme temperature events.     

Bees use three-dimensional information to improve target detection

Bumblebee detection of a flat circular disc (two-dimensional (2D) presentation) and a disc which was presented 10 cm in front of a structured background (and thus provided three-dimensional (3D) cues) was compared. A dual choice test using a Y-maze apparatus was conducted to estimate the minimum visual angle at which the bees were able to detect the disc. At large visual angles of 15, 10 and 5° bees’ performance between the 2D and the 3D presentation did not differ. However, when the disc subtended 3° at the bee’s eye, the bees performed significantly better when 3D information was available. Overall, bees were able to detect a target subtending a 40% smaller visual angle when it was presented in front of the structured background compared to a 2D presentation. This suggests that previous reports on the limits of target detection in bees using flat stimuli might have underestimated the bees’ ability to locate small flowers under natural conditions. Bees use motion parallax, i.e. the apparent relative motion of a stationary object against a background, for perceiving the third dimension. Our data suggest that bumblebees can integrate information from at least two types of feature detectors, motion and area, to improve single target detection.     

Provenancing of archeological pumice finds from North Sinai

Seven pumice samples from excavations in North Sinai have been investigated with respect to their geochemical composition. This type of volcanic rock has been used as an abrasive and thus has been an object of trade since antiquity. With the help of Instrumental Neutron Activation Analysis, six of these Bronze Age samples could be correlated to their volcanic sources on the islands of Santorini, Nisyros and Giali (Greece) using the typical element concentrations (“chemical fingerprint”). The source of one pumice sample remains unidentified excluding, however, the Santorini eruption as a possible source. The concluding section of this article discusses the possible contribution, however indirect, of the pumice from Sinai and elsewhere in the Eastern Mediterranean to the controversial issue of the accurate date of the “Minoan” eruption of Santorini.     

The theory of inventive problem solving (TRIZ) as option generation tool within cleaner production projects

Cleaner Production is an organized approach to minimize industrial waste and emissions by increasing the efficiency of the use of materials and energy. It is propagated especially by UNIDO and UNEP as an approach to identify preventive measures to cut on waste and emissions from industrial activities. Case studies conducted by the authors in the last 10 years demonstrate, that in a number of cases water consumption per production unit of industries from the surface treatment sector, from food processing and from the textile industry could be reduced by 30–90%, auxiliary materials consumption could be reduced by 30–50%, and energy consumption of processes could be reduced by 15–25%. All these measures were actually economically beneficial for the companies, most of these measures paid back in less than one year [1].The standard approach to apply Cleaner Production originates from chemical engineering. It follows the steps of: Drawing a process flow sheet – collecting input/output data – doing mass and energy balances – identify sources for waste and emissions – set priorities – identify options. In the process of option generation one generally relies on expert knowledge or on checklists which are available in different manuals or in the best available technology reference (BREF) notes.¹ This approach is strong with teams with an (chemical) engineering background.The authors wanted to develop a generic approach for option identification especially for teams with little formal engineering background or teams which have to go beyond their professional experience by using elements of the so-called TRIZ method (Theory of inventive problem solving, or originally Russian: “

” (Teoria reschenija isobretatjelskich sadatsch)). TRIZ offers very strong tools for developing process improvement options on a generic level without specific technological knowledge about the process which shall be improved. The authors have found from their research that especially the concept of the Ideal Final Result, and the Laws of Evolution form a conceptual framework which can aid effectively in the identification of improvement options in a systematic way.     

Effect of competing solutes on arsenic（Ⅴ） adsorption using iron and aluminum oxides

The study focused on the effect of several typical competing solutes on removal of arsenic with Fe_2O_3 and AL_2O_3.The test results indicate that chloride,nitrate and sulfate did not have detectable effects,and that selenium(Ⅳ)(Se(Ⅳ))and vanadium(Ⅴ)(V(Ⅴ)) showed slight effects on the adsorption of As(Ⅴ)with Fe_2O_3.The results also showed that adsorption of As(Ⅴ)on AL_2O_3 was not affected by chloride and nitrate anions,but slightly by Se(Ⅳ)and V(Ⅴ)ions.Unlike the adsorption of As(Ⅴ)with Fe_2O_3,that with Fe_2O_3 was affected by the presence of sulfate in water solutions.Both phosphate and silica have significant adverse effects on the adsorption of As(Ⅴ)adsorption with Fe_2O_3 and Al_2O_3.Compared to the other tested anions,phosphate anion was found to be the most prominent solute affecting the As(Ⅴ)adsorption with Fe_2O_3 and Al_2O_3.In general,Fe_2O_3 has a better performance than Al_2O_3 in removal of As(Ⅴ)within a water environment where multi competing solutes are present.